<div>Magmatic arcs represent a critical source of modern civilisation’s mineral wealth, with their importance only enhanced by the ongoing global transition to a low-carbon society. The ~830-495 Ma Delamerian Orogen, formed at Australia’s eastern cratonic margin, represents rocks ascribed to rift/passive-margin, convergent margin arc, orogenic, and post-orogenic settings. However, poor exposure has limited exploration activity across much of the orogen, despite demonstrated potential for numerous mineral systems. To address this issue, an orogen-wide zircon Hf-O isotope and trace element survey was performed on 55 magmatic samples to constrain the crustal architecture, evolution, and fertility of the Delamerian Orogen, and in turn map parameters that can be used as a guide to mineral potential. These new data define two broad magmatic episodes at: (1) ~585-480 Ma, related to rift/passive margin, convergent arc, orogenic, and post-orogenic activity (Delamerian Cycle); and (2) magmatism associated with the ~490-320 Ma Lachlan Orogen, with peaks at ~420 Ma (onshore, Tabberabberan Cycle) and ~370 Ma (western Tasmania). Isotopic and geochemical mapping of these events show that the ~585-480 Ma Delamerian Cycle has significant orogen-wide variation in magmatic Hf-O isotopes and oxidation-state, suggesting a spatial variation in the occurrence and type of potential mineral systems. The ~420 Ma magmatic event involved predominantly mantle-like Hf-O and oxidised magmatism, whilst the ~370 Ma magmatism shows opposing features. In general, The potential to host Cu-Au porphyry and VMS mineralisation (e.g., Stavely, Koonenberry) is present, but restricted, whereas signatures favourable for Sn-W granite-hosted systems (e.g., Tasmania), are more common. These new data constrain time-space variations in magma composition that provide a valuable geological framework for mineral system fertility assessments across the Delamerian Orogen. Furthermore, these data and associated maps can used to assess time-space mineral potential and facilitate more effective exploration targeting in this covered region.</div> <b>Citation:</b> Mole, D., Bodorkos, S., Gilmore, P.J., Fraser, G., Jagodzinski, E.A., Cheng, Y., Clark, A.D., Doublier, M., Waltenberg, K., Stern, R.A., Evans, N.J., 2023. Architecture, evolution and fertility of the Delamerian Orogen: Insights from zircon. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, <a href+"https://dx.doi.org/10.26186/148981">https://dx.doi.org/10.26186/148981</a>

<div>This study is part of the Mineral Potential Assessment (MPA) module of Geoscience Australia's Darling-Curnamona-Delamerian (DCD) project, a deep-dive project within the Exploring for the Future Program (EFTF) 2020-2024. An objective of the DCD project is to further the understanding of the geological architecture of the Delamerian Orogen into a cohesive framework enable a regional mineral potential assessment of this under-explored and mostly under cover Orogen. The MPA module is one of eight modules under the umbrella of the DCD project. To facilitate assessment of the mineral potential of the project area, the mineral potential assessment study has 3 key scientific objectives: (1) Defining the characteristics of the mineral systems / prospects. (2)&nbsp;&nbsp;Evaluating the temporal framework of the formation of mineral systems / prospects; and (3) Understanding the regional magma fertility. This study delivers Objective 1, i.e., outlining the principle geological and metallogenic characteristics of reported mineral prospects in the project area.&nbsp;</div><div><br></div><div>Legacy drill cores best demonstrating metallogenic features of different mineral system types at key prospects across the project area were selected for viewing and sampling following review of historical exploration reports and assay results. Four sets of data are included in the appendices of this report: (1)&nbsp;&nbsp;HyLogger spectral images of 20 drill holes of 8 prospects in New South Wales. (2)&nbsp;&nbsp;143 high-resolution scan files of legacy drill core samples across the project area. (3)&nbsp;&nbsp;16 microscopic images of thin sections for 4 prospects of the Loch Lilly-Kars Belt, New South Wales. (4)&nbsp;&nbsp;53 Backscattered Electron (BSE) images and 53 Advanced Mineral Identification and Characterization System (AMICS) high-resolution mineral maps of 53 samples from 18 prospects across the whole Delamerian Margin.&nbsp;</div><div><br></div><div>Metallogenic characteristics of samples from four different mineral deposit types were studied, along deposits of uncertain affiliation (referred here as undefined systems), including (1) Porphyry-epithermal mineral systems. (2)&nbsp;&nbsp;Volcanic hosted massive sulfide (VHMS) mineral systems. (3)&nbsp;&nbsp;Orogenic gold mineral systems. (4)&nbsp;&nbsp;Mafic-ultramafic Cu-Ni-PGE mineral systems. (5)&nbsp;&nbsp;Metallogenetically undefined systems. Detailed metallogenic characteristics of the samples from 22 key prospects in Delamerian Orogen are documented in this report.&nbsp;&nbsp;</div><div><br></div><div>This is the first systemic study on the essential metallogenic characteristics of the mineral systems in Delamerian. The characterisations outlined in this report are foundational for understanding the regional metallogenesis and assessing the potential of multiple types of mineral systems in the Delamerian Belt, which should be useful in both academic and the mineral exploration sector.</div><div><br></div><div>The high-resolution BSE and AMICS mineral maps are available at Geoscience Australia. Please reach out to the senior author of this GA Record, Dr. Yanbo Cheng (Yanbo.cheng@ga.gov.au). </div>

Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government. This Record presents new U-Pb zircon geochronology from the Loch-Lilly Kars and Lake Wintlow (as described by Clark et al. 2024) Belts of the central Delamerian Orogen (Foden et al., 2020; Gilmore et al., 2023; Mole et al., 2023), performed on Geoscience Australia’s (GA) sensitive high-resolution ion microprobe (SHRIMP). The eight samples presented here (three sedimentary and five igneous rocks; Table i) were collected during Geoscience Australia’s drilling campaign across the region, which consisted of 17 drill-holes (Pitt et al., 2023), using two drilling techniques (coiled-tube rotary and conventional diamond). This work was performed as part of the MinEx CRC National Drilling initiative (NDI) and Geoscience Australia’s Darling-Curnamona-Delamerian project of the Exploring for the Future program (EFTF; <a href="https://www.eftf.ga.gov.au/">https://www.eftf.ga.gov.au/</a>). The primary aims of this drilling were to (1) understand and constrain the geology of the southern Loch-Lilly Kars Belt; and (2) assess whether Cambrian magmatic rocks continued to the south-west in the Lake Wintlow Belt, marking a possible continuation of the Stavely Belt volcanic arc rocks observed in western Victoria (Bowman et al., 2019; Lewis et al., 2016; Lewis et al., 2015; Schofield, 2018; Figure i). As both these regions are covered, this new drilling and the geochronology they allow provide the first constraints on the age of these rock units. In addition, due to the lack of surface correlation and detailed geological mapping, these units currently have no officially-defined stratigraphic nomenclature and remain unnamed. For detailed information on all drill-holes completed as part of the survey, we direct readers to the summary report by Pitt et al. (2023): <a href="https://ecat.ga.gov.au/geonetwork/srv/eng/catalog.search#/metadata/148639">eCat 148639</a>.

<div><strong>Output Type:</strong> Exploring for the Future Extended Abstract</div><div><br></div><div><strong>Short Abstract: </strong>An advanced understanding of regional-scale metallogenic characteristics and ore-formation controls is fundamental for mineral discovery, particularly in underexplored covered terranes, such as the Delamerian Orogen of southeastern Australia. The Delamerian Orogen is defined as the spatial extent of rocks first deformed by the Delamerian Orogeny, though the Orogen was also affected by younger geodynamic events. Petrology of the mineralised host rocks from over 20 mineral prospects and deposits has led to the recognition of four types of mineral systems related to the geodynamic history of the Delamerian Orogen on mainland Australia, including (1) porphyry-epithermal; (2) volcanic-hosted massive sulphide (VHMS); (3) orogenic gold; and (4) mafic-ultramafic magmatic Cu-Ni-PGE systems. Several other prospects are yet to be classified due to insufficient data, although there is strong evidence to suggest that these are magmatic-hydrothermal in origin. Direct dating of hydrothermal alteration and mineralisation at key mineral deposits and prospects (using U-Pb in titanite and apatite, and Sm-Nd in fluorite) identified four major metallogenic events in the Delamerian Orogen margin. The middle to late Cambrian (505–494 Ma) mineral systems, throughout the eastern margin of the Delamerian Orogen, are potentially the most significant. However, our new dating indicates other metallogenic events at 590–580 Ma, 480–460 Ma, and 412–399 Ma. Analysis of data related to mineral systems fertility reveals crustal controls on the location and type of mineralisation in the Delamerian Orogen. Integration of Hf and O isotopes in zircon, and S isotopes in sulphide minerals indicates that the geology of the Orogen may host multiple opportunities for mineral system development. An indicative map of ca.600–400 Ma mineral system potential was developed by integrating this new data, together with other geological, geochemical and geophysical datasets within the geodynamic context of the Delamerian Orogen. Importantly, this study demonstrates the metallogenic characteristics of multiple types and episodes of mineral system development, and the geological processes that have controlled their formation to aid exploration.</div><div><br></div><div><strong>Citation: </strong>Cheng, Y., Gilmore, P., Lewis, C., Roach, I., Clark, A., Mole, D., Pitt, L., Doublier, M., Sanchez, G., Schofield, A., O'Rourke, A., Budd, A., Huston, D., Czarnota, K., Meffre, S., Feig, S., Maas, R., Gilbert, S., Cairns, C., Cayley, R., Wise, T., Wade, C., Werner, M., Folkes, C. &amp; Hughes, K., 2024. Mineral systems and metallogeny of the Delamerian Orogen margin. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts. Geoscience Australia, Canberra. https://doi.org/10.26186/149657</div><div><br></div>

<div>This data package contains interpretations of airborne electromagnetic (AEM) conductivity sections in the Exploring for the Future (EFTF) program’s Eastern Resources Corridor (ERC) study area, in south eastern Australia. Conductivity sections from 3 AEM surveys were interpreted to provide a continuous interpretation across the study area – the EFTF AusAEM ERC (Ley-Cooper, 2021), the Frome Embayment TEMPEST (Costelloe et al., 2012) and the MinEx CRC Mundi (Brodie, 2021) AEM surveys. Selected lines from the Frome Embayment TEMPEST and MinEx CRC Mundi surveys were chosen for interpretation to align with the 20&nbsp;km line-spaced EFTF AusAEM ERC survey (Figure 1).</div><div>The aim of this study was to interpret the AEM conductivity sections to develop a regional understanding of the near-surface stratigraphy and structural architecture. To ensure that the interpretations took into account the local geological features, the AEM conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This approach provides a near-surface fundamental regional geological framework to support more detailed investigations. </div><div>This study interpreted between the ground surface and 500&nbsp;m depth along almost 30,000 line kilometres of nominally 20&nbsp;km line-spaced AEM conductivity sections, across an area of approximately 550,000&nbsp;km2. These interpretations delineate the geo-electrical features that correspond to major chronostratigraphic boundaries, and capture detailed stratigraphic information associated with these boundaries. These interpretations produced approximately 170,000 depth estimate points or approximately 9,100 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for compliance with Geoscience Australia’s (GA) Estimates of Geological and Geophysical Surfaces (EGGS) database, the national repository for standardised depth estimate points. </div><div>Results from these interpretations provided support to stratigraphic drillhole targeting, as part of the Delamerian Margins NSW National Drilling Initiative campaign, a collaboration between GA’s EFTF program, the MinEx CRC National Drilling Initiative and the Geological Survey of New South Wales. The interpretations have applications in a wide range of disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. It is anticipated that these interpretations will benefit government, industry and academia with interest in the geology of the ERC region.</div>

<div>A multi-disciplinary program of geological and geophysical data collection and integration, focussed on the Delamerian Orogen, was undertaken as part of Geoscience Australia’s Exploring for the Future (EFTF) program and the Mineral Exploration Cooperative Research Centres (MinEx CRC) National Drilling Initiative (NDI).&nbsp;In this study, we integrate learnings from these data with existing geological and geophysical data to refine the basement geology of the Loch Lilly-Kars Belt, Lake Wintlow Belt and Wilcannia High. Our interpretation provides a revised geological framework for a frontier exploration region in the Delamerian Orogen.&nbsp;This product includes ESRI shape files and layer files, accompanying notes, and several appendices containing new detrital zircon U-Pb geochronology data from the map area as well as the broader Delamerian Orogen.</div>