Difference between 'pre-development' (1900-1920) and modern (2000-2010) groundwater levels at selected bore locations in the Great Artesian Basin This GIS data set was produced by CSIRO for the Great Artesian Basin Water Resource Assessment and used in Figure 7.5 of Ransley TR and Smerdon BD (eds) (2012) Hydrostratigraphy, hydrogeology and system conceptualisation of the Great Artesian Basin. A technical report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. This dataset and associated metadata can be obtained from www.ga.gov.au, using catalogue number 76931. For further information contact Phil Davies, Research Projects Officer, CSIRO Land and Water, Waite Road, Urrbrae SA 5064

Polygons representing a qualitative estimate of the potential for hydraulic interconnection between the base of the Great Artesian Basin and top of underlying basement units. This dataset is derived from the 'Hydrogeological basement units in contact with the base of the Great Artesian Basin' dataset (Geoscience Australia, catalogue #75910, 2013) and 'Base Great Artesian Basin hydrogeological units in contact with basement' dataset (Geoscience Australia, catalogue #75911, 2013). It is used to identify potential hydraulic interconnection between the Great Artesian Basin and basement units. Data is available as polygons in Shapefile format This GIS data set was produced for the Great Artesian Basin Water Resource Assessment and used in Figure 3.6 of Smerdon BD, Ransley TR, Radke BM and Kellett JR (2012) Water resource assessment for the Great Artesian Basin. A report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. This dataset and associated metadata can be obtained from www.ga.gov.au, using catalogue number 75839.

Cenozoic surface geology overlying the Carpentaria and Laura basins showing boundaries of the Bulimba Cycle, Wyaaba Cycle and the Claraville Cycle sediment packages. Data is available as polygons in Shapefile format. This data set was used in: Figure 3.4 of Ransley TR and Smerdon BD (eds) (2012) Hydrostratigraphy, hydrogeology and system conceptualisation of the Great Artesian Basin. A technical report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. Figure 1.4 of Smerdon BD, Ransley TR, Radke BM and Kellett JR (2012) Water resource assessment for the Great Artesian Basin. A report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. Figure 5.10 of Smerdon BD, Welsh WD and Ransley TR (eds) (2012) Water resource assessment for the Carpentaria region. A report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. This dataset and associated metadata can be obtained from www.ga.gov.au, using catalogue number 75843.

These grids represent the potentiometric surface of the Cadna-owie - Hooray Aquifer in the Great Artesian Basin at 20 year intervals from 1900-2010. They were interpolated from GAB water table elevations and from observations of hydraulic head obtained from state groundwater databases. Head measurements were density corrected prior to creation of surfaces. Where there were no temperatures supplied with the head measurement to allow correction, temperature was interpolated from dataset 'Great Artesian Basin groundwater temperature' (Geoscience Australia dataset, Catalogue No. 76929, available from http://www.ga.gov.au).The grid surfaces 1900-1920, ?, 2000-2010 account for the possible effects of geological faults on groundwater flow in the GAB. Grids 1900-1920_nf and 2000-2010_nf are without the influence of regional tectonic faulting. Null values assigned as 1.000000e+30. Grid cell size (X, Y) = 5000 m, 5000 m. This GIS data set and metadata was produced by CSIRO for the Great Artesian Basin Water Resource Assessment and used in figures 7.2, 7.3 and 7.4 of Ransley TR and Smerdon BD (eds) (2012) Hydrostratigraphy, hydrogeology and system conceptualisation of the Great Artesian Basin. A technical report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. Projection is Albers equal area conic, with central meridian 143 degrees longitude, standard parallels at -21 and -29 degrees latitude and latitude of projection's origin at -25. For more information, contact: hris Turnadge Research Projects Officer CSIRO Land and Water Waite Road Urrbrae SA 5064

Thickness of Cenozoic sequence in the Karumba and Kalpowar basins overlying the GAB. Data is available as isopachs and raster. Isopachs are in Shapefile format. Rasters are in both ESRI grid and ASCII grid formats. This GIS data set was produced for the Great Artesian Basin Water Resource Assessment and used in: Figure 3.4 of Ransley TR and Smerdon BD (eds) (2012) Hydrostratigraphy, hydrogeology and system conceptualisation of the Great Artesian Basin. A technical report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. Figure 5.10 of Smerdon BD, Welsh WD and Ransley TR (eds) (2012) Water resource assessment for the Carpentaria region. A report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. This dataset and associated metadata can be obtained from www.ga.gov.au, using catalogue number 76535. SOURCE DATA (Continued from Lineage field) Perryman, J. C. (1964). Midwood Exploratory Proprietary Ltd., Completion report, Burketown No.1, A-P 91P, Queensland. Company Report 1480. Brisbane, Geological Survey of Queensland. Raymond, O.L. (2012) Surface Geology of Australia 1:1 million scale dataset 2012 edition. Geoscience Australia. Canberra. (available from http://www.ga.gov.au Catalogue number 74619) Smart J, Grimes KG, Doutch HF and Pinchin J (1980) The Carpentaria and Karumba Basins, north Queensland. Bulletin 202. Bureau of Mineral Resources, Geology and Geophysics, Australia. Williams, L. J. (1976). GSQ Ebagoola 1 - Preliminary lithologic and composite log. Record 1988/14. Brisbane, Queensland Department of Mines and Geological Survey of Queensland. Williams, L. J. and L. M. Gunther (1989). GSQ Dobbyn 1 - Preliminary lithologic and composite log. Record 1989/22. Brisbane, Geological Survey of Queensland.

Thickness of Paleogene-Neogene sequence overlying the Great Artesian Basin Data is available as isopachs and raster. Isopachs are in Shapefile format. Rasters are in both ESRI grid and ASCII grid formats. This GIS data set was produced for the Great Artesian Basin Water Resource Assessment and used in: Figure 3.2 of Ransley TR and Smerdon BD (eds) (2012) Hydrostratigraphy, hydrogeology and system conceptualisation of the Great Artesian Basin. A technical report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. Figure 3.3 of Smerdon BD, Ransley TR, Radke BM and Kellett JR (2012) Water resource assessment for the Great Artesian Basin. A report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. This dataset and associated metadata can be obtained from www.ga.gov.au, using catalogue number 76538. LINEAGE (Continued from Lineage field due to space constraints) METHOD: Data covering the areas of Upper Darling, Lower Namoi was supplied by the NSW government. Contours in the Macquarie region NSW were interpreted from the Cenozoic isopachs taken from Macaulay, S. & Kellett, J. (2009) Lower Balonne Deep Lead tertiary isopach contours captured from a National Action Plan for Salinity and Water Quality report (Chamberlain, T. & Wilkinson, K., 2004; Kellett et.al. 2004). Isopachs in the southern portion of the GAB were captured from the Cainozoic Structural Features page 22 of Palaeogeographic Atlas of Australia: Cainozoic (Langford & Wilford, 1995) Isopachs over the Poolowanna Trough and Cooper Basin region were taken from Tertiary Stratigraphy and Tectonics, Eromanga Basin (Moussavi-Harami, R. & Alexander, E., 1998) Isopachs in the central Eromanga Basin, Queensland came from Senior 1978. Position and boundary of the Condamine Basin from Klohn, Crippen & Berger, 2011 - feasibility of injecting CSG water into the central Condamine Alluvium - Summary. Report prepared for department of Environment and Resource Management, Queensland, 8p. Isopachs came from the Cainozoic Structural Features page 22 of Palaeogeographic Atlas of Australia: Cainozoic (Langford & Wilford, 1995) Drill-hole data sourced from PIRSA (2007) and GABLOG (Habermehl, 2001) databases, Gibson et al 1974, and well completion reports from GSQ (Queensland Department of Natural Resources and Mines, 2012). Data were used to interpolate a surface using the Topo to Raster tool in the ArcGIS Spatial analyst toolset and the resulting raster was clipped to the Great Artesian Basin Water Resource project boundary. Isopach contours were generated from the raster, using the Contour tool in the 3d analyst toolset in ArcGIS. METHOD

This data set contains spatial data that represent the results of data worth analyses based on linear prediction uncertainty analysis and using the original GABtran groundwater flow model. Datasets with the suffix "increase" represent the data worth of observations calculated from their inclusion in a model calibration process. Datasets with the suffix "decrease" represent the data worth of observations calculated from their removal from a model calibration process. The remaining part of the filename indicates for which GABWRA reporting region the dataset relates. Projection information is in the file GABWRA.prj. Cell size is 5000m x 5000m 'No data' value is -9999 This data and metadata were produced by CSIRO for the Great Artesian Basin Water Resource Assessment. The data is used in figures 5.10-5.16 of Welsh WD, Moore CR, Turnadge CJ, Smith AJ and Barr TM (2012) "Modelling of climate and groundwater development. A technical report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment ". CSIRO Water for a Healthy Country Flagship, Australia. Projection is Albers equal area conic, with central meridian 143 degrees longitude, standard parallels at -21 and -29 degrees latitude and latitude of projection's origin at -25.

Modelled groundwater levels from 2010 to 2070 used to estimate the impact of climate change and future groundwater resource development on groundwater levels in the GAB. The modelling considered different scenarios of climate and groundwater development: Scenario A (historical climate and current development); Scenario C (future climate and current development) and Scenario D (future climate and future development). The future climate scenarios included the wet extreme (wet), the median (mid) and the dry extreme (dry). The raster grids "Ddry.grd", "Dmid.grd" and "Dwet.grd" show predicted hydraulic head for the year 2070 based on projections of future climate and future development. The grids "Ddry-Base.grd", "Dmid-Base.grd" and "Dwet-Base.grd" represent predicted differences between the hydraulic heads produced by Scenario D at 2070, and the modelled spatial distributions of hydraulic head for the year 2010 (Base scenario). The grid "Dmid-Cmid.grd" represents the difference between the 2070 spatial distributions of hydraulic head that were produced by Scenario D (mid) and Scenario C (mid) 'No data' value is 1e30 Cell size is 5000m x 5000m This data and metadata were produced by CSIRO for the Great Artesian Basin Water Resource Assessment. For more information, please refer to Welsh WD, Moore CR, Turnadge CJ, Smith AJ and Barr TM (2012) "Modelling of climate and groundwater development. A technical report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment ". CSIRO Water for a Healthy Country Flagship, Australia. Projection is Albers equal area conic, with central meridian 143 degrees longitude, standard parallels at -21 and -29 degrees latitude and latitude of projection's origin at -25.

Polygons representing a regional interpretation of the of the Jurassic-Cretaceous stratigraphic units at the base of the GAB, as hydrostratigraphic units. To be used in conjunction with dataset 'Hydrogeological basement units in contact with the base of the Great Artesian Basin' (Geoscience Australia dataset, Catalogue #75910) to represent areas of potential hydraulic interconnection between the Great Artesian Basin and basement hydrogeological units. Data is available in Shapefile format This GIS data set was produced for the Great Artesian Basin Water Resource Assessment and used in: Figure 5.8 of Ransley TR and Smerdon BD (eds) (2012) Hydrostratigraphy, hydrogeology and system conceptualisation of the Great Artesian Basin. A technical report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia. Figure 5.12 of Smerdon BD, Welsh WD and Ransley TR (eds) (2012) Water resource assessment for the Carpentaria region. A report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia, plus Figure 7 in the corresponding summary report. Figure 5.4 of Smerdon BD and Ransley TR (eds) (2012) Water resource assessment for the Central Eromanga region. A report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia, plus Figure 7 in the corresponding summary report. Figure 5.7 of Smerdon BD and Ransley TR (eds) (2012) Water resource assessment for the Surat region. A report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia, plus Figure 10 in the corresponding summary report. Figure 5.4 of Smerdon BD, Welsh WD and Ransley TR (eds) (2012) Water resource assessment for the Western Eromanga region. A report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia, plus Figure 8 in the corresponding summary report. Figure 3.6 of Smerdon BD, Ransley TR, Radke BM and Kellett JR (2012) Water resource assessment for the Great Artesian Basin. A report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment. CSIRO Water for a Healthy Country Flagship, Australia, plus Figure 4 in the corresponding summary report. This dataset and associated metadata can be obtained from www.ga.gov.au, using catalogue number 75911.

Modelled groundwater levels from 2010 to 2070 used to estimate the impact of climate change and future groundwater resource development on groundwater levels in the Cape York area of the GAB. The modelling considered different scenarios of climate and groundwater development: Scenario A (historical climate and current development); Scenario C (future climate and current development) and Scenario D (future climate and future development). The future climate scenarios included the wet extreme (wet), the median (mid) and the dry extreme (dry). This data set contains spatial data that were created from the outputs from climate change scenario models using on the Cape York groundwater flow model. The subfolder "heads" contains rasters of spatial distributions of hydraulic head for the year 2070 that were output based on projections of future climate and projections of future groundwater extraction (Scenario D). For each climate change scenario there are three outputs: one for each modelled aquifer thickness (100, 150 and 200 metres). The subfolder "differences" contains rasters of differences between the spatial distributions of hydraulic head that were output by future use scenario models and by either (a) the respective "A scenario" model or (b) the respective "Base scenario" model (the modelled hydraulic head for the year 2010). 'No data' value is 1e30 for heads rasters, -9999 for differences rasters Cell size is 5000m x 5000m For more information, please refer to Welsh WD, Moore CR, Turnadge CJ, Smith AJ and Barr TM (2012) "Modelling of climate and groundwater development. A technical report to the Australian Government from the CSIRO Great Artesian Basin Water Resource Assessment ". CSIRO Water for a Healthy Country Flagship, Australia. Projection is Albers equal area conic, with central meridian 143 degrees longitude, standard parallels at -21 and -29 degrees latitude and latitude of projection's origin at -25.