This map is part of a series which comprises 50 maps which covers the whole of Australia at a scale of 1:1 000 000 (1cm on a map represents 10km on the ground). Each standard map covers an area of 6 degrees longitude by 4 degrees latitude or about 590 kilometres east to west and about 440 kilometres from north to south. These maps depict natural and constructed features including transport infrastructure (roads, railway airports), hydrography, contours, hypsometric and bathymetric layers, localities and some administrative boundaries, making this a useful general reference map.

The 3 second (~90m) Smoothed Digital Elevation Model (DEM-S) Version 1.0 was derived from resampling the 1 second SRTM derived DEM-S (gridded smoothed digital elevation model; ANZCW0703014016). The DEM represents ground surface topography, excluding vegetation features, and has been smoothed to reduce noise and improve the representation of surface shape. The DEM-S was derived from the 1 second Digital Surface Model (DSM; ANZCW0703013336) and the Digital Elevation Model Version 1.0 (DEM; ANZCW0703013355) by an adaptive smoothing process that applies more smoothing in flatter areas than hilly areas, and more smoothing in noisier areas than in less noisy areas. This DEM-S supports calculation of local terrain shape attributes such as slope, aspect and curvatures that could not be reliably derived from the unsmoothed 1 second DEM because of noise. A full description of the methods is in progress (Gallant et al., in prep) and in the 1 second User Guide. The 3 second DEM was produced for use by government and the public under Creative Commons attribution. The 1 second DSM and DEM that forms the basis of the product are also available as 3 second products (DSM; ANZCW0703014216, DEM; ANZCW0703014182, DEM-S; ANZCW0703014217). <strong>Please note that all 1 second products are available for GOVERNMENT USERS ONLY.</strong>

These datasets cover approximately 970 sq km in the central north sector of the Burdekin Regional Council and are part of the 2009 North Queensland LiDAR capture project. This project, undertaken by Photomapping Services on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in shapefile format - 0.25 metre contours in ESRI Shape

Redland 2009 LiDAR survey was captured over the Redland City Council region between 25th March and 9th June 2009. The data was acquired by AAM Hatch (now AAMGroup) and funded by Queensland and Commonwealth governments. The data is licensed for use by all Commonwealth, State and Local Government. Data acquisition and post-processing has been controlled to achieve a vertical accuracy within 0.15m (RMS, 68% CI) and horizontal accuracy within 0.45 m. Horizontal coordinates are based upon Map Grid of Australia (MGA) Zone 56 projection. Vertical coordinates are referenced to Australian Height Datum (AHD). The data was captured with point density of 2.5 points per square metre and the data is available as mass point files (ASCII, LAS) and ESRI GRID files with 1m grid spacing in 1km tiles. The data are available as a number of surface types, products and formats including: mass points, digital elevation model (DEM) and hydrologically enforced DEM (HDEM) for the low lying coastal areas. Redland DEM forms part of the Brisbane HDEM which is a combination of the Brisbane 2009 LiDAR, Redland 2009 LiDAR, Moreton Bay 2009 LiDAR and Logan 2009 LiDAR survey areas.

At this scale 1cm on the map represents 1km on the ground. Each map covers a minimum area of 0.5 degrees longitude by 0.5 degrees latitude or about 54 kilometres by 54 kilometres. The contour interval is 20 metres.

At this scale 1cm on the map represents 1km on the ground. Each map covers a minimum area of 0.5 degrees longitude by 0.5 degrees latitude or about 54 kilometres by 54 kilometres. The contour interval is 20 metres.

At this scale 1cm on the map represents 1km on the ground. Each map covers a minimum area of 0.5 degrees longitude by 0.5 degrees latitude or about 54 kilometres by 54 kilometres. The contour interval is 20 metres.

<p><b>Please note: </b>This topographic map is not available from Geoscience Australia.<p>For availability, refer to NSW Government mapping agency.

<p><b>Please note: </b>This topographic map is not available from Geoscience Australia.<p>For availability, refer to NSW Government mapping agency.

At this scale 1cm on the map represents 1km on the ground. Each map covers a minimum area of 0.5 degrees longitude by 0.5 degrees latitude or about 54 kilometres by 54 kilometres. The contour interval is 20 metres.