The Cooper Basin is a Pennsylvanian to Middle Triassic intracratonic basin in northeastern South Australia and southwestern Queensland (Gravestock et al., 1998; Draper, 2002). Exploration activity in the region has recently expanded with explorers pursuing a range of newly-identified unconventional hydrocarbon plays (Goldstein et al., 2012; Menpes et al., 2013; Greenstreet, 2015; Carr et al., 2016). In support of this on-going exploration activity, Hall et al. (2015a) presented a regional overview of the architecture, tectonic evolution and lithostratigraphy of the Cooper Basin. This data pack contains the supplementary material accompanying this report. Structural architecture, extent and thickness of key stratigraphic units were characterised through construction of a regional 3D geological model, designed to capture the groups and formations associated with the major play types in the basin (Hall et al., 2015a). Existing published Cooper Basin horizons (DMITRE, 2001, 2009; NGMA, 2001) were integrated with stratigraphic tops (DNRM, 2015; DSD, 2015) and new seismic data interpretations, ensuring seamless integration of datasets across the state border. Isopachs extracted from the 3D model were used to review the extent and true vertical thickness of each stratigraphic unit. The Permian Toolachee and Patchawarra formations in Queensland are shown to have a wider extent compared with previous studies. The boundaries of the Roseneath and Murteree shales were revised, although their distribution still remains uncertain in areas such as the Arrabury Depression. Lithofacies analysis published for South Australia (Sun & Camac, 2004) were integrated with new stratigraphic analysis in the Weena Trough (Morton, 2016) and new electrofacies mapping in Queensland to produce the first basin wide set of lithofacies maps for the Toolachee, Daralingie, Epsilon and Patchawarra formations (Hall et al., 2015a). The resulting net sandstone, siltstone, shale and coal thickness maps characterise the regional distribution of key source, reservoir and seal units across the basin. Maps of net coal and shale thickness demonstrate an abundance of potential source rock facies in the Toolachee and Patchawarra formations in all regions. Additional potential source rock facies can be found in the Roseneath and Murteree shales, as well as in coals and shales of the Daralingie and Epsilon formations. Net sandstone thickness maps highlight possible regional reservoir facies distribution. The model is designed to characterise the formations associated with the basin's key petroleum systems elements, providing a framework for regional scale petroleum systems analysis and resource assessment studies (Hall et al., 2015b; Kuske et al., 2015). While this work provides important insights into both the conventional and unconventional hydrocarbon prospectivity of the basin, it also has application for the assessment of other resources such as groundwater (e.g. Smith et al., 2015a, b, c).

The Cooper Basin is an upper Carboniferous to Middle Triassic intracratonic basin in northeastern South Australia and southwestern Queensland (Gravestock et al., 1998; Draper, 2002; Carr et al., 2016). The basin is Australia's premier onshore hydrocarbon producing province and is nationally significant in providing gas to the eastern Australian gas market. The basin also hosts a range of unconventional gas play types within the Permian Gidgealpa Group, including basin-centred gas and tight gas accumulations, deep dry coal gas associated with the Patchawarra and Toolachee formations, the Murteree and Roseneath shale gas plays and deep coal seam gas in the Weena Trough (e.g. Goldstein et al., 2012; Menpes et al., 2013; Greenstreet, 2015). The principal source rocks for these plays are the Permian coals and coaly shales of the Gidgealpa Group (Boreham & Hill, 1998; Deighton & Hill, 1998; Deighton et al., 2003). Hall et al. (2016a) reviews the maturity and generation potential of the Cooper Basin source rocks and is the third part of a series of reports reviewing various aspects of the hydrocarbon prospectivity of the Cooper Basin (see also Hall et al., 2015a; Hall et al., 2016a). This data pack contains the supplementary material accompanying this report. Over ninety 1D thermal and burial history models were integrated with the 3D basin model and source rock property characteristics to create a regional multi-1D petroleum systems model for the basin. The burial and thermal history of the model was calibrated using present day corrected temperatures and maturity indicators (Ro, Tmax). In addition lithologies for key wells were calibrated using velocity, density and thermal conductivity data. Thermal boundary conditions were modelled as transient heat-flow from base lithosphere. Crustal thickness and radiogenic heat production properties were used from published studies (e.g. Beardsmore, 2004; Meixner et al., 2012; Hall et al. 2015a). The 1D models are integrated with a 3D regional basin model (Hall et al., 2015a) to create a multi-1D petroleum systems model of the Cooper Basin. Parameters for source rock distribution, amount and quality were added from analysis of log data and source rock geochemical data (Hall et al., 2016a) and new Cooper Basin kinetics (Mahlstedt et al., 2015). This data pack includes the following grids for each source rock: temperature (°C), maturity (%Ro), transformation ratio (%), total hydrocarbon generation (mmboe/km2), oil expelled (mmbbl/km2), gas expelled (mmboe/km2; bcf/km2), oil retained (mmbbl/km2) and gas retailed (mmboe/km2; bcf/km2). The results quantify both the maturity and total maximum hydrocarbon yield of each source rock, providing important insights into the hydrocarbon prospectivity of the basin (Hall et al., 2015b; Kuske et al., 2015).

Publicly available geology data are compiled to provide a common information base for resource development, environmental and regulatory decisions in the Cooper Basin region. This data guide gives examples of how these data can be used and supports the data package that provides the existing knowledge of the key geological intervals of the Cooper Basin and the overlying Eromanga and Lake Eyre basins. The key geological intervals identified by the Trusted Environmental and Geological Information (TEGI) Program for resource assessment and groundwater system characterisation are termed play intervals and hydrostratigraphic intervals respectively. The Cooper Basin includes 7 plays, which are consolidated into 1 hydrostratigraphic interval. Overlying the Cooper Basin are 9 play intervals of the Eromanga Basin, which are consolidated into 7 hydrostratigraphic intervals and 1 Cenozoic play interval and 1 hydrostratigraphic interval for the Lake Eyre Basin. The geological groups and formations included in the play and hydrostratigraphic intervals are summarised in the stratigraphic charts of Wainman et al. (2023). Gross depositional, depth structure and thickness maps are provided with 3D model and cross-sections summarising the geology of the Cooper Basin and the overlying basins. The mapped depths and thicknesses of the key intervals are used to inform resource assessments and provide the framework for assigning groundwater data to hydrostratigraphic intervals.

Publicly available baseline surface water data are compiled to provide a common information base for resource development and regulatory decisions in the Cooper Basin region. This data guide captures existing knowledge of the catchments and watercourses overlying the Cooper Basin, including streamflow quality and quantity, inundation, and climatological data. The Cooper Basin underlies 3 surface water catchments: the Diamantina River, Cooper Creek and Bulloo River. All 3 rivers follow a similar flow pattern, with most of the run-off generated in the higher rainfall headwater areas (outside the Cooper Basin) before flowing down into extensive floodplains and ending up in terminal lake systems. The data on the catchments overlying the Cooper Basin have been summarised at a point in time to inform decisions on resource development activities. Key data sources are the Water Monitoring Information Portal (Queensland Government), Water Data Online (Bureau of Meteorology), DEA Water Observations (Geoscience Australia) and Terrestrial Ecosystem Research Network.

This seminar will showcase new results from the late Carboniferous to Middle Triassic Cooper Basin that challenge existing notions on its evolution, new insights on sediment dispersal pathways and consequently its resource potential. Topics that will be explored include how the Cooper Basin is similar to other failed rift basins and how depositional facies between each of the half-grabens/troughs are influenced by the relationship between sediment supply and the rate of creation of accommodation. Of note are new precise dates and carbon isotope data from the thick coals of the Patchawarra Formation suggesting prolonged and uninterrupted peat accumulation for millions of years during the latter stages of the late Palaeozoic ice age – no modern analogue exists to compare the conditions and longevity of these ancient mires. Come along to the talk to learn more about the Cooper Basin.

Publicly available data was compiled to provide a common information base for resource development, and environmental and regulatory decisions in the Cooper Basin. This web service summarises the geological storage of carbon dioxide prospectivity of the Cooper Basin.

Publicly available groundwater data have been compiled to provide a common information base to inform environmental, resource development and regulatory decisions in the Cooper Basin region. This web service summarises salinity, water levels, resource size, potential aquifer yield and surface water–groundwater interactions for the Lake Eyre Basin located within the Cooper Basin region.

Publicly available data was compiled to provide a common information base for resource development, and environmental and regulatory decisions in the Cooper Basin. This web service summarises the geological storage of carbon dioxide prospectivity of the Cooper Basin.

Geoscience Australia commissioned reprocessing of selected legacy 2D seismic data in the Pedirka-Simpson Basin in South Australia-Northern Territory as part of the Exploring for the Future (EFTF) program. 34 Legacy 2D seismic lines from the Pedirka Basin were reprocessed between May 2021 and January 2022 (phase 1). An additional 54 legacy 2D seismic lines (34 lines from Pedirka Basin, South Australia and 20 lines from Simpson Basin, Northern Territory) were reprocessed between November 2021 and June 2022 (phase 2). Geofizyka Toruń S.A. based in Poland carried out the data processing and Geoscience Australia with the help of an external contractor undertook the quality control of the data processing. The seismic data release package contains reprocessed seismic data acquired between 1974 and 2008. In total, the package contains approximately 3,806.9 km of industry 2D reflection seismic data. The seismic surveys include the Beal Hill, 1974; Pilan Hill, 1976; Koomarinna, 1980; Christmas Creek, 1982; Hogarth, 1984; Morphett, 1984; Colson 2D, 1985; Etingimbra, 1985; Fletcher, 1986; Anacoora, 1987; Mitchell, 1987; Bejah, 1987; Simpson Desert, 1979, 1984, 1986, 1987; Forrest, 1988; Eringa Trough, 1994; Amadeus-Pedirka, 2008 and covers areas within the Amadeus Basin, Simpson Basin, Pedirka Basin, Warburton Basin and Cooper Basin in South Australia and Northern Territory. The objective of the seismic reprocessing was to produce a processed 2D land seismic reflection dataset using the latest processing techniques to improve resolution and data quality over legacy processing. In particular, the purpose of the reprocessing was to image the structure and stratigraphic architecture of the Neoproterozoic to Late Palaeozoic Amadeus Basin, Triassic Simpson Basin, Cambrian–Devonian Warburton Basin, Permian–Triassic Pedirka Basin and Cooper Basin. All vintages were processed to DMO stack, Pre-stack Time Migration and Post-Stack Time Migration. <b>Data is available on request from clientservices@ga.gov.au - Quote eCat# 146309</b>

The Australian Government’s $225 million Exploring for the Future (EFTF) program is committed to supporting a strong economy, resilient society and sustainable environment for the benefit of Australians (https://www.ga.gov.au/eftf). At its heart, the program is about stimulating industry now to ensure a sustainable, long-term future for Australia through an improved understanding of the nation’s minerals, energy and groundwater resource potential. By gathering and analysing geological and geophysical data and making the results publicly available, the program supports regional development and informed decision making across Australia, resulting in jobs and growth. The Energy component of this program is designed to produce pre-competitive information to assist with the evaluation of the hydrocarbon resource potential of onshore basins and attract exploration investment to Australia. As part of the EFTF Natural Hydrogen module, molecular and isotopic analyses were undertaken by Geoscience Australia on natural gas samples from the wells Canunda 2 and Ralgnal 1 from the southwestern margin of the Patchawarra Trough in the Cooper Basin, with the raw data from these analyses being released in this report. Some data from these wells were included in the nationwide studies of helium and hydrogen, as published by Boreham et al. (2018; 2021), and build on previous studies that document the composition of Australian natural gases (Boreham et al., 2001). These data are available through the Geoscience Australia portal at https://portal.ga.gov.au/