<div>The Gas Chromatography-Mass Spectrometry (GC-MS) biomarker database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) schema and supporting oracle databases for the molecular (biomarker) compositions of source rock extracts and petroleum liquids (e.g., condensate, crude oil, bitumen) sampled from boreholes and field sites. These analyses are undertaken by various laboratories in service and exploration companies, Australian government institutions and universities using either gas chromatography-mass spectrometry (GC-MS) or gas chromatography-mass spectrometry-mass spectrometry (GC-MS-MS). Data includes the borehole or field site location, sample depth, shows and tests, stratigraphy, analytical methods, other relevant metadata, and the molecular composition of aliphatic hydrocarbons, aromatic hydrocarbons and heterocyclic compounds, which contain either nitrogen, oxygen or sulfur.</div><div><br></div><div>These data provide information about the molecular composition of the source rock and its generated petroleum, enabling the determination of the type of organic matter and depositional environment of the source rock and its thermal maturity. Interpretation of these data enable the determination of oil-source and oil-oil correlations, migration pathways, and any secondary alteration of the generated fluids. This information is useful for mapping total petroleum systems, and the assessment of sediment-hosted resources. Some data are generated in Geoscience Australia’s laboratory and released in Geoscience Australia records. Data are also collated from destructive analysis reports (DARs), well completion reports (WCRs), and literature. The biomarker data for crude oils and source rocks are delivered in the Petroleum and Rock Composition – Biomarker web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div>

<div>The bulk source rock database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) schema and supporting oracle databases for the bulk properties of sedimentary rocks that contain organic matter and fluid inclusions taken from boreholes and field sites. The analyses are performed by various laboratories in service and exploration companies, Australian government institutions, and universities, using a range of instruments. Sedimentary rocks that contain organic matter are typically referred to as source rocks (e.g., organic-rich shale, oil shale and coal) and the organic matter within the rock matrix that is insoluble in organic solvents is named kerogen. Data includes the borehole or field site location, sample depth, stratigraphy, analytical methods, other relevant metadata, and various data types including; elemental composition, and the stable isotopes of carbon, hydrogen, nitrogen, and sulfur. Results are also included from methods that separate the extractable organic matter (EOM) from rocks into bulk components, such as the quantification of saturated hydrocarbon, aromatic hydrocarbon, resin and asphaltene (SARA) fractions according to their polarity. The stable carbon (¹³C/¹²C) and hydrogen (²H/¹H) isotopic ratios of the EOM and derivative hydrocarbon fractions, as well as fluid inclusion oils, are presented in delta notation (i.e., &delta;¹³C and &delta;²H) in parts per mil (‰) relative to the Vienna Peedee Belemnite (VPDB) standard.</div><div><br></div><div>These data are used to determine the molecular and isotopic compositions of organic matter within rocks and associated fluid inclusions and evaluate the potential for hydrocarbon generation in a basin. Some data are generated in Geoscience Australia’s laboratory and released in Geoscience Australia records. Data are also collated from destructive analysis reports (DARs), well completion reports (WCRs), and literature. The bulk data for sedimentary rocks are delivered in the Source Rock Bulk Properties and Stable Isotopes web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div>

<div>The bulk rock stable isotopes database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) schema and supporting oracle databases for the stable isotopic composition of sedimentary rocks with an emphasis on calcareous rocks and minerals sampled from boreholes and field sites. The stable isotopes of carbon, oxygen, strontium, hydrogen, nitrogen, and sulfur are measured by various laboratories in service and exploration companies, Australian government institutions, and universities, using a range of instruments. Data includes the borehole or field site location, sample depth, stratigraphy, analytical methods, other relevant metadata, and the stable isotopes ratios. The carbon (¹³C/¹²C) and oxygen (¹⁸O/¹⁶O) isotope ratios of calcareous rocks are expressed in delta notation (i.e., &delta;¹³C and &delta;¹⁸O) in parts per mil (‰) relative to the Vienna Peedee Belemnite (VPDB) standard, with the &delta;¹⁸O values also reported relative to the Vienna Standard Mean Ocean Water (VSMOW) standard. Likewise, the stable isotope ratio of hydrogen (²H/¹H) is presented in delta notation (&delta;²H) in parts per mil (‰) relative to the VSMOW standard, the stable isotope ratio of nitrogen (¹⁵N/¹⁴N) is presented in delta notation (&delta;¹⁵N) in parts per mil (‰) relative to the atmospheric air (AIR) standard, and the stable isotope ratio of sulfur (³⁴S/³²S) is presented in delta notation (&delta;³⁴S) relative to the Vienna Canyon Diablo Troilite (VCDT) standard. For carbonates, the strontium (⁸⁷Sr/⁸⁶Sr) isotope ratios are also provided.</div><div><br></div><div>These data are used to determine the isotopic compositions of sedimentary rock with emphasis on the carbonate within rocks, either as minerals, the mineral matrix or cements. The results for the carbonate rocks are used to determine paleotemperature, paleoenvironment and paleoclimate, and establish regional- and global-scale stratigraphic correlations. These data are collated from Geoscience Australia records, destructive analysis reports (DARs), well completion reports (WCRs), and literature. The stable isotope data for sedimentary rocks are delivered in the Stable Isotopes of Carbonates web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div>

<div>The fluid inclusion stratigraphy database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) schema and supporting oracle databases for Fluid Inclusion Stratigraphy (FIS) analyses performed by FIT, a Schlumberger Company (and predecessors), on fluid inclusions in rock samples taken from boreholes. Data includes the borehole location, sample depth, stratigraphy, analytical methods and other relevant metadata, as well as the mass spectrometry results presented as atomic mass units (amu) from 2 to 180 in parts per million (ppm) electron volts.</div><div> Fluid inclusions (FI) are microscopic samples of fluids trapped within minerals in the rock matrix and cementation phases. Hence, these FIS data record the bulk volatile chemistry of the fluid inclusions (i.e., water, gas, and/or oil) present in the rock sample and determine the relative abundance of the trapped compounds (e.g., in amu order, hydrogen, helium, methane, ethane, carbon dioxide, higher molecular weight aliphatic and aromatic hydrocarbons, and heterocyclic compounds containing nitrogen, oxygen or sulfur). The FI composition can be used to identify the presence of organic- (i.e., biogenic or thermogenic) and inorganic-sourced gases. These data provide information about fluid preservation, migration pathways and are used to evaluate the potential for hydrocarbon (i.e. dry gas, wet gas, oil) and non-hydrocarbon (e.g., hydrogen, helium) resources in a basin. These data are collated from Geoscience Australia records, destructive analysis reports (DARs) and well completion reports (WCRs), with the results being delivered in the Fluid Inclusion Stratigraphy (FIS) web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div>

<div>The Carpentaria Basin is a Mesozoic basin located in the northernmost part of Australia and is centered around the Gulf of Carpentaria . It forms part of the Great Australian Superbasin that includes the Eromanga, Surat, Nambour and Clarence-Morton basins to the south, the Laura Basin, to the east, and the Papuan Basin to the north. In a west-east direction it extends for about 1250 km from the area of Katherine in the Northern Territory to the Great Dividing Range in Queensland. A small portion of the basin reaches the east coast of Queensland in the Olive River region. In a north-south direction it extends for over 1000 km from Cape York to Cloncurry, in Queensland. The basin has a total area of over 750,000 km2, comparable in size to the state of New South Wales. From a geographic standpoint the sediments of the Carpentaria Basin occur in three areas: offshore below the Gulf of Carpentaria, onshore to the west in the Northern Territory, and onshore to the east in Queensland. This report focuses on the geology and energy resource potential of the onshore areas of the basin but, to provide a broader understanding of the basin evolution there is, of necessity, some discussion of the geology offshore.</div><div><br></div>

<div>The bulk oils database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) schema and supporting oracle databases for the bulk properties of petroleum liquids (e.g., condensate, crude oil, bitumen) sampled from boreholes and field sites. The analyses are performed by various laboratories in service and exploration companies, Australian government institutions, and universities using a range of instruments. Petroleum is composed primarily of hydrocarbons (carbon and hydrogen) with minor quantities of heterocyclic compounds containing either nitrogen, oxygen or sulfur. Data includes the borehole or field site location, sample depth, shows and tests, stratigraphy, analytical methods, other relevant metadata, and various data types including; API gravity, elemental composition and photographs of the samples. The stable carbon (¹³C/¹²C) and hydrogen (²H/¹H) isotopic ratios of crude oil and derivative saturated and aromatic hydrocarbon fractions are presented in parts per mil (‰) and in delta notation as &delta;¹³C and &delta;²H, respectively. Results are also included from methods that separate crude oils into bulk components, such as the quantification of saturated hydrocarbon, aromatic hydrocarbon, resin, and asphaltene (SARA) fractions according to their polarity.</div><div><br></div><div>These data provide information about the petroleum fluid’s composition, source, thermal maturity, secondary alteration, and fluid migration pathways. They are also useful for enhanced oil recovery assessments, petroleum systems mapping and basin modelling. Hence, these sample-based datasets are used for the discovery and evaluation of sediment-hosted resources. Some data are generated in Geoscience Australia’s laboratory and released in Geoscience Australia records. Data are also collated from destructive analysis reports (DARs), well completion reports (WCRs), and literature. The bulk oils data are delivered in the Petroleum Bulk Properties and Stable Isotopes web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div>

<div>Lateral variation in maturity of potential Devonian source rocks in the Adavale Basin has been investigated using nine 1D burial, thermal and petroleum generation history models, constructed using existing open file data. These models provide an estimate of the hydrocarbon generation potential of the basin. Total organic carbon (TOC) content and pyrolysis data indicate that the Log Creek Formation, Bury Limestone and shale units of the Buckabie Formation have the most potential as source rocks. The Log Creek Formation and the Bury Limestone are the most likely targets for unconventional gas exploration.</div><div>The models were constructed using geological information from well completion reports to assign formation tops and stratigraphic ages, and then forward model the evolution of geophysical parameters. The rock parameters, including facies, temperature, organic geochemistry and petrology, were used to investigate source rock quality, maturity and kerogen type. Suitable boundary conditions were assigned for paleo-heat flow, paleo-surface temperature and paleo-water depth. The resulting models were calibrated using bottom hole temperature and measured vitrinite reflectance data.</div><div>The results correspond well with published heat flow predictions, although a few wells show possible localised heat effects that differ from the basin average. The models indicate that three major burial events contribute to the maturation of the Devonian source rocks, the first occurring from the Late Devonian to early Carboniferous during maximum deposition of the Adavale Basin, the second in the Late Triassic during maximum deposition of the Galilee Basin, and the third in the Late Cretaceous during maximum deposition of the Eromanga Basin. Generation in the southeastern area appears to have not been effected by the second and third burial events, with hydrocarbon generation only modelled during the Late Devonian to early Carboniferous event. This suggests that Galilee Basin deposition was not significant or was absent in this area. Any potential hydrocarbon accumulations could be trapped in Devonian sandstone, limestone and mudstone units, as well as overlying younger sediments of the Mesozoic Eromanga Basin. Migration of the expelled hydrocarbons may be restricted by overlying regional seals, such as the Wallumbilla Formation of the Eromanga Basin. Unconventional hydrocarbons are a likely target for exploration in the Adavale Basin, with potential for tight or shale gas from the Log Creek Formation and Bury Limestone in favourable areas.</div>

<div>The pyrolysis-gas chromatography database table contains publicly available results from Geoscience Australia's organic geochemistry (ORGCHEM) database and supporting oracle databases for open system pyrolysis-gas chromatography (pyrolysis-GC) analyses performed on either source rocks or kerogen samples taken from boreholes and field sites. Sedimentary rocks that contain organic matter are referred to as source rocks (e.g., organic-rich shale, oil shale and coal) and the organic matter within the rock matrix that is insoluble in organic solvents is named kerogen. The analyses are undertaken by various laboratories in service and exploration companies using a range of instruments. Data includes the borehole or field site location, sample depth, stratigraphy, analytical methods, other relevant metadata, and the molecular composition of the pyrolysates. The concentrations of the aliphatic hydrocarbon, aromatic hydrocarbon and organic sulfur compounds are given in several units of measure [e.g., percent (resolved compounds) in the S2 peak (wt% S2), milligrams per gram of rock (mg/g rock), micrograms per gram of kerogen (mg/g kerogen) etc.].</div><div><br></div><div>These data are used to determine the organic richness, kerogen type and thermal maturity of source rocks in sedimentary basins. The results are used as input parameters in basin analysis and petroleum systems modelling to evaluate the potential for hydrocarbon generation in a sedimentary basin. These data are collated from destructive analysis reports (DARs), well completion reports (WCRs) and literature. The data are delivered in the Source Rock Pyrolysis-Gas Chromatography web services on the Geoscience Australia Data Discovery Portal at https://portal.ga.gov.au which will be periodically updated.</div><div><br></div>

<b>Organic Geochemistry (ORGCHEM) Schema. Australian Source Rock and Fluid Atlas</b> The databases tables held within Geoscience Australia's Oracle Organic Geochemistry (ORGCHEM) Schema, together with other supporting Oracle databases (e.g., Borehole database (BOREHOLE), Australian Stratigraphic Units Database (ASUD), and the Reservoir, Facies and Shows (RESFACS) database), underpin the Australian Source Rock and Fluid Atlas web services and publications. These products provide information in an Australia-wide geological context on organic geochemistry, organic petrology and stable isotope data related primarily to sedimentary rocks and energy (petroleum and hydrogen) sample-based datasets used for the discovery and evaluation of sediment-hosted resources. The sample data provide the spatial distribution of source rocks and their derived petroleum fluids (natural gas and crude oil) taken from boreholes and field sites in onshore and offshore Australian provinces. Sample depth, stratigraphy, analytical methods, and other relevant metadata are also supplied with the analytical results. Sedimentary rocks that contain organic matter are referred to as source rocks (e.g., organic-rich shale, oil shale and coal) and the organic matter within the rock matrix that is insoluble in organic solvents is named kerogen. The data in the ORGCHEM schema are produced by a wide range of destructive analytical techniques conducted on samples submitted by industry under legislative requirements, as well as on samples collected by research projects undertaken by Geoscience Australia, state and territory geological organisations and scientific institutions including the Commonwealth Scientific and Industrial Research Organisation (CSIRO) and universities. Data entered into the database tables are commonly sourced from both the basic and interpretive volumes of well completion reports (WCR) provided by the petroleum well operator to either the state and territory governments or, for offshore wells, to the Commonwealth Government under the Offshore Petroleum and Greenhouse Gas Storage Act (OPGGSA) 2006 and previous Petroleum (submerged Lands) Act (PSLA) 1967. Data are also sourced from analyses conducted by Geoscience Australia’s laboratory and its predecessor organisations, the Australian Geological Survey Organisation (AGSO) and the Bureau of Mineral Resources (BMR). Other open file data from company announcements and reports, scientific publications and university theses are captured. The ORGCHEM database was created in 1990 by the BMR in response to industry requests for organic geochemistry data, featuring pyrolysis, vitrinite reflectance and carbon isotopic data (Boreham, 1990). Funding from the Australian Petroleum Cooperative Research Centre (1991–2003) enabled the organic geochemical data to be made publicly available at no cost via the petroleum wells web page from 2002 and included BOREHOLE, ORGCHEM and the Reservoir, Facies and Shows (RESFACS) databases. Investment by the Australian Government in Geoscience Australia’s Exploring for the Future (EFTF) program facilitated technological upgrades and established the current web services (Edwards et al., 2020). The extensive scope of the ORGCHEM schema has led to the development of numerous database tables and web services tailored to visualise the various datasets related to sedimentary rocks, in particular source rocks, crude oils and natural gases within the petroleum systems framework. These web services offer pathways to access the wealth of information contained within the ORGCHEM schema. Web services that facilitate the characterisation of source rocks (and kerogen) comprise data generated from programmed pyrolysis (e.g., Hawk, Rock-Eval, Source Rock Analyser), pyrolysis-gas chromatography (Py-GC) and kinetics analyses, and organic petrological studies (e.g., quantitation of maceral groups and organoclasts, vitrinite reflectance measurements) using reflected light microscopy. Collectively, these data are used to establish the occurrence of source rocks and the post-burial thermal history of sedimentary basins to evaluate the potential for hydrocarbon generation. Other web services provide data to characterise source rock extracts (i.e., solvent extracted organic matter), fluid inclusions and petroleum (e.g., natural gas, crude oil, bitumen) through the reporting of their bulk properties (e.g., API gravity, elemental composition) and molecular composition using gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). Also reported are the stable isotope ratios of carbon, hydrogen, nitrogen, oxygen and sulfur using gas chromatography-isotope ratio mass spectrometry (GC-IRMS) and noble gas isotope abundances using ultimate high-resolution variable multicollection mass spectrometry. The stable isotopes of carbon, oxygen and strontium are also reported for sedimentary rocks containing carbonate either within the mineral matrix or in cements. Interpretation of these data enables the characterisation of petroleum source rocks and identification of their derived petroleum fluids, which comprise two key elements of petroleum systems analysis. Understanding a fluid’s physical properties and molecular composition are prerequisites for field development. The composition of petroleum determines its economic value and hence why the concentration of hydrocarbons (methane, wet gases, light and heavy oil) and hydrogen, helium and argon are important relative to those of nitrogen, carbon dioxide and hydrogen sulfide for gases, and heterocyclic compounds (nitrogen, oxygen or sulfur) found in the asphaltene, resin and polar fractions of crude oils. The web services and tools in the Geoscience Australia Data Discovery Portal (https://portal.ga.gov.au/), and specifically in the Source Rock and Fluid Atlas Persona (https://portal.ga.gov.au/persona/sra), allow the users to search, filter and select data based on various criteria, such as basin, formation, sample type, analysis type, and specific geochemical parameters. The web map services (WMS) and web feature services (WFS) enable the user to download data in a variety of formats (csv, Json, kml and shape file). The Source Rock and Fluid Atlas supports national resource assessments. The focus of the atlas is on the exploration and development of energy resources (i.e., petroleum and hydrogen) and the evaluation of resource commodities (i.e., helium and graphite). Some data held in the ORGCHEM tables are used for enhanced oil recovery and carbon capture, storage and utilisation projects. The objective of the atlas is to empower people to deliver Earth science excellence through data and digital capability. It benefits users who are interested in the exploration and development of Australia's energy resources by: • Providing a comprehensive and reliable source of information on the organic geochemistry of Australian source rocks • Enhancing the understanding of the spatial distribution, quality, and maturity of petroleum source rocks. • Facilitating the mapping of total petroleum and hydrogen systems and the assessment of the petroleum and hydrogen resource potential and prospectivity of Australian basins. • Facilitating the mapping of gases (e.g., methane, helium, carbon dioxide) within the geosphere as part of the transition to clean energy. • Enabling the integration and comparison of data from diverse sources and various acquisition methods, such as geological, geochemical, geophysical and geospatial data. • Providing data for integration into enhanced oil recovery and carbon capture, storage and utilisation projects. • Improving the accessibility and usability of data through user-friendly and interactive web-based interfaces. • Promoting the dissemination and sharing of data among Government, industry and community stakeholders. <b>References</b> Australian Petroleum Cooperative Research Centre (APCRC) 1991-2003. Australian Petroleum CRC (1991 - 2003), viewed 6 May 2024, https://www.eoas.info/bib/ASBS00862.htm and https://www.eoas.info/biogs/A001918b.htm#pub-resources Boreham, C. 1990. ORGCHEM Organic geochemical database. BMR Research Newsletter 13. Record 13:10-10. Geoscience Australia, Canberra. https://pid.geoscience.gov.au/dataset/ga/90326 Edwards, D.S., MacFarlane, S., Grosjean, E., Buckler, T., Boreham, C.J., Henson, P., Cherukoori, R., Tracey-Patte, T., van der Wielen, S.E., Ray, J., Raymond, O. 2020. Australian source rocks, fluids and petroleum systems – a new integrated geoscience data discovery portal for maximising data potential. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/133751. <b>Citation</b> Edwards, D., Buckler, T. 2024. Organic Geochemistry (ORGCHEM) Schema. Australian Source Rock and Fluid Atlas. Geoscience Australia, Canberra. https://pid.geoscience.gov.au/dataset/ga/149422

<div>The onshore Canning Basin in Western Australia was the focus of a regional hydrocarbon prospectivity assessment undertaken by the Exploring for the Future&nbsp;(EFTF) program dedicated to increasing investment in resource exploration in northern Australia, with the objective being to acquire new data and information about the potential mineral, energy and groundwater resources concealed beneath the surface. Significant work has been carried out to deliver new pre-competitive data in the region including new seismic acquisition, drilling of a stratigraphic well, and geochemical analysis from historic exploration wells.</div><div><br></div><div>As part of this program, determination of the molecular and noble gas isotopic composition of natural gases from selected petroleum wells in the Canning Basin were undertaken by Smart Gas Sciences, under contract to Geoscience Australia, with results from these analyses being released in this report. This report provides additional data to determine the sources of natural gases in the Canning Basin and build on the availability of existing gas data, gas-gas correlations and gas-oil correlations. Noble gas isotopic data can be used in conjunction with carbon and hydrogen isotopic data to determine the origin of both inorganic and organic (hydrocarbon) gases. This information can be used in future geological programs to determine the source and distribution of hydrogen and helium in natural gases and support exploration programs.</div>