The Wilsons Promontory West Glennie and Refuge Cove bathymetry survey was acquired by Deakin University Marine Mapping lab onboard the M/V Yolla on 18 June 2016 using a Kongsberg EM2040c. This survey was part of a Parks Victoria project to assess the impact of the Wilsons Promontory Marine National Park on southern rock lobster populations. These data were collected to provide habitat information in the sampling locations outside the park where no multibeam data existed. The survey was led by Dr. Daniel Ierodiaconou (Deakin University). This dataset contains a 2m-resolution 32-bit floating point GeoTIFF file of the bathymetry in the study area, derived from the processed EM2040C bathymetry data, using CARIS HIPS and SIPS software. A detailed report on the survey is provided in: Young M, Porskamp P, Murfitt S, Wines S, Tinkler P, Bursic, J., Allan B, Howe S, Whitmarsh S, Pocklington J, Ierodiaconou D 2022. Baseline habitat mapping and enhanced monitoring trials of subtidal and intertidal reef habitats in Victoria’s marine national parks and sanctuaries. Parks Victoria Technical Series 116. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

This resource includes bathymetry data acquired during the Keppel Bay 2004 bathymetry survey. Data were collected using a Reson SeaBat 8125 multibeam sonar system by Curtin University of Technology (CUT), Defence Science and Technology Organisation (DSTO) and Geoscience Australia (GA) on the charter vessel Rum Rambler during the period 20th – 26th September 2004. The survey was undertaken as a collaborative project between CUT, DSTO and GA under the Coastal Water Habitat Mapping (CWHM) Project within Coastal Cooperative Research Centre Program. The purpose of the project was to build baseline information for benthic habitats within the study area. This V1 dataset contains a 1m resolution 32-bit floating point geotiff file of the bathmetry of target areas in Keppel Bay, derived from the processed Reson SeaBat 8125 bathymetry data, using CARIS HIPS and SIPS software. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

The Austrea1 bathymetry survey, GA-0222 was acquired by Geoscience Australia onboard the IFREMER N/O L'Atalante from the 17th of December 1999 to the 11th of January 2000 using a Simrad EM12 Dual sonar system. The main objectives of the shipboard program are to collect seabed and sub- bottom data in specific areas off southeast Australia for marine research (geological and biological), assessment of resource potential, regional marine zone planning and management, and to support Australia's claims under UNCLOS and to map the deep water part of a marine protected area in the Great Australian Bight (GAB). This dataset contains a 100m resolution 32-bit geotiff of the Austrea1 survey, produced from the processed EM12D bathymetry data of the survey area using the CARIS HIPS and SIPS software. This dataset is published with the permission of the CEO, Geoscience Australia. Not to be used for navigational purposes.

The Peterborough to Port Fairy bathymetry survey was acquired by Deakin University Marine Mapping lab onboard the M/V Yolla during the period 28 May 2018 - 19 June 2018 using a Kongsberg EM2040C multibeam sonar system. The survey was completed as part of the Victorian Coastal Monitoring Program, which requires bathymetry data to understand offshore sediment dynamics within Victorian coastal waters. This dataset contains a 2m-resolution 32-bit floating point GeoTIFF file of the bathymetry in the study area, derived from the processed EM2040C bathymetry data using CARIS HIPS and SIPS software. This dataset is not to be used for navigational purposes.

This resource includes bathymetry data acquired during the Shellharbour Tharawal marine survey collected by the NSW government (Department of Planning and Environment – DPE) during the period 25 May – 30 November 2017 onboard the RV Bombora using DPE’s R2Sonic 2022 multibeam sonar. The Shellharbour bathymetry survey was led by Dr. Bradley Morris (DPE Coasts and Marine) as part of SeabedNSW program funded by NSW Coastal Reforms package. The purpose of the project was to 1) provide a baseline dataset and 2) map the spatial distribution of seabed types. The data will provide a better understanding of nearshore sediment distribution/transport mechanisms for improved assessment of threats/risks associated with erosion events (i.e. East Coast Lows) and changing sea levels. This dataset contains 2 x 32-bit floating point geotiff files of bathymetry (2m and 5m gridded) for the study area, derived from the processed Hypack, R2Sonic GUI, POSView, POSPac and Qimera software. A detailed report on the survey is provided in: i) AusSeabed Survey Report and ii) NSW DPE Scientific Rigor Statement NSWENV_20171130_Shellharbour_MB_ScientificRigour.pdf. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the Senior Team Leader and the department’s Hydrosurveyor, Coasts and Marine Science, NSW Dept. Planning and Environment.

<p>This is a recent compilation of all the processed multibeam bathymetric data that Geoscience Australia holds in its database for the Bremer and Denmark Sub-Basins. The location of the sub-basin lies in deep water off the southwest margin of WA between Broke and Esperance in Southern Western Australia. <p>This dataset is published with the permission of the CEO, Geoscience Australia. <p>Not to be used for navigational purposes.

This resource includes bathymetry data acquired during the HMAS Canberra bathymetry survey (GA-4880). Data was acquired by Deakin University on the 3rd of November 2020 onboard the M/V Yolla using a Kongsberg EM2040c sonar system. The objective of this survey was to map the HMAS Canberra wreck. The HMAS Canberra wreck is in Bass Strait between Port Lonsdale and Barwon Heads, Victoria, Australia. This dataset contains a 0.5 m resolution 32-bit geotiff of the HMAS Canberra shipwreck survey area produced from the processed EM2040c bathymetry data of the survey area using CARIS HIPS and SIPS software. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

This resource contains multibeam bathymetry data collected as part of the Darwin and Bynoe Harbour Habitat Mapping Project undertaken by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Northern Territory Government (Department of Environment and Natural Resources). The data were acquired during the period from 3 to 27 May 2016 on the RV Solander (survey SOL6432/GA04452). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Environment and Natural Resources, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) project is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. The specific objectives of the survey were to: 1. Obtain high-resolution geophysical (multibeam bathymetry) data for Bynoe Harbour; 2. Characterise seabed substrates (multibeam acoustic backscatter properties, seabed sediment grainsize, sediment chemistry) for Bynoe Harbour; and 3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, seabed still images and video footage of grab sample locations, and oceanographic information including tidal data and water column sound velocity profiles. This V1 dataset contains two 2m resolution 32-bit geotiff of the SOL6432 survey area produced from the processed Kongsberg EM2040C bathymetry data. A detailed account of the survey is provided in: Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas W.A., Picard, K., Radke, L.C., Tran, M., Williams, D. and Whiteway, T. 2016. Bynoe Harbour Marine Survey 2016: GA4452/SOL6432 – Post-survey report. Record 2017/04. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2017.004. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

The Wilsons Promontory bathymetry survey was acquired by Deakin University Marine Mapping lab onboard the M/V Yolla from 9 – 18 April and 27 May to 10 June 2013 using a Kongsberg EM2040c. This survey was part of a Parks Victoria project to better understand the habitats and associated biodiversity of Wilsons Promontory Marine National Park. The survey was led by Dr. Daniel Ierodiaconou (Deakin University). This dataset contains a 2.5m-resolution 32-bit floating point GeoTIFF file of the bathymetry in the study area, derived from the processed EM2040C bathymetry data, using CARIS HIPS and SIPS software. A detailed report on the survey is provided in: Young M, Porskamp P, Murfitt S, Wines S, Tinkler P, Bursic, J., Allan B, Howe S, Whitmarsh S, Pocklington J, Ierodiaconou D 2022. Baseline habitat mapping and enhanced monitoring trials of subtidal and intertidal reef habitats in Victoria’s marine national parks and sanctuaries. Parks Victoria Technical Series 116. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

This resource includes bathymetry data acquired during the Banks Strait bathymetry survey collected by University of Queensland during the period 16 – 28 March 2018 on the TV Bluefin using Bathyswath interferometric sonar system. The survey was undertaken as a project of the Australian Tidal Energy (AUSTEn; http://austen.org.au/) co-funded by the Australian Renewable Energy Agency (ARENA) for the Advancing Renewables Program, led by Prof. Irene Penesis. The purpose of the project was to map the country’s tidal energy resource in unprecedented detail and assess its economic feasibility and ability to contribute to Australia’s energy needs. It will aid the emerging tidal energy industry to develop commercial-scale tidal energy projects. This dataset contains a 4m resolution 32-bit floating point geotiff file of the bathymetry in study area and transits, derived from the processed Bathyswath interferometric data, using Fledermaus. A final report of the project is provided in: Penesis, I et al. 2020. Tidal Energy in Australia: Assessing Resource and Feasibility in Australia’s Future Energy Mix (https://tethys-engineering.pnnl.gov/sites/default/files/publications/tidal-energy-in-australia-2020.pdf). This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.