This resource contains multibeam bathymetry data for the continental shelf area of Flinders Commonwealth Marine Reserve, northeast Tasmania. Multibeam data were collected by Geoscience Australia and University of Tasmania during the period of 24 June - 07 July 2012 onboard the RV Challenger using a Kongsberg EM3002 multibeam sonar. The Flinders Marine Reserve survey was led by Dr. Scott Nichol (Geoscience Australia). The survey was conducted to broadly classify the seabed into hard (bedrock reef), soft (sedimentary) and mixed substrate types at select locations across the shelf. The dataset contains a 2m-resolution, 32-bit floating point GeoTIFF file of the bathymetry in the study area derived from the processed EM3002 bathymetry data, using Caris HIPS and SIPS software. Attribution statement: Data was sourced from the NERP Marine Biodiversity Hub. The Marine Biodiversity Hub is supported through funding from the Australian Government's National Environmental Research Program (NERP), administered by the Department of Sustainability, Environment, Water, Population and Communities (DSEWPAC). This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.

A benthic sediment sampling survey (GA0356) to the nearshore areas of outer Darwin Harbour was undertaken in the period from 03 July to 14 September 2016. Partners involved in the survey included Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Department of Environment and Natural Resources within the Northern Territory Government (NT DENR) (formerly the Department of Land and Resource Management (DLRM)). This survey forms part of a four year (2014-2018) science program aimed at improving knowledge about the marine environments in the regions around Darwin and Bynoe Harbour’s through the collection and collation of baseline data that will enable the creation of thematic habitat maps to underpin marine resource management decisions. This project is being led by the Northern Territory Government and is supported by the INPEX-led Ichthys LNG Project, in collaboration with - and co-investment from GA and AIMS. The program builds upon an NT Government project (2011-2011) which saw the collection of baseline data (multibeam echosounder data, sediment samples and video transects) from inner Darwin Harbour (Siwabessy et al. 2015). This dataset comprises Total sediment metabolism, %carbonate, organic isotope (C and N) and organic and inorganic element data from seabed sediments. Radke, L., Smit, N., Li, J., Nicholas, T., Picard, K. 2017. Outer Darwin Harbour Shallow Water Sediment Survey 2016: GA0356 – Post-survey report. Record 2017/06. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2017.006 This research was funded by the INPEX-led Ichthys LNG Project via the Northern Territory (NT) Government Department of Land Resource Management (DLRM) (now the Department of Environment and Natural Resources (DENR)), and co-investment from Geoscience Australia (GA) and Australian Institute of Marine Science (AIMS). We are grateful to the following agencies for providing boats and staff, and to the following personal for help with sample acquisition: NT DENR (Danny Low Choy and Rachel Groome), NT Fisheries (Wayne Baldwin, Quentin Allsop, Shane Penny, Chris Errily, Sean Fitzpatrick and Mark Grubert), NT Parks and Wildlife (Ray Chatto, Stewart Weorle, and Luke McLaren) and the Larrakia Rangers (Nelson Tinoco, Kyle Lewfat, Alan Mummery and Steven Dawson). Special thanks to the skippers Danny Low Choy, Wayne Baldwin, Stewart Weorle and Luke McLaren whose seamanship strongly guided the execution of this survey. AIMS generously allowed use of the aquarium and laboratory at the Arafura Timor Sea Research Facility, and Simon Harries and Kirsty McAllister helped with the setup. We would also like to acknowledge and thank GA colleagues including: Matt Carey, Ian Atkinson and Craig Wintle (Engineering and Applied Scientific Services) for the organisation of field supplies and the design of the new core incubation set-up. This dataset is published with the permission of the CEO, Geoscience Australia

This resource contains surface sediment data for Bynoe Harbour collected by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and Department of Land Resource Management (Northern Territory Government) during the period from 2-29 May 2016 on the RV Solander (survey SOL6432/GA4452). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Land Resource Management, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. The specific objectives of the survey were to: 1. Obtain high resolution geophysical (bathymetry) data for outer Darwin Harbour, including Shoal Bay; 2. Characterise substrates (acoustic backscatter properties, grainsize, sediment chemistry) for outer Darwin Harbour, including Shoal Bay; and 3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, underwater photography and video of grab sample locations and oceanographic information including tidal data and sound velocity profiles. This dataset comprises grain size data measured on seabed sediments. A detailed account of the survey is provided in Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas W.A., Picard, K., Radke, L.C., Tran, M., Williams, D. and Whiteway, T., 2016. Bynoe Harbour Marine Survey 2017: GA4452/SOL6432 - Post-survey report. Record 2017/04. Geoscience Australia, Canberra. Thanks to the crew of the RV Solander for help with sample collection, Matt Carey, Craig Wintle and Andrew Hislop from the Observatories and Science Support at Geoscience Australia for technical support and Jodie Smith for reviewing the data. This dataset is published with the permission of the CEO, Geoscience Australia

A benthic sediment sampling survey (GA0356) to the nearshore areas of outer Darwin Harbour was undertaken in the period from 03 July to 14 September 2016. Partners involved in the survey included Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Department of Environment and Natural Resources within the Northern Territory Government (NT DENR) (formerly the Department of Land and Resource Management (DLRM)). This survey forms part of a four year (2014-2018) science program aimed at improving knowledge about the marine environments in the regions around Darwin and Bynoe Harbour’s through the collection and collation of baseline data that will enable the creation of thematic habitat maps to underpin marine resource management decisions. This project is being led by the Northern Territory Government and is supported by the INPEX-led Ichthys LNG Project, in collaboration with - and co-investment from GA and AIMS. The program builds upon an NT Government project (2011-2011) which saw the collection of baseline data (multibeam echosounder data, sediment samples and video transects) from inner Darwin Harbour (Siwabessy et al. 2015). This dataset comprises porosity and chlorin measurements (concentrations and indices) on seabed sediments. Radke, L., Smit, N., Li, J., Nicholas, T., Picard, K. 2017. Outer Darwin Harbour Shallow Water Sediment Survey 2016: GA0356 – Post-survey report. Record 2017/06. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2017.006 This research was funded by the INPEX-led Ichthys LNG Project via the Northern Territory (NT) Government Department of Land Resource Management (DLRM) (now the Department of Environment and Natural Resources (DENR)), and co-investment from Geoscience Australia (GA) and Australian Institute of Marine Science (AIMS). We are grateful to the following agencies for providing boats and staff, and to the following personal for help with sample acquisition: NT DENR (Danny Low Choy and Rachel Groome), NT Fisheries (Wayne Baldwin, Quentin Allsop, Shane Penny, Chris Errily, Sean Fitzpatrick and Mark Grubert), NT Parks and Wildlife (Ray Chatto, Stewart Weorle, and Luke McLaren) and the Larrakia Rangers (Nelson Tinoco, Kyle Lewfat, Alan Mummery and Steven Dawson). Special thanks to the skippers Danny Low Choy, Wayne Baldwin, Stewart Weorle and Luke McLaren whose seamanship strongly guided the execution of this survey. AIMS generously allowed use of the aquarium and laboratory at the Arafura Timor Sea Research Facility, and Simon Harries and Kirsty McAllister helped with the setup. We would also like to acknowledge and thank GA colleagues including: Matt Carey, Ian Atkinson and Craig Wintle (Engineering and Applied Scientific Services) for the organisation of field supplies and the design of the new core incubation set-up. This dataset is published with the permission of the CEO, Geoscience Australia

This dataset contains bathymetry (depth) products from the compilation of all available source bathymetry data within the Great Barrier Reef into a 30 m-resolution Digital Elevation Model (DEM). The Great Barrier Reef (GBR) is the largest coral reef ecosystem on Earth and stretches over 2500 km along the north-eastern Australia margin. Bathymetry mapping of this extensive reef system is vital for the protection of the GBR allowing for the safe navigation of shipping and improved environmental management. Over the past ten years, deep-water multibeam surveys have revealed the highly complex shelf-edge drowned reefs and continental slope canyons. Airborne LiDAR bathymetry acquired by the Australian Hydrographic Service cover most of the GBR reefs, with coverage gaps supplemented by satellite derived bathymetry. The Geoscience Australia-developed Intertidal Elevation Model DEM improves the source data gap along Australia’s vast intertidal zone. All source bathymetry data were extensively edited as point clouds to remove noise, given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum. The High-resolution depth model for the Great Barrier Reef - 30 m (Version 10 Nov 2020) can be downloaded as four separate but overlapping grids, with the area coverage: Great Barrier Reef A 2020 30m 10-17°S 143-147°E Great Barrier Reef B 2020 30m 16-23°S 144-149°E Great Barrier Reef C 2020 30m 18-24°S 148-154°E Great Barrier Reef D 2020 30m 23-29°S 150-156°E There is an updated “Torres Strait Bathymetry 30m 2020 - A High-resolution Depth Model (20200021C)” and can be downloaded at: <a href="http://pid.geoscience.gov.au/dataset/ga/144348">http://pid.geoscience.gov.au/dataset/ga/144348</a> It includes a grid with an area coverage: 8 – 13°S and 139 – 146°E This dataset is not to be used for navigational purposes.

This dataset contains bathymetry (depth) products from the compilation of all available source bathymetry data within the Kerguelen Plateau into a 100 m-resolution Digital Elevation Model (DEM). Heard Island and McDonald Islands are situated on the Kerguelen Plateau within the south-west Indian Ocean and lie within Australia's marine jurisdiction. Heard Island and McDonald Islands (HIMI) are surrounded by an Exclusive Economic Zone extending 200 nautical miles from their coasts and much of the Kerguelen Plateau south of Heard Island has been recognised as Australian Extended Continental Shelf by the UN Commission for the Legal Continental Shelf. The area is currently targeted by fishers licensed under the Convention on the Conservation of Antarctic Marine Living Resources (CCAMLR). The purpose of the bathymetry grid is to improve the geomorphic detail of seafloor features, including submarine volcanic hills on the top of the Kerguelen Plateau and a complex of submarine channels draining the southern flank of northern plateau. Australian Hydrographic Office-supplied single beam echo sounder bathymetry data were used to develop the general depth variation across the Kerguelen Plateau and adjacent Williams Ridge extending to the south-east of the central plateau. Deep-water multibeam bathymetry data reveal the complexity of the seafloor on Kerguelen Plateau and the surrounding abyssal plains and basins. These multibeam surveys were conducted both as systematic surveys by Research Vessel (RV) Investigator and Sonne over Williams Ridge. Other multibeam data were obtained from transit voyages that crossed through the Kerguelen Plateau and Williams Ridge area. SHOM-supplied combined multibeam and single beam data were collected around the French EEZ and approaches to Kerguelen Island, which is French territory. Austral Fisheries provided extensive crowdsourced bathymetry (CSB) data from their various blue-water fishing vessels using single beam echo sounders. These fishing vessels operate within the Kerguelen Plateau and Williams Ridge region under licence from the Australian Fisheries Management Authority. Austral Fisheries CSB date were provided to the Australian Antarctic Division (AAD) for restricted use in this project. All source multibeam and single beam bathymetry data were extensively edited as 3D point clouds to remove obvious anomalous noise, and given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum prior to the grid interpolation process.

This resource contains surface sediment data for Bynoe Harbour collected by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and Department of Land Resource Management (Northern Territory Government) during the period from 2-29 May 2016 on the RV Solander (survey SOL6432/GA4452). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Land Resource Management, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. The specific objectives of the survey were to: 1. Obtain high resolution geophysical (bathymetry) data for outer Darwin Harbour, including Shoal Bay; 2. Characterise substrates (acoustic backscatter properties, grainsize, sediment chemistry) for outer Darwin Harbour, including Shoal Bay; and 3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, underwater photography and video of grab sample locations and oceanographic information including tidal data and sound velocity profiles. This dataset comprises total sediment metabolism, carbonate and element concentrations and C and N isotopes measurements made on seabed sediments. A detailed account of the survey is provided in Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas W.A., Picard, K., Radke, L.C., Tran, M., Williams, D. and Whiteway, T., 2016. Bynoe Harbour Marine Survey 2017: GA4452/SOL6432 – Post-survey report. Record 2017/04. Geoscience Australia, Canberra. Thanks to the crew of the RV Solander for help with sample collection, Matt Carey, Craig Wintle and Andrew Hislop from the Observatories and Science Support at Geoscience Australia for technical support and Jodie Smith for reviewing the data. This dataset is published with the permission of the CEO, Geoscience Australia.

A benthic sediment sampling survey (GA0356) to the nearshore areas of outer Darwin Harbour was undertaken in the period from 03 July to 14 September 2016. Partners involved in the survey included Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Department of Environment and Natural Resources within the Northern Territory Government (NT DENR) (formerly the Department of Land and Resource Management (DLRM)). This survey forms part of a four year (2014-2018) science program aimed at improving knowledge about the marine environments in the regions around Darwin and Bynoe Harbour’s through the collection and collation of baseline data that will enable the creation of thematic habitat maps to underpin marine resource management decisions. This project is being led by the Northern Territory Government and is supported by the INPEX-led Ichthys LNG Project, in collaboration with - and co-investment from GA and AIMS. The program builds upon an NT Government project (2011-2011) which saw the collection of baseline data (multibeam echosounder data, sediment samples and video transects) from inner Darwin Harbour (Siwabessy et al. 2015). This dataset comprises sediment oxygen demand measurements on seabed sediments. Radke, L., Smit, N., Li, J., Nicholas, T., Picard, K. 2017. Outer Darwin Harbour Shallow Water Sediment Survey 2016: GA0356 – Post-survey report. Record 2017/06. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2017.006 This research was funded by the INPEX-led Ichthys LNG Project via the Northern Territory (NT) Government Department of Land Resource Management (DLRM) (now the Department of Environment and Natural Resources (DENR)), and co-investment from Geoscience Australia (GA) and Australian Institute of Marine Science (AIMS). We are grateful to the following agencies for providing boats and staff, and to the following personal for help with sample acquisition: NT DENR (Danny Low Choy and Rachel Groome), NT Fisheries (Wayne Baldwin, Quentin Allsop, Shane Penny, Chris Errily, Sean Fitzpatrick and Mark Grubert), NT Parks and Wildlife (Ray Chatto, Stewart Weorle, and Luke McLaren) and the Larrakia Rangers (Nelson Tinoco, Kyle Lewfat, Alan Mummery and Steven Dawson). Special thanks to the skippers Danny Low Choy, Wayne Baldwin, Stewart Weorle and Luke McLaren whose seamanship strongly guided the execution of this survey. AIMS generously allowed use of the aquarium and laboratory at the Arafura Timor Sea Research Facility, and Simon Harries and Kirsty McAllister helped with the setup. We would also like to acknowledge and thank GA colleagues including: Matt Carey, Ian Atkinson and Craig Wintle (Engineering and Applied Scientific Services) for the organisation of field supplies and the design of the new core incubation set-up. This dataset is published with the permission of the CEO, Geoscience Australia

A benthic sediment sampling survey (GA0356) to the nearshore areas of outer Darwin Harbour was undertaken in the period from 03 July to 14 September 2016. Partners involved in the survey included Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Department of Environment and Natural Resources within the Northern Territory Government (NT DENR) (formerly the Department of Land and Resource Management (DLRM)). This survey forms part of a four year (2014-2018) science program aimed at improving knowledge about the marine environments in the regions around Darwin and Bynoe Harbour’s through the collection and collation of baseline data that will enable the creation of thematic habitat maps to underpin marine resource management decisions. This project is being led by the Northern Territory Government and is supported by the INPEX-led Ichthys LNG Project, in collaboration with - and co-investment from GA and AIMS. The program builds upon an NT Government project (2011-2011) which saw the collection of baseline data (multibeam echosounder data, sediment samples and video transects) from inner Darwin Harbour. This dataset comprises total oxygen uptake and total carbon dioxide flux measurements from core incubation experiments on seabed sediments. Radke, L., Smit, N., Li, J., Nicholas, T., Picard, K. 2017. Outer Darwin Harbour Shallow Water Sediment Survey 2016: GA0356 – Post-survey report. Record 2017/06. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2017.006 This research was funded by the INPEX-led Ichthys LNG Project via the Northern Territory (NT) Government Department of Land Resource Management (DLRM) (now the Department of Environment and Natural Resources (DENR)), and co-investment from Geoscience Australia (GA) and Australian Institute of Marine Science (AIMS). We are grateful to the following agencies for providing boats and staff, and to the following personal for help with sample acquisition: NT DENR (Danny Low Choy and Rachel Groome), NT Fisheries (Wayne Baldwin, Quentin Allsop, Shane Penny, Chris Errily, Sean Fitzpatrick and Mark Grubert), NT Parks and Wildlife (Ray Chatto, Stewart Weorle, and Luke McLaren) and the Larrakia Rangers (Nelson Tinoco, Kyle Lewfat, Alan Mummery and Steven Dawson). Special thanks to the skippers Danny Low Choy, Wayne Baldwin, Stewart Weorle and Luke McLaren whose seamanship strongly guided the execution of this survey. AIMS generously allowed use of the aquarium and laboratory at the Arafura Timor Sea Research Facility, and Simon Harries and Kirsty McAllister helped with the setup. We would also like to acknowledge and thank GA colleagues including: Matt Carey, Ian Atkinson and Craig Wintle (Engineering and Applied Scientific Services) for the organisation of field supplies and the design of the new core incubation set-up. This dataset is published with the permission of the CEO, Geoscience Australia

This dataset contains a bathymetry (depth) grid of the Williams Ridge region, southeast Indian Ocean, at 100 metre resolution produced from the compilation of all available source data. These data include single beam echo sounder bathymetry data supplied by the Australian Hydrographic Office to generate the general depth model, and deep-water multibeam bathymetry data to reveal the complexity of the seafloor on Williams Ridge, Kerguelen Plateau and the surrounding abyssal plains and basins. Multibeam bathymetry data were collected during systematic surveys over Williams Ridge by Research Vessel (RV) Investigator in 2020 and RV Sonne, and on vessel transits that crossed through the region. The RV Investigator survey also collected seismic, magnetic and gravity data, and rock samples to provide new knowledge of the geological and tectonic evolution of the region (see www.mnf.csiro.au/en/voyages/IN2020_V01). Austral Fisheries also provided crowdsourced bathymetry (CSB) data from fishing vessels collected using single beam echo sounders. These fishing vessels operate within the Kerguelen Plateau and Williams Ridge region licenced under the Conservation of Antarctic Marine Living Resources. Austral Fisheries CSB data were provided to the Australian Antarctic Division for restricted use in this compilation product. All source multibeam and single beam bathymetry data were edited as 3D point clouds to remove anomalous noise, and given a consistent WGS84 horizontal datum, and where possible, an approximate MSL vertical datum prior to the grid interpolation process. This dataset was developed to support the management of Australia’s marine jurisdiction and is published with permission of the CEO, Geoscience Australia. This dataset is not to be used for navigational purposes