This Galilee Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. This Galilee Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Galilee Basin is a large intracratonic sedimentary basin in central Queensland. The basin contains a variably thick sequence of Late Carboniferous to Middle Triassic clastic sedimentary rocks dominated by laterally extensive sandstone, mudstone and coal. These rocks were mostly deposited in non-marine environments (rivers, swamps and lakes), although there is minor evidence for marginal marine settings such as deltas and estuaries. Sedimentation did not occur continuously across the approximately 90 million year history of basin development, and intervals of episodic compression, uplift and erosion were marked by distinct depositional breaks. Over much of the surface area of the Galilee Basin the main aquifers targeted for groundwater extraction occur in the younger rocks and sediments that overlie the deeper sequence of the Galilee Basin. The primary aquifers that supply groundwater in this region are those of the Eromanga Basin, as well as more localised deposits of Cenozoic alluvium. However, in the central-east and north-east of the Galilee Basin, the Carboniferous to Triassic rocks occur at or close to surface and several aquifer units supply significant volumes of groundwater to support pastoral and town water supplies, as well as being the water source for several spring complexes. The three main groundwater systems identified in the Galilee Basin occur in the 1. Clematis Group aquifer, 2. partial aquifer of the upper Permian coal measures (including the Betts Creek beds and Colinlea Sandstone), and 3. aquifers of the basal Joe Joe Group. The main hydrogeological units that confine regional groundwater flow in the Galilee Basin are (from upper- to lower-most) the Moolayember Formation, Rewan Formation, Jochmus Formation and Jericho Formation. However, some bores may tap local groundwater resources within these regional aquitards in areas where they outcrop or occur close to surface. Such areas of localised partial aquifer potential may be due in part to enhanced groundwater storage due to weathering and fracturing.

This Laura Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Laura Basin contains sedimentary rocks deposited between 168 and 102 million years ago during the Middle Jurassic to Early Cretaceous. The basin extends offshore beneath the Great Barrier Reef, and forms a bowl-shaped geologic feature. The strata have a maximum thickness of about 1,000 m in the north-central part of the onshore basin. Three main stratigraphic units comprise the stratigraphic succession of the Laura Basin, these being the Rolling Downs Group (Late Aptian to Albian, Cretaceous), the Gilbert River Formation (Lower Cretaceous to Jurassic) and the Dalrymple Sandstone (Upper to Middle Jurassic). The Rolling Downs Group was deposited in a shallow marine environment and has a basal shale unit (the Wallumbilla Formation) with minor siltstone and conglomerate bands overlain by marine silty and sandy claystone. The Gilbert River Formation was deposited in lagoonal to marginal marine environments and is dominated by clay-rich sandstone that is locally glauconitic and interbedded with minor calcareous siltstone, claystone and conglomerate. The Dalrymple Sandstone was deposited in lagoonal and fluvial environments and is dominated by sandstone with lesser claystone, siltstone, conglomerate, tuff and coal. The Laura Basin overlies older rocks of the Permian to Triassic Lakefield Basin, which extends northwards into surrounding marine waters, the Paleozoic metasedimentary rocks of the Hodgkinson region, associated with the Mossman Orogen, and Proterozoic basement rocks.

This Darling Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The geological Darling Basin, covering approximately 130,000 square kilometres in western New South Wales (with parts in South Australia and Victoria), is filled with over 8,000 m of mainly Devonian sedimentary rocks formed in various environments, from alluvial to marine. It sits atop regional basement structures, coinciding with boundaries between Late Paleozoic Kanmantoo, Lachlan, and Southern Thomson Fold Belts. The basin's outcrops are scarce, obscured by younger rocks and sediments. Sedimentary rocks from Late Silurian to Early Carboniferous periods make up the basin, with marine shales and fluvial quartz-rich sandstones being the most common. The Menindee and Bancannia Troughs rest unconformably over Proterozoic and Lower Paleozoic basement rocks, while eastern sub-basins onlap deformed and metamorphosed Lower Paleozoic rocks. A major tectonic shift at the end of the Ordovician transformed south-eastern Australia's palaeogeography from a marginal marine sea to deep troughs and basins. The Darling Basin's discrete sedimentary troughs formed in areas of maximum tectonic extension, including the Ivanhoe, Blantyre, Pondie Range, Nelyambo, Neckarboo, Bancannia, Menindee troughs, and Poopelloe Lake complex. Spatial variation in sedimentary facies indicates potential interconnections between the troughs. The western basin overlies Proterozoic and Lower Paleozoic rocks of the Paroo and Wonominta basement blocks, while the eastern basin onlaps folded, faulted, and metamorphosed older Paleozoic rocks of the Lachlan Fold Belt. The Darling Basin has seen limited hydrocarbon exploration, with wells mostly situated on poorly-defined structures. Indications of petroleum presence include gas seeping from water bores, potential source rocks in sparsely sampled Early Devonian units, and occasional hydrocarbon shows in wells. Reservoir units boast good porosity and permeability, while Cambrian to Ordovician carbonates and shales beneath the basin are considered potential source rocks.

This Tasmania Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Late Carboniferous to Late Triassic Tasmania Basin covers approximately 30,000 square kilometres of onshore Tasmania. The basin contains up to 1500 m of mostly flat-lying sedimentary rocks, and these are divided into two distinct lithostratigraphic units, the Lower and the Upper Parmeener Supergroup. The Lower Parmeener Supergroup comprises Late Carboniferous to Permian rocks that mainly formed in marine environments. The most common rock types in this unit are mudstone, siltstone and sandstone, with less common limestone, conglomerate, coal, oil shale and tillite. The Upper Parmeener Supergroup consists predominantly of non-marine rocks, typically formed in fluvial and lacustrine environments. Common rock types include sandstone, siltstone, mudstone and minor basalt layers. Post-deposition the rocks of the Parmeener Supergroup experienced several major geological events, including the widespread intrusion of tholeiitic dolerite magma during the Middle Jurassic.

This Southern Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. Crustal elements are crustal-scale geological regions primarily based on composite geophysical domains, each of which shows a distinctive pattern of magnetic and gravity anomalies. These elements generally relate to the basement, rather than the sedimentary basins. The South Australian Element comprises the Archean-Mesoproterozoic Gawler Craton and Paleo-Mesoproterozoic Curnamona Province, formed over billions of years through sedimentation, volcanism, magmatism, and metamorphism. The region experienced multiple continental-continent collisions, leading to the formation and breakup of supercontinents like Nuna and Rodinia, along with periods of extensional tectonism. Around 1,400 Ma, both the Gawler Craton and Curnamona Province were cratonised, and during the building of the Rodinia supercontinent (1,300-700 Ma), the present configuration of the region emerged. The area between the Gawler and Curnamona provinces contains Neoproterozoic to Holocene cover, including the Adelaide Superbasin, with the Barossa Complex as its basement, believed to be part of the Kimban Orogen. The breakup of Rodinia in the Neoproterozoic (830-600 Ma) resulted in mafic volcanism and extensional episodes, leading to the formation of the Adelaide Superbasin, characterized by marine rift and sag basins flanking the Gawler Craton and Curnamona Province. During the Mesozoic and Cenozoic, some tectonic structures were rejuvenated, while sedimentary cover obscured much of the now flatter terrain. Metamorphic facies in the region vary, with the Gawler and Curnamona provinces reaching granulite facies, while the Adelaide Superbasin achieved the amphibolite facies. The Gawler Craton contains rocks dating back to approximately 3,150 Ma, while the Curnamona Province contains rocks from 1,720 to 1,550 Ma. These ancient regions have undergone various deformation and metamorphic events but have remained relatively stable since around 1,450 Ma. The Adelaide Superbasin is a large sedimentary system formed during the Neoproterozoic to Cambrian, with distinct provinces. It started as an intracontinental rift system resulting from the breakup of Rodinia and transitioned into a passive margin basin in the southeast and a failed rift in the north. Later uplift and re-instigated rifting led to the deposition of thick Cambrian sediments overlying the Neoproterozoic rocks. Overlying basins include late Palaeozoic to Cenozoic formations, such as the Eromanga Basin and Lake Eyre Basin, which are not part of the assessment region but are adjacent to it.

This Carnarvon Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Carnarvon Basin is a large sedimentary basin covering the western and north-western coast of Western Australia, stretching over 1,000 km from Geraldton to Karratha. It is predominantly offshore, with over 80% of the basin located in water depths of up to 4,500 m. The basin is elongated north to south and connects to the Perth Basin in the south and the offshore Canning Basin in the north-east. It is underlain by Precambrian crystalline basement rocks. The Carnarvon Basin consists of two distinct parts. The southern portion comprises onshore sub-basins with mainly Paleozoic sedimentary rocks extending up to 300 km inland, while the northern section consists of offshore sub-basins containing Mesozoic, Cenozoic, and Paleozoic sequences. The geological evolution of the Southern Carnarvon Basin was shaped by multiple extensional episodes related to the breakup of Gondwana and reactivation of Archean and Proterozoic structures. The collision between Australia and Eurasia in the Mid-Miocene caused significant fault reactivation and inversion. The onshore region experienced arid conditions, leading to the formation of calcrete, followed by alluvial and eolian deposition and continued calcareous deposition offshore. The Northern Carnarvon Basin contains up to 15,000 m of sedimentary infill, primarily composed of siliciclastic deltaic to marine sediments from the Triassic to Early Cretaceous and shelf carbonates from the Mid-Cretaceous to Cenozoic. The basin is a significant hydrocarbon province, with most of the resources found within Upper Triassic, Jurassic, and Lower Cretaceous sandstone reservoirs. The basin's development occurred during four successive periods of extension and thermal subsidence, resulting in the formation of various sub-basins and structural highs. Overall, the Carnarvon Basin is a geologically complex region with a rich sedimentary history and significant hydrocarbon resources. Exploration drilling has been ongoing since 1953, with numerous wells drilled to unlock its hydrocarbon potential.

This Maryborough-Nambour Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Maryborough Basin is a half-graben intracratonic sag basin mainly filled with Early Cretaceous rocks, overlain by up to 100 m of Cenozoic sediments. It adjoins the older Nambour Basin to the south, comprising Triassic to Jurassic rocks. The boundary between the basins has shifted due to changes in sedimentary unit classifications, with the Cretaceous units now restricted to the Maryborough Basin and Jurassic and older units assigned to the Nambour Basin. Both basins are bounded to the west and unconformably overlies older Permian and Triassic rocks in the Gympie Province and Wandilla Province of the New England Orogen. In the south of the Nambour Basin, it partly overlaps with the Triassic Ipswich Basin. The Nambour Basin in the south is primarily composed of the Nambour Formation, with interbedded conglomerate, sandstone, siltstone, shale, and minor coal. Overlying this is the Landsborough Sandstone, a unit with continental, fluviatile sediments and a thickness of up to 450 m. In the north, the Duckinwilla Group contains the Myrtle Creek Sandstone and the Tiaro Coal Measures, which were formerly considered part of the Maryborough Basin but are now associated with the northern Nambour Basin. In contrast, the Maryborough Basin consists of three main Cretaceous units and an upper Cenozoic unit. The Grahams Creek Formation is the deepest, featuring terrestrial volcanic rocks, volcaniclastic sedimentary rocks, and minor pyroclastic rocks. The overlying Maryborough Formation was deposited in a continental environment with subsequent marine incursion and includes mudstone, siltstone, minor sandstone, limestone, conglomerate, and tuff. The upper Cretaceous unit is the Burrum Coal Measures, comprising interbedded sedimentary rocks deposited in fluvial to deltaic environments. The uppermost unit, the Eocene to Miocene Elliott Formation, includes sandstone, siltstone, conglomerate, and shale deposited in fluvial to deltaic environments. Cenozoic sediments overlying the Elliott Formation consist of Quaternary alluvium, coastal deposits, and sand islands like Fraser Island, influenced by eustatic sea level variations. Volcanic deposits and freshwater sediments also occur in some areas. Adjacent basins, such as the Clarence-Moreton Basin and Capricorn Basin, have stratigraphic correlations with the Maryborough Basin. The Oxley Basin lies to the south, overlying the Ipswich Basin. In summary, the Maryborough Basin and the older Nambour Basin exhibit distinct geological characteristics, with varying rock formations, ages, and sedimentary features, contributing to the diverse landscape of the region.

This Carpentaria Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Carpentaria Basin is a vast intra-cratonic sedimentary basin situated on and offshore in north-eastern Australia, covering around 550,000 square kilometres across Queensland and the Northern Territory. It comprises predominantly sandstone-rich rock units deposited during sea level highs from the Late Jurassic to Mid Cretaceous. The basin overlies a heterogeneous Proterozoic basement and is separated from contemporaneous sedimentary structures by basement highs and inliers. Four main depocentres within the larger Carpentaria Basin form four major sub-basins: the Western Gulf Sub-basin, Staaten Sub-basin, Weipa Sub-basin, and Boomara Sub-basin. While the basin is extensive and continuous in Queensland, it becomes more heterogeneous and discontinuous in the Northern Territory. Remnants of the basin's stratigraphy, referred to as the Dunmarra Basin, are found along the Northern Territory coast and inland. The depositional history commenced during the Jurassic with down warping near Cape York Peninsula, resulting in the Helby beds and Albany Pass beds' concurrent deposition. The basin experienced marine transgressions during the Cretaceous, with the Gilbert River Formation widespread and the Wallumbilla Formation occurring during sea level highs. The Carpentaria Basin's strata are relatively undeformed and unmetamorphosed. The Northern Territory sequence displays slightly different stratigraphy, limited to the height of the Aptian marine transgression above the Georgina Basin. The Walker River Formation and Yirrkala Formation represent key units in this area, outcropping as tablelands and mesas largely unaffected by tectonism.

This Money Shoal Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Money Shoal Basin is a large passive margin basin in northern Australia, mainly located in the offshore Arafura Sea. Its sedimentary succession spans from the Mesozoic to the Cenozoic era, reaching a maximum thickness of 4,500 m in the northwest but thinner, less than 500 m, in central and eastern areas. The basin overlays the Neoproterozoic to Permian Arafura Basin and older Proterozoic rocks of the Pine Creek Orogen and McArthur Basin. It is bounded by the Bonaparte Basin to the west and the Carpentaria Basin to the east. The southern margin of the basin occurs onshore and is an erosional feature, although scattered remnant outliers of Money Shoal Basin rocks occur in isolated areas to the south and south-east of Darwin. The northern parts remain less explored, situated beyond Australia's maritime border with Indonesia. The basin's Mesozoic sediments were deposited during passive margin subsidence, and consequently remain relatively undeformed. Compressional tectonics were later initiated during the Cenozoic collision between the Indo-Australian plate and Southeast Asia, causing minor structural disruptions along the northwest margin of the Australian plate. Most of the sediments in the basin were deposited in shallow to marginal marine environments, with minor evidence for short-lived episodes of deltaic and fluvial deposition in some areas. The sedimentary packages in the offshore basin are divided into four groups: Troughton Group equivalent, Flamingo Group equivalent, Bathurst Island Group, and Woodbine Group equivalent. Onshore, the stratigraphic succession is limited to the Plover Formation equivalent, Bathurst Island Group, and the Eocene Van Diemen Sandstone. The Troughton Group extends from the Bonaparte Basin into western parts of the Money Shoal Basin, and chiefly consists of sandstone. The Flamingo Group, identified offshore, is considered equivalent to its Bonaparte Basin counterpart, characterized by sandstone and mudstone deposits, suggesting fluvial and deltaic settings. The Bathurst Island Group dominates onshore, composed mainly of fine-grained claystone, marl, and siltstone. The Woodbine Group is the uppermost unit, and is equivalent to the Woodbine Group of the Bonaparte Basin, consisting of Cenozoic deposits, primarily sandstone and claystone, indicating shallow marine and deltaic environments.

This Ngalia Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Ngalia Basin is an elongate, east-trending basin over 500 km long and 90 km wide. It occurs mostly in the Northern Territory, with limited occurrence in Western Australia. The Ngalia Basin is an intra-cratonic sedimentary basin in a structural downwarp formed by a faulted asymmetrical syncline. The basin began to form about 850 Ma, and contains a Neoproterozoic to Carboniferous sedimentary succession. Sedimentation ceased in response to the 450 to 300 Ma Alice Springs Orogeny. The maximum stratigraphic thickness of the Ngalia Basin is about 5000 m. The basin contains mainly arenaceous sedimentary rocks, with lesser fine-grained rock types and some carbonates. Fining upwards sedimentary cycles are commonly preserved and capped by calcite-cemented fine-grained sandstone and siltstone. Tectonic events disrupted deposition during basin evolution and led to at least ten unconformities. There are many disconformable contacts, with angular unconformities common in areas with abundant faulting. The upper-most arkosic sandstone formations in the Ngalia Basin are the Mount Eclipse Sandstone and the Kerridy Sandstone. These units have an aggregate thickness of several hundreds of metres and are the main aquifers within the Ngalia Basin sequence. There is some interstitial porosity, especially in the Mount Eclipse Sandstone, although joints and fissures associated with faulting provide significant secondary permeability. These aquifers provide good supplies of potable to brackish groundwater, and supply the community borefield at Yuendumu. The Ngalia Basin is almost entirely concealed by Cenozoic cover, including Palaeogene-Neogene palaeovalley, lake and alluvial fan sediment systems and Quaternary aeolian sands. Shallow aquifers with brackish to potable water occur in many palaeovalleys sediments overlying the basin.