Long-period magnetotelluric (MT) data allow geoscientists to investigate the link between mineralisation and lithospheric-scale features and processes. In particular, the highly conductive structures imaged by MT data appear to map the pathways of large-scale palaeo-fluid migration, the identification of which is an important element of several mineral system models. Given the importance of these data, governments and academia have united under the Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP) to collect long-period MT data across the continent on a ~55 km-spaced grid. Here, we use AusLAMP data to demonstrate the MT method as a regional-scale tool to identify and select prospective areas for mineral exploration undercover. We focus on the region between Tennant Creek in the Northern Territory and east of Mount Isa in Queensland. Our results image major conductive structures up to 150 km deep in the lithosphere, such as the Carpentaria Conductivity Anomaly east of Mount Isa. This anomaly is a significant lithospheric-scale conductivity structure that shows spatial correlations with a major suture zone and known iron oxide–copper–gold deposits. Our results also identify similar features in several under-explored areas that are now considered to be prospective for mineral discovery. These observations provide a powerful means of selecting frontier regions for mineral exploration undercover.. <b>Citation:</b> Duan, J., Kyi, D., Jiang, W. and Costelloe, M., 2020. AusLAMP: imaging the Australian lithosphere for resource potential, an example from northern Australia. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

<p>This dataset contains magnetotelluric data and a 3D inversion model from the 09GA-GA1 deep magnetotelluric transect, collected in Central Australia in 2009. The transect is 350 km long, with data acquired from 18 stations with both broadband and long period instrumentation, and 21 stations with broadband instrumentation only (a total of 39 sites). The resulting station spacing is 10km for the broadband stations, and 20km for stations with both broadband and long period instrumentation. We have reprocessed the broadband data using the Bounded Influence, Remote Reference Processing software (BIRRP), yielding an extended bandwidth of 0.003 to 1300 s and merged these data with the long period data. We have inverted the data using the ModEM 3D inversion code. <p>More details on the data processing, analysis, modelling, and interpretation can be found in the following paper: Kirkby, A. and Duan, J., 2019. Crustal Structure of the Eastern Arunta Region, Central Australia, From Magnetotelluric, Seismic, and Magnetic Data. Journal of Geophysical Research: Solid Earth, 124. <a href="https://doi.org/10.1029/2018JB016223">https://doi.org/10.1029/2018JB016223</a>

We present a 3‐D inversion of magnetotelluric data acquired along a 340‐km transect in Central Australia. The results are interpreted with a coincident deep crustal seismic reflection survey and magnetic inversion. The profile crosses three Paleoproterozoic to Mesoproterozoic basement provinces, the Davenport, Aileron, and Warumpi Provinces, which are overlain by remnants of the Neoproterozoic to Cambrian Centralian Surperbasin, the Georgina and Amadeus Basins, and the Irindina Province. The inversion shows conductors near the base of the Irindina Province that connect to moderately conductive pathways from 50‐km depth and to off‐profile conductors at shallower depths. The shallow conductors may reflect anisotropic resistivity and are interpreted as sulfide minerals in fractures and faults near the base of the Irindina Province. Beneath the Amadeus Basin, and in the Aileron Province, there are two conductors associated strong magnetic susceptibilities from inversions, suggesting they are caused by magnetic, conductive minerals such as magnetite or pyrrhotite. Beneath the Davenport Province, the inversion images a conductive layer from ∼15‐ to 40‐km depth that is associated with elevated magnetic susceptibility and high seismic reflectivity. The margins between the different basement provinces from previous seismic interpretations are evident in the resistivity model. The positioning and geometry of the southern margin of the crustal conductor beneath the Davenport Province supports the positioning of the south dipping Atuckera Fault as interpreted on the seismic data. Likewise, the interpreted north dipping margin between the Warumpi and Aileron Province is imaged as a transition from resistive to conductive crust, with a steeply north dipping geometry.

The magnetotelluric (MT) method is increasingly being applied to map tectonic architecture and mineral systems. Under the Exploring for the Future (EFTF) program, Geoscience Australia has invested significantly in the collection of new MT data. The science outputs from these data are underpinned by an open-source data analysis and visualisation software package called MTPy. MTPy started at the University of Adelaide as a means to share academic code among the MT community. Under EFTF, we have applied software engineering best practices to the code base, including adding automated documentation and unit testing, code refactoring, workshop tutorial materials and detailed installation instructions. New functionality has been developed, targeted to support EFTF-related products, and includes data analysis and visualisation. Significant development has focused on modules to work with 3D MT inversions, including capability to export to commonly used software such as Gocad and ArcGIS. This export capability has been particularly important in supporting integration of resistivity models with other EFTF datasets. The increased functionality, and improvements to code quality and usability, have directly supported the EFTF program and assisted with uptake of MTPy among the international MT community. <b>Citation:</b> Kirkby, A.L., Zhang, F., Peacock, J., Hassan, R. and Duan, J., 2020. Development of the open-source MTPy package for magnetotelluric data analysis and visualisation. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

We present a resistivity model of the southern Tasmanides of southeastern Australia using Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP) data. Modelled lower crustal conductivity anomalies resemble concentric geometries revealed in the upper crust by potential field and passive seismic data. These geometries are a key part of the crustal architecture predicted by the Lachlan Orocline model for the evolution of the southern Tasmanides, in which the Proterozoic Selwyn Block drives oroclinal rotation against the eastern Gondwana margin during the Silurian period. For the first time, we image these structures in three dimensions (3D) and show they persist below the Moho. These include a lower crustal conductor largely following the northern Selwyn Block margin. Spatial association between lower crustal conductors and both Paleozoic to Cenozoic mafic to intermediate alkaline volcanism and gold deposits suggests a genetic association i.e. fluid flow into the lower crust resulting in the deposition of conductive phases such as hydrogen, iron, sulphides and/or graphite. The 3D model resolves a different pattern of conductors in the lithospheric mantle, including northeast trending anomalies in the northern part of the model. Three of these conductors correspond to Cenozoic leucitite volcanoes along the Cosgrove mantle hotspot track which likely map the metasomatised mantle source region of these volcanoes. The northeasterly alignment of the conductors correlates with variations in the lithosphere-asthenosphere boundary (LAB) and the direction of Australian plate movement, and may be related to movement of an irregular LAB topography over the asthenosphere. By revealing the tectonic architecture of a Phanerozoic orogen and the overprint of more recent tectono-magmatic events, our resistivity model enhances our understanding of the lithospheric architecture and geodynamic processes in southeast Australia, demonstrating the ability of magnetotelluric data to image geological processes over time.

The magnetotelluric (MT) method is increasingly being applied to a wide variety of geoscience problems. However, the software available for MT data analysis and interpretation is still very limited in comparison to many of the more mature geophysical methods such as the gravity, magnetic or seismic reflection methods. MTPy is an open source Python package to assist with MT data processing, analysis, modelling, visualization and interpretation. It was initiated at the University of Adelaide in 2013 as a means to store and share Python code amongst the MT community (Krieger and Peacock 2014). Here we provide an overview of the software and describe recent developments to MTPy. These include new functionality and a clean up and standardisation of the source code, as well as the addition of an integrated testing suite, documentation, and examples in order to facilitate the use of MT in the wider geophysics community.

Broadband and audio magnetotelluric (BBMT and AMT) data at 476 sites on a 2 Km grid were acquired in the Cloncurry region between July and November 2016. The survey covered an area of appriximatly 40 km x 60 km on the eastern margin of the Mount Isa Province. The Cloncurry magnetotelluric (MT) project was funded by the Geological Survey of Queensland and is a collaborative project between the Geological Survey of Queensland and Geoscience Australia. Geoscience Australia managed the project and peformed data QA/QC, data analysis, and produced two-dimensional (2D) and three dimensional (3D) inverse models for both the BBMT and AMT data. This report details the field acquisition program and the methodologies used for processing, analysing, modelling and inverting the data.

Geoscience Australia has undertaken a series of integrated studies to identify prospective regions of mineral potential using new geological, geophysical and geochemical data from the Exploring for the Future (EFTF) program, together with legacy datasets. The Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP) is a collaborative national survey, which aims to acquire long-period magnetotelluric (MT) data on a half-degree grid spacing (~55 km) across the entire Australian continent. The resistivity model derived from the newly-acquired AusLAMP data has mapped deep lithospheric-scale conductivity anomalies in highly endowed mineralised regions and in greenfield regions where mineralisation was not previously recognised. For example, the model reveals a conductivity anomaly extending from the Tennant Region to the Murphy Province, representing a potential fertile source region for mineral systems. This conductive feature coincides with a broadly northeast-southwest-trending corridor marked by a series of large-scale structures identified from preliminary interpretation of seismic reflection and potential field data. This under-explored region, referred to as East Tennant, is, therefore, considered to have significant mineral potential. We undertook a higher-resolution magnetotellurics survey to investigate if the deep conductivity anomaly is linked to the near surface by crustal-scale fluid pathways. Broadband MT (BBMT) and audio-MT (AMT) data were acquired at 131 stations with station spacing of ~2 km to ~15 km in an area of approximately 90 km x 100 km. The 3D resistivity model revealed two prominent conductors in the resistive host whose combined responses result in the lithospheric-scale conductivity anomaly mapped in the AusLAMP model. The resistivity contrasts coincide with major structures preliminarily interpreted from seismic reflection and potential field data. Most importantly, the conductive structures extend from the lower crust to the near surface. This observation strongly suggests that the major faults in this region are deep-penetrating structures that potentially acted as pathways for transporting metalliferous fluids to the upper crust where they could form mineral deposits. This result indicates high mineral prospectivity for iron oxide copper–gold deposits in the vicinity of these major faults. We then used AMT data to constrain cover thickness to select targets at drillable depths for the stratigraphic drilling program which, in turn, will test the models and improve our understanding of basement geology, cover sequences and mineral potential. This study demonstrates that integration of geophysical data from multiscale surveys is an effective approach to scale reduction during mineral exploration in covered terranes with limited geological knowledge. This Abstract was submitted/presented to the 2021 Australasian Exploration Geoscience Conference 13 - 17 September https://2021.aegc.com.au/.

The Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP) aims to collect long period magnetotelluric data on a half degree grid across the Australian continent. Data were collected in northern Australia under Geoscience Australia’s Exploring for the Future (EFTF) program from 2016 to 2019. This survey covers the area in south parts of Northern Territory and north western region of Queensland. The project aims to improve understanding of the lithospheric structure in northern Australia. It also provide pre-competitive data and knowledge for selecting mineral prospective areas in the under-explored and covered regions. This data package contains the preferred resistivity model and associated information for the project. The report provides details for data acquisition, data process and data inversion. The results provide new insights on the lithospheric architecture and mineral potential in the region.

This OGC compliant service provides access to magnetotelluric data and associated products, which have been produced by Geoscience Australia’s Magnetotelluric Program. This program includes regional magnetotelluric projects and the Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP), a collaborative project between Geoscience Australia, the State and Northern Territory geological surveys, universities, and other research organisations. The data provided in this service comprise resistivity model depth sections and the locations of sites used in these studies.