<div>The Abbot Point to Hydrographers Passage bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the RV Escape during the period 6 Oct 2020 – 16 Mar 2021. This was a contracted survey conducted for the Australian Hydrographic Office by iXblue Pty Ltd as part of the Hydroscheme Industry Partnership Program. The survey area encompases a section of Two-Way Route from Abbot Point through Hydrographers Passage QLD. Bathymetry data was acquired using a Kongsberg EM 2040, and processed using QPS QINSy. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

This data set provides outlines for the maximum spatial extent of seabed geomorphic units for Australia's Exclusive Economic Zone, including the offshore island territories, but excluding Australian Antarctic Territory. Twenty-one geomorphic feature types were identified and mapped, following definitions published by the International Hydrographic Office (IHO, 2001). <b>Value: </b>The geomorphology of the seabed is used to constrained surface geology of the sea floor, important in resource exploration, marine zone management and for understanding the physical environment <b>Scope: </b>The area covered includes the seafloor within the Australian marine jurisdiction surrounding the Australian mainland and island territories of Christmas, Cocos (Keeling), Macquarie, and Norfolk Islands (Heap & Harris 2008).

This resource contains a bathymetry compilation prepared by the University of Western Australia for the North West Shelf of Australia, between the Cape Range and the Dampier Peninsula. The compilation includes, by decreasing resolution: - Publicly available MBES datasets, made available by Geoscience Australia by December 2019. - Satellite derived bathymetry produced using 1000+ images acquired between January 2017 and December 2019. - Seismic derived bathymetry extracted from 100+ surveys acquired between 1981 and 2015. - SRTM topography, reprocessed by Galant et al, 2011: https://pid.geoscience.gov.au/dataset/ga/72759 - 2009 Australian Bathymetry and Topography grid: https://pid.geoscience.gov.au/dataset/ga/67703 The Seismic and Satellite derived bathymetry grids are also available as individual layers. The vertical and spatial accuracy of the datasets have been thoroughly assessed using high-resolution datasets including publicly available MBES and LADS surveys. The assessment indicates that the seismic derived bathymetry has a depth accuracy better than 1 m + 2% of the absolute water depths while the satellites derived bathymetry has a depth accuracy better than 1 m + 5% of the absolute water depths. A detailed methodology is provided in: Lebrec et al, 2021. Towards a regional high-resolution bathymetry of the North West Shelf of Australia based on Sentinel-2 satellite images, 3D seismic surveys and historical datasets. (in prep.) This dataset is published with the permission of the CEO, Geoscience Australia. AUTHOR’S NOTICE: This dataset should not be used, under any circumstances, for navigation. When used, the dataset should be referenced as follow: Lebrec, U., Paumard, V., O'Leary, M. J., and Lang, S. C.: Towards a regional high-resolution bathymetry of the North West Shelf of Australia based on Sentinel-2 satellite images, 3D seismic surveys and historical datasets, Earth Syst. Sci. Data Discuss. [preprint], https://doi.org/10.5194/essd-2021-128, in review, 2021.

The Wallaby-Zenith Fracture Zone Survey was acquired by the Minderoo-UWA Deep-Sea Research Centre at the University of Western Australia during the expedition “Indomitable” onboard the RV DSSV Pressure Drop from the 8th March to the 2nd June 2021 led by Dr. Alan Jamieson, using a Kongsberg EM124. The expedition was funded by a joint mission between Caladan Oceanic LLC (US) and the Minderoo Foundation (Australia). This dataset contains a 64m-resolution and a 128mm-resolution 32-bit floating point GeoTIFF files of the bathymetry in the study area, derived from the processed EM124 bathymetry data, using QPS Qimera v.2.5 software. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

<div>The Kimberley Region and WA Reefs Bathymetry was derived by EOMAP form multispectral satellite data from the European Space Agency’s Sentinel-2 satellite sensor. EOMAP was contracted by Geoscience Australia (GA) to provide high-resolution (10m) Satellite-Derived Bathymetry (SDB) for the Priority Australian Seabed Mapping Sites. The survey area encompasses an area within Kimberley Region in Western Australia which includes Ashmore Reef, Browse Island, Cartier Island, Clerke Reef, Cunningham Island, Mermaid Reef, Scott Reef and Seringapatam Reef. These critical geospatial data layers provide the essential environmental baseline information for the long-term monitoring and management of these Marine Parks. Mapping the shallow water zone is of importance both from an environmental and socioeconomic perspective. Having access to digital, georeferenced, high-resolution maps of bathymetry and benthic habitats of shallow water areas, is of fundamental use in the areas of navigation, ecological research, environmental modelling, management and conservation, and monitoring the impacts from climate change. Bathymetry data was processed using the physics-based inversion method to derive quantitative information of the shallow water bathymetry using the reflected sunlight energy in different wavelengths of the visible and near infrared region. A detailed delivery report is provided in: Delivery Report: Satellite-Derived Bathymetry, Priority Australian Seabed Mapping Sites. Reference: 20220304.0888. EOMAP Australia Pty Ltd. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.</div>

<div>The Shark Bay Bathymetry was derived form a time series of multispectral satellite data from the Copernicus Sentinel-2 satellite sensor, acquired between January 2017 and December 2020. This dataset was produced by the University of Western Australia to support student research projects. The dataset encompasses the Shark Bay in Western Australia. These critical geospatial data layers provide the essential environmental baseline information for the long-term monitoring and management. Mapping the shallow water zone is of importance both from an environmental and socioeconomic perspective. Bathymetry data was processed following the workflow of Lebrec et al. (2021) [https://doi.org/10.5194/essd-13-5191-2021]. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.</div>

<b>This record was superseded on 5/12/2024 with approval from the Director, National Seabed Mapping as it has been superseded by eCat 150050</b> The AusBathyTopo 250m (Australia) 2023 Grid is a high-resolution depth model for Australia that replaces the Australian Bathymetry and Topography Grid, June 2009. This publication is the result of a collaborative partnership between Geoscience Australia, the Australian Hydrographic Office, James Cook University, and the University of Sydney. It has been compiled using 1582 unique data sources from multibeam echosounders, single-beam echosounders, LiDAR, 3D seismic first returns, Electronic Navigation Charts and satellite derived bathymetry alongside higher-resolution regional compilations. In particular, the map incorporates new innovations such as the use of earth observation data (satellite based) produced by Digital Earth Australia to improve shallow coastal depth modelling to present a seamless transition between land and sea. All source bathymetry data were extensively edited as 3D point clouds to remove noise, given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum. This new continental-scale grid represents decades of data collection, analysis, investment and collaboration from Australia’s seabed mapping community and is a significant improvement on the 2009 compilation. The data extends across a vast area from 92°E to 172° E and 8°S to 60° S. This includes areas adjacent to the Australian continent and Tasmania, and surrounding Macquarie Island and the Australian Territories of Norfolk Island, Christmas Island, and Cocos (Keeling) Islands. Australia's marine jurisdiction offshore from the territory of Heard and McDonald Islands and the Australian Antarctic Territory are not included. We acknowledge the use of the CSIRO Marine National Facility (https://ror.org/01mae9353 ) in undertaking this research. The datasets used were collected by the Marine National Facility on 43 voyages (see Lineage for identification). This dataset is not to be used for navigational purposes.

The Backstairs Passage Bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Ocean Dynasty during the period 12 January - 22 March 2021. This is a contracted survey conducted for the Australian Hydrographic Office by Precision Hydrographic Services as part of the Hydroscheme Industry Partnership Program (HIPP). The survey area encompases Backstairs Passage Southern Australia. Bathymetry data was acquired using a Kongsberg EM2040P and R2 Sonic 2024 systems and processed using QPS Qimera processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area. This dataset is not to be used for navigational purposes.

<div>The Gulf St Vincent North bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Pacific Conquest during the period 27 August – 21 December 2020. This was a contracted survey conducted for the Australian Hydrographic Office by Fugro Australia Marine as part of the Hydroscheme Industry Partnership Program. The survey area encompases an area North of Gulf St Vincent, South Australia. Bathymetry data was acquired using a Kongsberg EM2040 and processed using CARIS HIPS &amp; SIPS processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

The Solitary Islands Gumbaynggirr Yaegl MP bathymetry survey was acquired by the NSW government (Department of Planning and Environment – DPE) onboard the RV Bombora during the period 31 Aug 2022 – 31 Jul 2023, using DPE’s R2Sonic 2022 multibeam sonar. The survey was completed as part of the SeabedNSW program funded by NSW government through Coastal Reforms (>2015), HabMap Program funded through Marine Parks Authority (now under Marine Estate Management Authority) or through collaborations with partner agencies or institutions. The purpose of the project was to 1) provide a baseline dataset and 2) map the spatial distribution of seabed types. This dataset contains 32-bit floating point geotiff files of bathymetry and backscatter in 5m resolution for the study area, derived from the processed Hypack, R2Sonic GUI, POSView, POSPac, Qimera and FMGT software. General details on vessel setup, mobilisation and processing are provided at https://www.environment.nsw.gov.au/-/media/OEH/Corporate-Site/Documents/Research/Our-science-and-research/seabed-nsw-standard-operating-procedures-multibeam-surveying-190101.pdf with survey specific details in the Survey Report and DPIE Rigor Statement (can be provided upon request). This dataset is not to be used for navigational purposes.