From 2007 to 2009, the National Geochemical Survey of Australia (NGSA) project collected sediment samples from 1315 sites located in 1186 catchments (~10 % of which were sampled in duplicate) from across Australia. Overbank sediments were chosen as sampling media, with a near-surface sample (Top Outlet Sediment, TOS, from 0-10 cm below the surface) and a bottom sample (Bottom Outlet Sediment, BOS, ~10 cm interval between approximately 60-80 cm below the surface) being collected. The sample sites were selected to be near outlets or spill points of large catchments, so that overbank sediments there could reasonably be assumed to represent well-mixed, fine-grained composite samples of all major rock and soil types present in the catchment. Sample sites and their corresponding sediment samples were subjected to a detailed description and the determination of bulk parameters in the field (texture, moist and dry colour, field pH). This is complemented by a series of laboratory measurements and analyses reported elsewhere. This report documents the complete field dataset and discusses the pH and soil colour data that were collected in the field. At the time of writing, field pH and colour are the only datasets available for all sites. Maps are presented showing the spatial distribution of these data in both TOS and BOS samples. These data will be the basis of further interpretative work.

Soil mapping at the local- (paddock), to continental-scale, may be improved through remote hyperspectral imaging of surface mineralogy. This opportunity is demonstrated for the semiarid Tick Hill test site (20 km2) near Mount Isa in western Queensland, which is part of a larger Queensland government initiative involving the public delivery of 25,000 km2 of processed airborne hyperspectral mineral maps at 4.5 m pixel resolution to the mineral exploration industry. Some of the "soil" mineral maps for the Tick Hill area include the abundances and/or physicochemistries (chemical composition and crystal disorder) of dioctahedral clays (kaolin, illite-muscovite and Al smectite, both montmorillonite and beidellite), ferric/ferrous minerals (hematite/goethite, Fe2+-bearing silicates/carbonates) and hydrated silica (opal) as well as "soil" water (bound and unbound) and green and dry (cellulose/lignin) vegetation. Validation of these hyperspectral mineral products is based on field sampling and laboratory analyses (spectral reflectance, X-ray diffraction, scanning electron microscope and electron backscatter). The mineral maps show more detailed information regards the surface composition compared with the published soil and geology (1:100,000 scale) maps and airborne radiometric imagery (collected at 200 m line spacing). This mineral information can be used to improve the published mapping but also has the potential to provide quantitative information suitable for soil modeling/monitoring.

The use of airborne hyperspectral imagery for mapping soil surface mineralogy is examined for the semi-arid Tick Hill test site (20 km2) near Mount Isa in north-western Queensland. Mineral maps at 4.5 m pixel resolution include the abundances and physicochemistries (chemical composition and crystal disorder) of kaolin, illite-muscovite, and Al smectite (both montmorillonite and beidellite), as well as iron oxide, hydrated silica (opal), and soil/rock water (bound and unbound). Validation of these hyperspectral mineral maps involved field sampling (34 sites) and laboratory analyses (spectral reflectance and X-ray diffraction). The field spectral data were processed for their mineral information content the same way as the airborne HyMap data processing. The results showed significant spatial and statistical correlation. The mineral maps provide more detailed surface compositional information compared with the published soil and geology maps and other geoscience data (airborne radiometrics and digital elevation model). However, there is no apparent correlation between the published soil types (i.e. Ferrosols, Vertosols, and Tenosols) and the hyperspectral mineral maps (e.g. iron oxide-rich areas are not mapped as Ferrosols and smectite-rich areas are not mapped as Vertosols). This lack of correlation is interpreted to be related to the current lack of spatially comprehensive mineralogy for existing regional soil mapping. If correct, then this new, quantitative mineral mapping data has the potential to improve not just soil mapping but also soil and water catchment monitoring and modeling at local to regional scales. The challenges to achieving this outcome include gaining access to continental-scale hyperspectral data and models that link the surface mineralogy to subsurface soil characteristics/processes.

Geoscience Australia and the CO2CRC have constructed a greenhouse gas controlled release facility at an experimental agricultural station maintained by CSIRO Plant Industry at Ginninderra, Canberra. The facility is designed to simulate surface emissions of CO2 (and other greenhouse gases) from the soil into the atmosphere. CO2 is injected into the soil is via a 120m long slotted HDPE pipe installed horizontally 2m underground. This is fitted with a straddle packer system to partition the well into six CO2 injection chambers with each chamber connected to its own CO2 injection line. CO2 was injected into 5 of the chambers during the first sub-surface release experiment (March - May 2012) and the total daily injection rate was 100 kg/d. A krypton tracer was injected into one of the 5 chambers at a rate of 10 mL/min. Monitoring methods trialled at the site include eddy covariance, atmospheric tomography using a wireless networked array of solar powered CO2 stations, soil flux, soil gas, frequency-domain electromagnetics (FDEM), soil community DNA analysis, and krypton tracer studies (soil gas and air). A summary of the findings will be presented. Paper presented at the 2012 CO2CRC Research Symposium, Sunshine Beach, 27-29 November 2012.

Abstract The ability of thermal infrared (TIR) spectroscopy to characterise mineral and textural content was evaluated for soil samples collected in the semi-arid environment of north-western Queensland, Australia. Grain size analysis and separation of clay, silt and sand sized soil fractions were undertaken to establish the relationship between quartz and clay emissivity signatures and soil texture. Spectral band parameters, based on thermal infrared specular and volume scattering features, were found to discriminate fine clay mineral-rich soil from mostly coarser quartz-rich sandy soil, and to a lesser extent, from the silty quartz-rich soil. This study found that there was the potential for quantifying soil mineral and texture content using TIR spectroscopy. Key Words Soil composition, quartz, kaolinite, smectite, grain size, Tick Hill

The National Geochemical Survey of Australia (NGSA) project has collected catchment outlet sediment samples from 1315 sites located in 1186 catchments (~10% of which were sampled in duplicate) covering over 80% of Australia, in a collaborative venture between Geoscience Australia and the geoscience agencies of all States and the Northern Territory. At each site, composited samples were collected from two depth intervals: (1) the Top Outlet Sediment from 0-10 cm depth, and (2) the Bottom Outlet Sediment from 60-80 cm depth on average. In the laboratory, the samples were dried, homogenised and separated into two grain-size fractions: (1) a 'coarse' fraction (0-2 mm), and (2) a 'fine' fraction (0-75 um). All together, thus, 5260 samples were prepared for analysis. Bulk splits were also separated for the determination of bulk properties. Samples were analysed for up to 68 chemical elements after Total, Aqua Regia and Mobile Metal Ion digestion methods. Several quality control measures were taken throughout the project and the data quality was assessed in a separate report. This report used the acquired geochemical data to investigate the preliminary implications of this new national dataset on exploration for energy and mineral resources in Australia. This was mostly done by overlaying the NGSA data on coverages of known deposits and occurrences for selected commodities: uranium (U), thorium (Th), gold (Au), copper (Cu), lead (Pb), zinc (Zn) and Rare Earth Elements (REEs). For U, an attempt was made to distinguish between calcrete-related and intrusion-related deposit types, and a local case study in the Pine Creek area is also presented. For Zn, preliminary results from an investigation into discrete field modelling using concentration-area (CA) fractal plots are also presented. Coincidence of known mineral deposits and occurrences with elevated geochemical element concentrations in the same catchment are highlighted. Several catchments have elevated geochemical element concentrations in catchments with no known mineral deposits or occurrences, which provide potential targets for exploration. This technique constitutes a useful and rapid tool for area selection where further, more detailed exploration effort could be expended to test these geochemical anomalies.

This report deals with an investigation of the electrical resistivities of a variety of wet surface soils, gravels and sands. The work may be regarded as preliminary to an investigation by Mr. R.F. Thyer into the detection of electrically resistive bodies buried in wet soils at shallow depths. It was required to determine the range over which the resistivities of surface soils vary, and also the changes that may be expected in any one type of soil between measurements made within any 1 foot of each other. Measurements were made in four localities, three being in the bed or on the banks of the Molonglo River, where the surface materials are sand, gravel, silts, and in some places, clay. The fourth locality was near the head of Sullivan's Creek, where the soil is a heavy black clay.

This report deals with the problem of detecting electrically resistive bodies of small size buried at shallow depths in wet soils. Detection was attempted by means of measurements made on the surface of the soil using the electrical resistivity method. The present report can be regarded as an extension of an earlier one (No. 1943/64B). The purpose of the new tests was twofold. Firstly it was proposed to make tests of 'normal' resistivity effects using a constant electrode arrangement and measuring the resistivity at closely spaced points on water saturated soils. The second part of the testing programme was contingent on the first part proving that under saturated conditions soil resistivities were sufficiently constant to warrent an attempt being made at detection. If this condition of constancy existed, it was proposed to extend the work of the tests, reviewed in the previous report, to actual field conditions. This has been done and the present report deals with the results obtained.

Data gathered in the field during the sample collection phase of the National Geochemical Survey of Australia (NGSA) has been used to compile the Preliminary Soil pH map of Australia. The map, which was completed in late 2009, offers a first-order estimate of where acid or alkaline soil conditions are likely to be expected. It provides fundamental datasets that can be used for mineral exploration and resource potential evaluation, environmental monitoring, landuse policy development, and geomedical studies into the health of humans, animals and plants.

A new continental-scale geochemical atlas and dataset for Australia were officially released into the public domain at the end of June 2011. The National Geochemical Survey of Australia (NGSA) project, which started in 2007 under the Australian Government's Onshore Energy Security Program at Geoscience Australia, aimed at filling a huge knowledge gap relating to the geochemical composition of surface and near-surface materials in Australia. Better understanding the concentration levels and spatial distributions of chemical elements in the regolith has profound implications for energy and mineral exploration, as well as for natural resource management. In this world first project, a uniform regolith medium was sampled at an ultra-low density over nearly the entire continent, and subsamples from two depths and two grain-size fractions were analysed using up to three different (total, strong and weak) chemical digestions. This procedure yielded an internally consistent and comprehensive geochemical dataset for 68 chemical elements (plus additional bulk properties). From its inception, the emphasis of the project has been on quality control and documentation of procedures and results, and this has resulted in eight reports (including an atlas containing over 500 geochemical maps) and a large geochemical dataset representing the significant deliverables of this ambitious and innovative project. The NGSA project was carried out in collaboration with the geoscience agencies from every State and the Northern Territory under National Geoscience Agreements. .../...