<div>Mount Isa Province in northern Australia is one of the world's most strongly endowed regions for base metals and host to major iron-oxide-copper-gold (IOCG) deposits. The Carpentaria Conductivity Anomaly at the eastern margin of the Province is a major electrical conductivity structure of the Australian continent. We have used magnetotelluric and deep seismic reflection data to image the crustal architecture in this complex region to understand the crustal-scale fluid pathways and potential mineral occurrences. The resistivity models reveal a number of prominent crustal-scale conductors, suggesting that the Carpentaria Conductivity Anomaly is likely caused by a series of isolated or interconnected bodies. These conductors characterise the position and geometry of the ancient Gidyea Suture Zone, interpreted as a west-dipping subduction zone. The conductivity anomaly may record the activity of fluid hydration involved during a subduction event, with the enhanced conductivity likely being caused by deformation or mineralisation of graphitic or sulfidic rocks during orogensis. The distribution of known gold and copper deposits shows a close spatial correlation with the suture zone, suggesting that this structure is potentially a fundamental control on IOCG deposits in its vicinity. The interpretation of the seismic image shows a good correlation with the resistivity models. The implication is that crustal-penetrating structures act as potential pathways for fluid movement to form mineral deposits in the upper crust. The significance of mapping such structures using geophysics is highlighted for mineral exploration.</div><div><br></div>This Abstract was submitted/presented to the 2022 Sub 22 Conference 28-30 November (http://sub22.w.tas.currinda.com/)

<div>This document defines the technical standards set by Geoscience Australia for the acquisition, processing and supply of airborne magnetic, horizontal magnetic gradient and radiometric (gamma-ray spectrometric) data. The technical standards cover the requirements for equipment, calibrations, quality control checks, reporting and data formats for airborne surveys.</div><div><br></div><div><br></div><div><strong>Table of Contents</strong></div><div><br></div><div>Attachment 1A – Data Acquisition and Processing</div><div><br></div><div>1 Aircraft</div><div>2 Flight and Tie Lines</div><div>3 Global Navigation Satellite System (GNSS)</div><div>4 Parallax Correction</div><div>5 Altimeter</div><div>6 Barometer</div><div>7 Digital Elevation Model</div><div>8 Magnetic System Equipment</div><div>9 Magnetic Gradient System Equipment</div><div>10 Magnetic / Gradient Calibration and Quality Tolerances</div><div>11 Magnetic Base Station (Diurnal Monitoring)</div><div>12 Magnetic Data Reduction</div><div>13 Magnetic Gradient Data Reduction</div><div>14 Radiometric System Equipment</div><div>15 Radiometric Calibration and Quality Tolerances</div><div>16 Radiometric Data Reduction</div><div><br></div><div>Attachment 1B – Reporting and Data Supply</div><div><br></div><div>1 General</div><div>2 Calibration Report</div><div>3 Daily Acquisition Report</div><div>4 Weekly Acquisition Report</div><div>5 Operations and Processing Summary Report</div><div>6 Supply Schedule</div><div><br></div><div>Attachment 1C – Data Formats</div><div><br></div><div>1 General</div><div>2 Point-Located Data Files</div><div>3 Definition Files</div><div>4 Description Files</div><div>5 Raw-Edited Magnetic Data File</div><div>6 Reduced Magnetic Data File</div><div>7 Diurnal Magnetic Data File</div><div>8 Raw-Edited Magnetic Gradient Data File</div><div>9 Reduced Magnetic Gradiometry Data File</div><div>10 Raw-Edited Radiometric Data File</div><div>11 Reduced Radiometric Data File</div><div>12 Gridded Data Files</div><div>13 Image Enhanced GeoTIFF Files

<div> A key issue for explorers in Australia is the abundant sedimentary and regolith cover obscuring access to underlying potentially prospective rocks. &nbsp;Multilayered chronostratigraphic interpretation of regional broad line-spaced (~20&nbsp;km) airborne electromagnetic (AEM) conductivity sections have led to breakthroughs in Australia’s near-surface geoscience. &nbsp;A dedicated/systematic workflow has been developed to characterise the thickness of cover and the depth to basement rocks, by delineating contact geometries, and by capturing stratigraphic units, their ages and relationships. &nbsp;Results provide a fundamental geological framework, currently covering 27% of the Australian continent, or approximately 2,085,000&nbsp;km2. &nbsp;Delivery as precompetitive data in various non-proprietary formats and on various platforms ensures that these interpretations represent an enduring and meaningful contribution to academia, government and industry.&nbsp;The outputs support resource exploration, hazard mapping, environmental management, and uncertainty attribution.&nbsp;This work encourages exploration investment, can reduce exploration risks and costs, helps expand search area whilst aiding target identification, and allows users to make well-informed decisions. Presented herein are some key findings from interpretations in potentially prospective, yet in some cases, underexplored regions from around Australia.&nbsp;</div> This abstract was submitted & presented to the 8th International Airborne Electromagnetics Workshop (AEM2023) (https://www.aseg.org.au/news/aem-2023)

<div>Near-surface magnetizations are ubiquitous across many areas of Australia and complicate reliable estimation of depth to deeper magnetizations. We have selected four test areas in which we use equivalent source dipoles to represent and quantify the near-surface magnetizations. We present a synthetic modelling study that demonstrates that field variations from the near-surface magnetizations substantially degrade estimation of depth to a magnetization 500 metres below the modelled sensor elevation and that these problems persist even for anomalies with significantly higher amplitudes. However, preferential attenuation of the fields from near surface magnetizations by upward continuation proved quite effective in improving estimation of depth to those magnetizations.</div> This Abstract was submitted/presented at the 2023 Australasian Exploration Geoscience Conference (AEGC) 13-18 March (https://2023.aegc.com.au/)

<div>The Magnetotelluric (MT) Sites database contains the location of sites where magnetotelluric (MT) data have been acquired by surveys. These surveys have been undertaken by Geoscience Australia and its predecessor organisations and collaborative partners including, but not limited to, the Geological Survey of New South Wales, the Northern Territory Geological Survey, the Geological Survey of Queensland, the Geological Survey of South Australia, Mineral Resources Tasmania, the Geological Survey of Victoria and the Geological Survey of Western Australia and their parent government departments, AuScope, the University of Adelaide, Curtin University and University of Tasmania. Database development was completed as part of Exploring for the Future (EFTF) and the database will utilised for ongoing storage of site information from future MT acquisition projects beyond EFTF. Location, elevation, data acquisition date and instrument information are provided with each site. The MT Sites database is a subset of tables within the larger Geophysical Surveys and Datasets Database. </div><div><br></div><div>The resource is accessible via the Geoscience Australia Portal&nbsp;(https://portal.ga.gov.au/), use Magnetotelluric as your search term to find the relevant data.</div>

<div>The active seismic and passive seismic database contains metadata about Australian land seismic surveys acquired by Geoscience Australia and its collaborative partners. </div><div>For active seismic this is onshore surveys with metadata including survey header data, line location and positional information, and the energy source type and parameters used to acquire the seismic line data. For passive seismic this metadata includes information about station name and location, start and end dates, operators and instruments. Each also contains a field that contains links to the published data. </div><div><br></div><div>The active and passive seismic database is a subset of tables within the larger Geophysical Surveys and Datasets Database and development of these databases was completed as part of the second phase of the Exploring for the Future (EFTF) program (2020-2024). The resource is accessible via the Geoscience Australia Portal&nbsp;(https://portal.ga.gov.au/), under 'Geophysics'. Use 'active seismic' or 'passive seismic' as search terms. </div><div><br></div>

<div>As part of the Australia's Resources Framework Project, in the Exploring for the Future Program, Geoscience Australia and CSIRO have undertaken a magnetic source depth study across four areas. These are: 1) the western part of Tasmania that is the southernmost extension of the Darling-Curnamona-Delamerian (DCD) project area; 2) northeastern Queensland; 3) the Officer Basin area of western South Australia and southeastern West Australia; and 4) the 'Eastern Resources Corridor' (ERC) covering eastern South Australia, southwest Queensland, western New South Wales and western Victoria. This study has produced 2005 magnetic estimates of depth to the top of magnetization. The solutions are derived by a consistent methodology (targeted magnetic inversion modelling, or TMIM; also known as ‘sweet-spot’ modelling). </div><div><br></div><div>The magnetic depth estimates produced as part of this study provide depth constraints in data-poor areas. They help to construct a better understanding of the 3D geometry of the Australian continent, and aid cover thickness modelling activities. </div><div><br></div><div>A supplementary interpretation data release is also available through Geoscience Australia's enterprise catalogue (ecat) at https://pid.geoscience.gov.au/dataset/ga/149499.</div><div><br></div><div>Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government. This work contributes to building a better understanding of the Australian continent, whilst giving the Australian public the tools they need to help them make informed decisions in their areas of interest.</div>

<div>Defining and characterising groundwater aquifers usually depends on the availability of data necessary to represent its spatial extent and hydrogeological properties, such as lithological information and aquifer pump test data.&nbsp;In regions where such data is of limited availability and/or variable quality, the characterisation of aquifers for the purposes of water resource assessment and management can be problematic.&nbsp;The Upper Darling River Floodplain region of western New South Wales, Australia, is an area where communities, natural ecosystems and cultural values are dependent on both surface and groundwater resources.&nbsp;Owing to a relative paucity of detailed geological and hydrogeological data across the region we apply two non-invasive geophysical techniques—airborne electromagnetics and surface magnetic resonance—to assist in mapping and characterising the regional alluvial aquifer system.&nbsp;The combination of these techniques in conjunction with limited groundwater quality data helps define an approximate extent for the low salinity alluvial aquifer in a key part of the Darling River valley system and provides insights into the relative water content and its variation within the aquifer materials.&nbsp;This work demonstrates the utility of these key geophysical data in developing a preliminary understanding of aquifer geometry and heterogeneity, thereby helping to prioritise targets for follow-up hydrogeological investigation. Presented at the 2024 Australian Society of Exploration Geophysicists (ASEG) Discover Symposium

<div>This dataset comprises borehole induction conductivity, natural gamma, and nuclear magnetic resonance (NMR) datasets, and surface magnetic resonance (SMR) data collected as part of the Upper Darling Floodplain groundwater study. Associated methods, interpretation, and integration with other datasets are found in the Upper Darling Floodplain geological and hydrogeological assessment (Geoscience Australia Ecat ID:149689). This project is part of the Exploring for the Future (EFTF) program, an eight-year, $225 million Australian Government funded geoscience data and precompetitive information acquisition program. The dataset contains induction conductivity logs and natural gamma logs for 23 bores, NMR logs for 22 bores, and SMR data for 47 sites. The properties inferred from these datasets for hydrogeological characterisation include water content and porosity (borehole NMR and SMR), lithology (natural gamma), and bulk electrical conductivity (induction conductivity).&nbsp;&nbsp;</div><div><br></div>

<div>Elastic seismic waves propagate in the solid Earth and contain valuable information for inferring subsurface physical properties. Traditionally, the data acquisition requires active artificial sources for generating seismic waves, which can be air-gun arrays for offshore seismic surveys, and explosive or vibroseis sources for onshore seismic surveys. Active-source seismic data have a wide frequency spectrum often from 4 Hz to 50 Hz and contain reflected and refracted P and S waves and surface waves, which have been widely used for obtaining high-resolution images of subsurface structures across industry and academia in the past decades. In this report, we study the feasibility of combining seismic data from borehole drilling (drilling noise) and the state-of-the-art seismic imaging technique, reverse time migration, for a direct migration (imaging) of drilling-generated seismic noise data without intermediate steps (such as seismic interferometry for virtual common-source seismic data), in the aim of obtaining subsurface structural images. The developed imaging method enables informed decision-making during the drilling process by revealing the three-dimensional structure beneath the drill rig. With precise knowledge of the depth to bedrock and the surrounding geological formations, better planning can be achieved, significantly reducing both costs and time.</div>