Carbon Capture and Storage (CCS) is a technique for mitigating anthropogenic climate change by separating CO2 from industrial flue gas, transporting it to and storing it in a subsurface geological storage reservoir. The low-salinity (TDS<3 000 mg/L) Jurassic sandstone formations in Australia's Surat Basin have been identified as a potential reservoir system for geological CO2 sequestration. However, given the prevailing use of saline reservoirs in CCS projects elsewhere, limited data are available on CO2-water-rock dynamics during geological sequestration in such low-salinity formations. Here, a combined batch experiment and numerical modelling approach is used to characterise potential CO2-water-rock reaction pathways, to assess potential impacts of CCS on groundwater chemistry, and to identify geochemical tracers of inter- and intra-formational CO2 migration during geological sequestration within the Jurassic sandstones. Mineralogy and physical properties of the prospective reservoir are characterized for 66 core samples from stratigraphic well GSQ Chinchilla 4. Representative samples are reacted with synthetic formation water and high-purity CO2 for up to 27 days at a range of pressures to simulate conditions during carbon sequestration in the Jurassic sandstones. Results show the low formation water salinity, temperature, and mineralization in the reservoirs yield high solubility trapping capacity (1.18 mol/L at 45°C, 100 bar), while the paucity of divalent cations in groundwater and the silicate reservoir matrix result in very low mineral trapping capacity within the footprint of the supercritical CO2 (scCO2) plume. Though alkalinity buffers formation water pH under elevated CO2 pressure, the acidic pH significantly enhances mineral dissolution in reactors with heterogeneous Hutton and Boxvale Sandstone samples. Smaller TDS changes are observed for samples of the mature Precipice Sandstone than for the other formations. Non-radiogenic, regional groundwater-like 87Sr/86Sr values (0.704845 - 0.706600) in batch reactors indicate carbonate and authigenic clay dissolution as the primary reaction pathways regulating solution composition in all formations during carbon sequestration. Slightly higher Sr isotope ratios in felsic samples than in calcitic samples, and dissolved Si concentrations in mature Precipice Sandstone reactors show detrital silicate dissolution to be an ancillary process. Batch reactor degassing at the end of the incubation period was simulated to assess geochemical changes in formation waters during transport away from a scCO2 plume. Model results suggest geological sequestration in the Jurassic sandstone formations would increase regional groundwater alkalinity and redistribute carbonate minerals outside the scCO2 footprint, but is unlikely to result in net mineral trapping of CO2. Several elements are mobilised in concentrations greater than found in regional groundwater, making them viable tracers of CO2 migration. Most notable is cobalt, concentrations of which are significantly elevated regardless of CO2 pressure or sample mineralogy. Experimental results indicate manganese and cadmium concentrations may locally exceed drinking water quality guidelines, but further modelling of intra aquifer mixing is required to quantify the potential risk to regional groundwaters from trace element mobilisation.

Brumbys 1 was an appraisal well drilled and cored through Brumbys Fault at the CO2CRC Otway International Test Centre in 2018. The Otway Project is located in South West Victoria, on private farming property approximately 35 km southeast of Warrnambool and approximately 10 km northwest of the town of Peterborough. Total measured depth was 126.6 m (80 degrees). Sonic drilling enabled excellent core recovery and the borehole was completed as a groundwater monitoring well. Brumbys 1 cores through the upper Hesse Clay, Port Campbell Limestone and extends into the Gellibrand Marl. This dataset compiles the extensive analysis undertaken on the core. Analysis includes: Core log; Foram Analysis; Paleodepth; % Carbonate (CaCO3); X-Ray Fluorescence Spectrometry (XRF); Inductively Coupled Plasma Mass Spectrometry (ICP-MS); X-Ray Diffraction (XRD); Grain Size; Density; Surface Area Analysis (SAA); Gamma. Samples were taken at approximately 1-2 m intervals.

Exploring for the Future (EFTF) is an Australian Government program led by Geoscience Australia, in partnership with state and Northern Territory governments. This first phase of the EFTF program (2016–2020) aimed to assist industry investment in resource exploration in frontier regions of northern Australia by providing precompetitive data and information about energy, mineral and groundwater resource potential. As part of this initiative, this record presents whole-rock inorganic geochemistry data including X-ray fluorescence (XRF) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) analyses and quantitative X-ray diffraction (qXRD) results for 67 drill core and cuttings samples of sedimentary rocks from Barnicarndy 1 drilled in the Barnicarndy Graben of the Canning Basin. The inorganic geochemistry analyses were undertaken by Geoscience Australia and Bureau Veritas (BV). This work complements other components of the EFTF program, including a comprehensive sampling program of the Barnicarndy 1 deep stratigraphic well, the Kidson Sub-basin seismic survey, and the Kidson Sub-basin petroleum systems model to better understand the geological evolution, basin architecture and petroleum prospectivity of the region.

This service provides access to inorganic geochemistry data obtained from chemical analyses of rock and regolith samples collected during mapping and sampling programs in Australia. This service will provide a spatial distribution of the sample attributes as well as provide a spatial distribution of the analytical composition of the samples with respect to major elements, minor elements and rare earth elements. This service includes original inorganic geochemistry data levelled to reference datasets.

This service provides access to inorganic geochemistry data obtained from chemical analyses of rock and regolith samples collected during mapping and sampling programs in Australia. This service will provide a spatial distribution of the sample attributes as well as provide a spatial distribution of the analytical composition of the samples with respect to major elements, minor elements and rare earth elements. This service includes original inorganic geochemistry data levelled to reference datasets.

Paleoproterozoic arc and backarc assemblages accreted to the south Laurentian margin between 1800 Ma and 1600 Ma, and previously thought to be indigenous to North America, more likely represent fragments of a dismembered marginal sea developed outboard of the formerly opposing Australian-Antarctic plate. Fugitive elements of this arc-backarc system in North America share a common geological record with their left-behind Australia-Antarctic counterparts, including discrete peaks in tectonic and/or magmatic activity at 1780 Ma, 1760 Ma, 1740 Ma, 1710-1705 Ma, 1690-1670 Ma, 1650 Ma and 1620 Ma. Subduction rollback, ocean basin closure and the arrival of Laurentia at the Australian-Antarctic convergent margin first led to arc-continent collision at 1650-1640 Ma and then continent-continent collision by 1620 Ma as the last vestiges of the backarc basin collapsed. Collision induced obduction and transfer of the arc and more outboard parts of the Australian-Antarctic backarc basin onto the Laurentian margin where they remained following later breakup of the Neoproterozoic Rodinia supercontinent. North American felsic rocks generally yield Nd depleted mantle model ages consistent with arc and backarc assemblages built on early Paleoproterozoic Australian crust as opposed to older Archean basement making up the now underlying Wyoming and Superior cratons. Appeared in Lithosphere (2019) 11 (4): 551–559, June 10, 2019.

The Paleo- to Mesoproterozoic McArthur Basin and Mount Isa region of northern Australia (Figure 1) is richly-endowed with a range of deposit types (e.g., Ahmad et al., 2013; Geological Survey of Queensland, 2011). These include the basin-hosted base metal (Zn-Pb-Ag) deposits of the North Australian Zinc Belt, the richest zinc province in the world (Geological Survey of Queensland, 2011; Huston et al., 2006), as well as Cu (e.g., Mt Isa Copper) and IOCG (e.g., Ernest Henry) deposits (Geological Survey of Queensland, 2011). The giant size of the base metal deposits makes them attractive exploration targets and significant effort has been undertaken in understanding their genesis and setting and developing methodologies and data sets to aid in further discovery. As part of its Exploring for the Future program, Geoscience Australia is acquiring new, and reprocessing old, data sets to provide industry with new exploration tools for these basin-hosted Zn-Pb and Cu deposits, as well as iron-oxide copper-gold deposits. We have adopted a mineral systems approach (e.g., Huston et al., 2016) focussing on regional aspects such as source rocks, locations of mineral deposits, mineralisation haloes and footprints. Increased understanding of these aspects requires knowledge of the background variability of unaltered rocks within the basin. To assist in this we have undertaken a campaign of baseline geochemical studies, with over 800 new samples collected from sedimentary and igneous units of selected parts of the greater McArthur Basin–Mount Isa region. This has allowed us to document temporal and regional background geochemical (and mineralogical) variation within, and between sedimentary and igneous units. The main focus of this work was directed towards aspects of base metal mineralisation; a concurrent GA study (e.g., Jarrett et al., 2019) looking at aspects of hydrocarbon potential was undertaken in parallel. Appeared in Annual Geoscience Exploration Seminar (AGES) Proceedings, Alice Springs, Northern Territory 24-25 March 2020, p. 105

As part of Geoscience Australia's Exploring for the Future program, the East Tennant region, which is centred on the Barkly Roadhouse in the Northern Territory, was identified as having favourable geological and geophysical indicators of mineral systems potential. Potentially prospective stratigraphy in the East Tennant region is completely concealed beneath Mesoproterozoic to Quaternary cover sequences. Prior to 2020 basement rocks in the East Tennant region were only known from a handful of legacy boreholes, supported by geophysical interpretation. In order to test geophysical interpretations and obtain additional samples of basement rocks for detailed analysis, a stratigraphic drilling campaign was undertaken in the East Tennant region as part of the MinEx CRC’s National Drilling Initiative. Ten stratigraphic boreholes were drilled through the cover sequences and into basement for a total of nearly 4000 m, including over 1500 m of diamond cored basement rocks to be used for scientific purposes. Inorganic geochemical samples from East Tennant National Drilling Initiative boreholes were taken to characterise cover and basement rocks intersected during drilling. Two sampling approaches were implemented based on the rocks intersected: 1) Borehole NDIBK04 contained localised sulphide mineralisation and elevated concentrations of several economically-significant elements in portable X-ray fluorescence data. In order to understand the geochemical variability and distribution of elements important for mineral system characterisation, the entire basement interval was sampled at nominal one metre intervals. This spacing was reduced to between 0.5 and 0.25 m from 237 m to 263 m to better understand a more intense zone of mineralisation, and 2) Samples from boreholes NDIBK01, NDIBK02, NDIBK03, NDIBK05, NDIBK06, NDIBK07, NDIBK08, NDIBK09 and NDIBK10 were selected to capture lithological and geochemical variability to establish bulk rock geochemical compositions for further interpretation. Attempts were made to sample representative, lithologically consistent intervals. A total of 402 samples were selected for analysis. Sample preparation was completed at Geoscience Australia and Bureau Veritas, with all analyses performed by Bureau Veritas in Perth. All samples were submitted for X-ray fluorescence (XRF), laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), FeO determination, and loss on ignition (LOI). Samples from borehole NDIBK04 also underwent total combustion C and S, and Pb collection fire assay by ICP-MS for determination of Au, Pt and Pd concentrations. This data release presents inorganic geochemistry data acquired on rock samples from the ten East Tennant National Drilling Initiative boreholes.

This database contains geochemical data for samples analysed both for inorganic and organic geochemistry. Analytical data are sourced from Geoscience Australia's Inorganic Geochemistry Database (OZCHEM) and Organic Geochemistry Database (ORGCHEM), respectively. The data are joined on a unique sample number. Inorganic geochemical data cover the majority of the periodic table, with metadata on analytical methods and detection limits. Organic geochemical data include results of pyrolysis, derivative calculated values, and, where available, isotopic composition of carbonates (D13C) and isotopic composition of rock nitrogen (D15N). Further, there are provisions for delivery of isotopic data for kerogen (H, C, N) and oxygen (O) for carbonates. Where available, sample descriptions include stratigraphic unit names and ages, and lithology. Location information includes coordinates of the sampled feature (eg, borehole), coordinates of the sample and sample depth. Interpretation of the combined inorganic and organic geochemistry for organic-rich shales will facilitate comprehensive characterisation of hydrocarbons source rocks and mineral commodities source and trap environments. All are achieved within the frameworks of petroleum and mineral systems analysis. The initial data delivered by this service include 1785 samples from 35 boreholes from 14 geological provinces, including recently released data for 442 samples from the South Nicholson National Drilling Initiative Carrara 1 stratigraphic drill hole (Butcher et al., 2021; Carson et al., 2021). Many sampled boreholes are located within the polygon of the Exploring for the Future Barkly-Isa-Georgetown project. This dataset will be updated periodically as more data become available.

A comprehensive compilation of rock, regolith and groundwater geochemistry across the Curnamona Province and overlying basins. This product is part of the Curnamona Geochemistry module of GA's Exploring for the Future program, which is seeking to understand geochemical baselines within the Curnamona Province to support mineral exploration under cover. Data is sourced from GA, CSIRO and state databases, and run through a quality control process to address common database issues (such as unit errors). The data has been separated by sample type and migrated into a standard data structure to make the data internally consistent. A central source for cleaned geochemical data in the same data format is a valuable resource for further research and exploration in the region.