The Severe Wind Hazard Assessment for Queensland - SWHA(Q), is a collaborative project between Geoscience Australia (GA) and Queensland Fire and Emergency Services (QFES) which aims to provide realistic and tangible information on the potential physical impacts of tropical cyclones on Queensland communities. This is intended to enable the emergency management sector and Local Governments to more effectively engage with the community on the current and future risks posed by cyclones and inform long term strategic risk management strategies.

This GA Record report is one of a series of 4 reports undertaken by the GA Groundwater Group under the National Collaboration Framework Project Agreement with the Office of Water Science (in the Department of the Environment). The report was originally submitted to the OWS in July 2013, and subsequently reviewed by Queensland government. The Maryborough Basin in Queensland is a priority coal-bearing sedimentary basin that is not currently slated for Bioregional Assessment.

<p>The outcrop extent of the McBride Basalt Province, selected from the Queensland Detailed Surface Geology vector polygon mapping, March 2017. <p>© State of Queensland (Department of Natural Resources and Mines) 2017 Creative Commons Attribution

Interpretation of the Thomson Orogen and its context within the Tasmanides of eastern Australia is hampered by vast areas of deep sedimentary cover which also mask potential relationships between central and eastern Australia. Within covered areas, basement drill cores offer the only direct geological information. This study presents new detrital zircon isotopic data for these drill cores and poorly understood outcropping units to provide new age and provenance information on the Thomson Orogen. Two distinct detrital zircon signatures are revealed. One is dominated by Grenvillian-aged (1300900 Ma) zircons with a significant peak at ~1180 Ma and lesser peak at ~1070 Ma. These age peaks, along with Lu-Hf isotopic compositions (median Hf(t) = +1.5), dominantly mantle-like 18O values (median = 5.53) and model ages of ~1.89 Ga, support a Musgrave Province (central Australia) source. The dominance of Grenvillian-aged material additionally points to deposition during the Petermann Orogney (570530 Ma) when the Musgrave Province was uplifted shedding abundant material to the Centralian Superbasin. Comparable age spectra suggest that parts of the Thomson Orogen were connected to the Centralian Superbasin during this period. We use the term `Syn-Petermann to describe this signature which is observed in two drill cores adjacent to the North Australian Craton and scattered units in the outcropping Thomson Orogen. The second signature marks a significant provenance shift and is remarkably consistent throughout the Thomson Orogen. Age spectra exhibit dominant peaks at 600560 Ma, lesser 1300900 Ma populations and maximum depositional ages of ~496 Ma. This pattern is termed the `Pacific Gondwana detrital zircon signature and is recognised throughout eastern Australia, Antarctica and central Australia. LuHf isotope data for Thomson Orogen rocks with this signature is highly variable with Hf(t) values between -49 and +10 and dominantly supracrustal 18O values suggesting input from different and more diverse source regions.

This GA Record is one of a series of 4 reports completed by the GA Groundwater Group under the National Collaboration Framework Project Agreement with the Office of Water Science (Dept of the Environment). The report was originally submitted to OWS as a GA Professional Opinion, and was subsequently reviewed by Queensland government. The Laura Basin in north Queensland is a priority coal-bearing sedimentary basin that is not currently slated for Bioregional Assessment.

This data release presents regional scale groundwater contours developed for the Upper Burdekin Groundwater Project in North Queensland, conducted as part of Exploring for the Future (EFTF), an Australian Government funded geoscience data and information acquisition program. The four-year (2016-20) program focused on better understanding the potential mineral, energy and groundwater resources in northern Australia. The Upper Burdekin Groundwater Project is a collaborative study between Geoscience Australia and the Queensland Government. It focuses on basalt groundwater resources in two geographically separate areas: the Nulla Basalt Province (NBP) in the south and the McBride Basalt Province (MBP) in the north. This data release includes separate, regional-scale groundwater contour datasets for the Nulla and McBride basalt provinces developed by Geoscience Australia in: Cook, S. B. & Ransley, T. R., 2020. Exploring for the Future—Groundwater level interpretations for the McBride and Nulla basalt provinces: Upper Burdekin region, North Queensland. Geoscience Australia, Canberra, https://pid.geoscience.gov.au/dataset/ga/135439. As detailed in that document, the groundwater contours were drawn by hand based on: - Groundwater levels from monitoring bores measured mostly on 17 February 2019 following extensive rainfall. - Surface topography. - Surface water features (rivers and springs). - Remote sensing data. The inferred groundwater contours were used in various Upper Burdekin Groundwater Project components to frame hydrogeological discussions. It is important to note that they were drawn following a wet period; groundwater contours are temporally variable and those presented in this data release therefore only represent part of the regional groundwater flow system.

In 2017, Queensland Fire and Emergency Services (QFES) completed the State Natural Hazard Risk Assessment which evaluated the risks presented to Queensland by seven in-scope natural hazards. This publication can be found at www.disaster.qld.gov.au. The risks presented by tsunami were not evaluated as part of this assessment as there were State and Commonwealth projects underway at the time that would better inform the understanding of the hazard. These have since been completed and now underpin this guide. Following the release of the State Natural Hazard Risk Assessment and through consultation with stakeholders at all levels of Queensland’s Disaster Management Arrangements, the need for consistent information regarding Queensland’s risk from tsunami impact and inundation was identified. Accordingly, this Tsunami Guide for Queensland was developed, with support from Geoscience Australia and the Department of Environment and Science’s Coastal Impacts Unit (CIU), through a consultative process which also helped contextualise the findings of Geoscience Australia’s Probabilistic Tsunami Hazard Assessment 2018 (PTHA18) for Queensland.

<p>Geoscience Australia (GA) generated a series of gravity and magnetic grids and enhancements covering Northern Australia. Several derivative gravity datasets have been generated 1) for the North-West Shield Western Australia region (approximately between latitudes 7‒26⁰ S and longitudes 110‒130⁰ E), 2) for the Northern Territory (approximately between latitudes 7‒26⁰ S and longitudes 125.5‒141⁰ E) and for Queensland (approximately between latitudes 7‒30⁰ S and longitudes 135‒160⁰ E). The magnetic dataset has been generated only for the North-West Shield Western Australia region (approximately between latitudes 7‒26⁰ S and longitudes 110‒130⁰ E). The magnetic and gravity data were downloaded from the Geophysical Archive Data Delivery System (GADDS), website (http://www.geoscience.gov.au/cgi-bin/mapserv?map=/nas/web/ops/prod/apps/mapserver/gadds/wms_map/gadds.map&mode=browse). Satellite Free-air (FA) gravity v27.1 (released March 11, 2019) and Satellite Topography v19.1 (released January 14, 2019) data were sourced from Sandwell et al. (2014) and downloaded from the Scripps Institution of Oceanography (SIO), National Oceanic and Atmospheric Administration (NOAA), U.S. Navy and National Geospatial-Intelligence Agency (NGA) (SIO Satellite Geodesy, website, http://topex.ucsd.edu/WWW_html/mar_grav.html). The Satellite Bouguer gravity grid with onshore correction density of 2.67 gcm-3 and offshore correction density of 2.20 gcm-3 was derived from the Free-air gravity v27.1 and Topography data V19.1. This Bouguer gravity grid was used for filling areas of data gaps in the offshore region. <p>Data evaluation and processing of gravity and magnetic data available in the area of interest resulted in the production of stitched onshore-offshore Bouguer gravity grid derived from offshore satellite Bouguer gravity grid and GA’s onshore ground and airborne gravity survey data and a stitched Total Magnetic Intensity (TMI) grid derived from airborne and shipborne surveys (Tables 1 and 5). A Reduction to the Pole (RTP) grid was derived from the stitched TMI grid. The TMI, RTP, FA and terrain corrected Bouguer gravity anomalies are standard datasets for geological analysis. The free-air gravity anomaly provides the raw and basic gravity information. Images of free-air gravity are useful for first-pass interpretation and the data is used for gravity modelling. Magnetic anomalies provide information on numerous magnetic sources, including deep sources as arising from the structure and composition of magnetic basement and shallow sources such as intra-sedimentary magnetic units (e.g. volcanics, intrusions, and magnetic sedimentary layers). A standard TMI image will contain information from all these sources. Geosoft Oasis montaj software was used throughout the data processing and enhancement procedure and the montaj GridKnit module was used to generate the stitched gravity and magnetic grids. <p>Enhancement techniques have been applied to the final processed Bouguer gravity and RTP magnetic grids to highlight subtle features from various sources and to separate anomalies from different source depths. These enhancement techniques are described in the next section. <p>Enhancement processing techniques and results <p>A summary of image processing techniques used to achieve various outcomes is described in Table 1. <p>Data type Filter applied Enhancement/outcome <p>Gravity/Magnetic First vertical derivative (1VD) Near surface features (e.g. intrabasinal) <p>Gravity/Magnetic Upward continuation Noise reduction in data <p>Gravity/Magnetic Low pass filter, or large distance upward continuation Enhancement of deep features (e.g. basement) <p>Gravity/Magnetic High pass filter Enhancement of shallow features (e.g. surface anomalies) <p>Gravity/Magnetic Tilt filter and 1VD Enhancement of structure (e.g. in basement) <p>Gravity/Magnetic ZS-Edgezone and ZS-Edge filters Enhancement of edges <p>Gravity/Magnetic horizontal modulus / horizontal gradient Enhancement of boundaries <p>Magnetic RTP (reduction to the pole), Compound Anomaly, and Analytic Signal filter Accurate location of sources

The middle to lower Jurassic sequence in Australia's Surat Basin has been identified as a potential reservoir system for geological CO2 storage. The sequence comprises three major formations with distinctly different mineral compositions, and generally low salinity formation water (TDS<3000 mg/L). Differing geochemical responses between the formations are expected during geological CO2 storage. However, given the prevailing use of saline reservoirs in CCS projects elsewhere, limited data are available on CO2-water-rock dynamics during CO2 storage in such low-salinity formations. Here, a combined batch experiment and numerical modelling approach is used to characterise reaction pathways and to identify geochemical tracers of CO2 migration in the low-salinity Jurassic sandstone units. Reservoir system mineralogy was characterized for 66 core samples from stratigraphic well GSQ Chinchilla 4, and six representative samples were reacted with synthetic formation water and high-purity CO2 for up to 27 days at a range of pressures. Low formation water salinity, temperature, and mineralization yield high solubility trapping capacity (1.18 mol/L at 45°C, 100 bar), while the paucity of divalent cations in groundwater and the silicate reservoir matrix results in very low mineral trapping capacity under storage conditions. Formation water alkalinity buffers pH at elevated CO2 pressures and exerts control on mineral dissolution rates. Non-radiogenic, regional groundwater-like 87Sr/86Sr values (0.7048-0.7066) indicate carbonate and authigenic clay dissolution as the primary reaction pathways regulating solution composition, with limited dissolution of the clastic matrix during the incubations. Several geochemical tracers are mobilised in concentrations greater than found in regional groundwater, most notably cobalt, concentrations of which are significantly elevated regardless of CO2 pressure or sample mineralogy.

This report presents key results from the Upper Burdekin Groundwater Project conducted as part of Exploring for the Future (EFTF)—an eight year Australian Government funded geoscience data and information acquisition program. The first four years of the Program (2016–20) aimed to better understand the potential mineral, energy and groundwater resources in northern Australia. The Upper Burdekin Groundwater Project focused on the McBride Basalt Province (MBP) and Nulla Basalt Province (NBP) in the Upper Burdekin region of North Queensland. It was undertaken as a collaborative study between Geoscience Australia and the Queensland Government. This document reports the key findings of the project, as a synthesis of the hydrogeological investigation project and includes maps and figures to display the results.