This record contains processed and topographically corrected Ground Penetrating Radar (GPR) data (.segy, .bmps) and summary shapefile collected on fieldwork at Old Bar Beach, NSW for the Bushfire and Natural Hazards CRC Project, Resilience to Clustered Disaster Events on the Coast - Storm Surge. The data was collected from 3 - 5 March 2015 using a MALA ProEx GPR system with a 250 MHz shielded antennae. The aim of the field work was to identify and define a minimum thickness for the beach and dune systems, and where possible depth to any identifiable competent substrate (e.g. bedrock) or pre-Holocene surface which may influence the erosion potential of incident wave energy. Surface elevation data was co-acquired and used to topographically correct the GPR profiles. This dataset is published with the permission of the CEO, Geoscience Australia.

Data collected from the Australian Regional Global Navigation Satellite System (GNSS) network, AuScope network and other GNSS observatories located around the world over the last 15 years.

The annual Asia Pacific Regional Geodetic Project (APRGP) GPS campaign is an activity of the Geodetic Reference Frame Working Group (WG) of the Regional Committee of United Nations Global Geospatial Information Management for Asia and the Pacific (UN-GGIM-AP). This document describes the data analysis of the APRGP GPS campaign undertaken between the 16th and 22nd of September 2018. Campaign GPS data collected at 101 sites in ten countries across the Asia Pacific region were processed using version 5.2 of the Bernese GNSS Software in a regional network together with selected IGS (International GNSS Service) sites. The GPS solution was constrained to the ITRF2014 reference frame by adopting IGS14 coordinates on selected IGS reference sites and using the final IGS earth orientation parameters and satellite ephemerides products. The average of the root mean square repeatability of the station coordinates for the campaign was 1.8 mm, 1.6 mm and 5.4 mm in north, east and up components of station position respectively.

The national measurement system in Australia ensures a basis for legally traceable, consistent and internationally recognised measurements. With the growing societal dependency on GPS, the need for the legal traceability of GPS positions with respect to the Australian Datum - the Geocentric Datum of Australia 1994 (GDA94) -- has become increasingly apparent. In the interest of ensuring consistency of positions derived from private and government Continuously Operating Reference Stations (CORS),Geoscience Australia maintains an appointment as a legal metrology authority in accordance with the National Measurement Act 1960 and provides legally traceable positions. This presentation will overview Geoscience Australia's approach to the legal traceability of GPS positions, the process of legal certification including: (1) the basic requirements for requesting certification; (2) quality standards and the quality management system of the position verification processes. The structured maintenance and continual improvement program for the verifying laboratory will also be introduced.

The Print Service provides PDF map prints via an online interface. This service prints detailed PDF maps, including scale bar and marginalia.

The annual Asia Pacific Regional Geodetic Project (APRGP) GPS campaign is an activity of the Geodetic Reference Frame Working Group (WG) of the Regional Committee of United Nations Global Geospatial Information Management for Asia and the Pacific (UN-GGIM-AP). This document describes the data analysis of the APRGP GPS campaign undertaken between the 15th and 22nd of September 2019. Campaign GPS data collected at 101 sites in ten countries across the Asia Pacific region were processed using version 5.2 of the Bernese GNSS Software in a regional network together with selected IGS (International GNSS Service) sites. The GPS solution was constrained to the ITRF2014 reference frame by adopting IGS14 coordinates on selected IGS reference sites and using the final IGS earth orientation parameters and satellite ephemerides products. The average of the root mean square repeatability of the station coordinates for the campaign was 1.8 mm, 1.6 mm and 5.4 mm in north, east and up components of station position respectively.

This collection includes Global Navigation Satellite System (GNSS) observations from short-term occupations at multiple locations across Australia and its external territories, including the Australian Antarctic Territory. <b>Value: </b> The datasets within this collection are available to support a myriad of scientific applications, including research into the crustal deformation of the Australian continent. <b>Scope: </b> Data from selected areas of interest across Australia and its external territories, including the Australian Antarctic Territory. Over time there has been a focus on areas with increased risk of seismic activity or areas with observed natural or anthropogenic deformation. <b>Access: </b> The datasets within this collection are currently stored offline, to access please send a request to gnss@ga.gov.au

This collection includes Global Navigation Satellite System (GNSS) observations from long-term continuous or semi continuous reference stations at multiple locations across Australia and its external territories, including the Australian Antarctic Territory. <b>Value:</b> The datasets within this collection are provided on an openly accessible basis to support a myriad of scientific and societal positioning applications in Australia. These include the development and maintenance of the Australian Geospatial Reference System (AGRS); the densification of the International Terrestrial Reference Frame (ITRF); crustal deformation studies; atmospheric studies; and the delivery of precise positioning services to Australian businesses. <b>Scope: </b> Data from reference stations across Australia and its external territories, including the Australian Antarctica Territory. <b>Access: </b> To access the datasets and query station information visit the <a href="https://gnss.ga.gov.au./">Global Navigation Satellite System Data Centre</a>

The Clip and Zip tool takes an input polygon extent as WKT input and clips required featureclasses listed. The data is referenced from its own database with all layers projected to 4326 spatial reference. The output is a zipped file geodatabase with a copyright text file included.

The Identify_Tool service includes the key set of infrastructure layers included in the LeastCostPath and ClipAndZip geoprocessing tools. The indentify query uses a dynamic tolerance and returns features including geometry as JSON.