national
Type of resources
Keywords
Publication year
Topics
-
Total magnetic intensity (TMI) data measures variations in the intensity of the Earth's magnetic field caused by the contrasting content of rock-forming minerals in the Earth crust. Magnetic anomalies can be either positive (field stronger than normal) or negative (field weaker) depending on the susceptibility of the rock. The 2019 Total magnetic Intensity (TMI) grid of Australia has a grid cell size of ~3 seconds of arc (approximately 80 m). This grid only includes airborne-derived TMI data for onshore and near-offshore continental areas. Since the sixth edition was released in 2015, data from 234 new surveys have been added to the database, acquired mainly by the State and Territory Geological Surveys. The 2019 national grid was derived from a re-levelling of the national magnetic grid database. The survey grids were levelled to each other, and to the Australia Wide Airborne Geophysical Survey (AWAGS), which serves as a baseline to constrain long wavelengths in the final grid. It is estimated that 33 500 000 line-kilometres of survey data were acquired to produce the 2019 grid data, about 2 000 000 line-kilometres more than for the previous edition. The data are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. . This Magnetic Anomaly Map of Australia, Seventh Edition, 2020 - Enhanced Products Package - TMI RTP image (Phase) is a pseudocolour image of the TMI grid of the Magnetic Anomaly Map of Australia, Seventh Edition, 2019. This grid has a cell size of 0.00083 degrees (approximately 88m). This pseudocolour image shows the magnetic response of subsurface features with contrasting magnetic susceptibilities. The image can also be used to locate structural features such as dykes.
-
Total magnetic intensity (TMI) data measures variations in the intensity of the Earth's magnetic field caused by the contrasting content of rock-forming minerals in the Earth crust. Magnetic anomalies can be either positive (field stronger than normal) or negative (field weaker) depending on the susceptibility of the rock. The 2019 Total magnetic Intensity (TMI) grid of Australia has a grid cell size of ~3 seconds of arc (approximately 80 m). This grid only includes airborne-derived TMI data for onshore and near-offshore continental areas. Since the sixth edition was released in 2015, data from 234 new surveys have been added to the database, acquired mainly by the State and Territory Geological Surveys. The 2019 national grid was derived from a re-levelling of the national magnetic grid database. The survey grids were levelled to each other, and to the Australia Wide Airborne Geophysical Survey (AWAGS), which serves as a baseline to constrain long wavelengths in the final grid. It is estimated that 33 500 000 line-kilometres of survey data were acquired to produce the 2019 grid data, about 2 000 000 line-kilometres more than for the previous edition. The data are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. . This Magnetic Anomaly Map of Australia, Seventh Edition, 2020 - Enhanced Products Package - TMI RTP image (PSusp) is a pseudocolour image of the TMI grid of the Magnetic Anomaly Map of Australia, Seventh Edition, 2019. This grid has a cell size of 0.00083 degrees (approximately 88m). This pseudocolour image shows the magnetic response of subsurface features with contrasting magnetic susceptibilities. The image can also be used to locate structural features such as dykes.
-
Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 CSCBA image is an image derived from the 2019 Australian National Gravity Grids A series. These gravity data were acquired under the project No. 202008. The grid used to produce this image has a cell size of 0.00417 degrees (approximately 435m). The data are given in units of um/s^2, also known as 'gravity units', or gu. This gravity anomaly grid is derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD, and marine data were used to generate this grid. The ground gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. Airborne surveys have a line spacing ranging from 0.5 km to 2.5 km. The image shows complete Bouguer anomalies (A series) over Australia and its continental margins. Terrain corrections to gravity were calculated using both offshore bathymetry and onshore topography data.
-
Total magnetic intensity (TMI) data measures variations in the intensity of the Earth's magnetic field caused by the contrasting content of rock-forming minerals in the Earth crust. Magnetic anomalies can be either positive (field stronger than normal) or negative (field weaker) depending on the susceptibility of the rock. The data are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This magnetic grid has a cell size of 0.00083 degrees (approximately 88m).The data are in nanoTesla (or nT). It is estimated that 33 500 000 line-kilometres of survey data collected by State and Territory geological surveys and Geoscience Australia were acquired to produce the 2019 national magnetic grid. The data has had a variable reduction to the pole applied to centre the magnetic anomaly over the magnetised body. The VRTP processing followed a differential reduction to pole calculation up to 5th order polynomial. Magnetic inclination and declination were derived from the IGRF-15 geomagnetic reference model using a data representative date and elevation representative of the survey. The upward continuation manipulates the magnetic data to enhance the large deep source anomalies and minimises shallow anomalies. To constrain long wavelengths in the grid, an independent data set, the Australia-wide Airborne Geophysical Survey (AWAGS) airborne magnetic data, was used to control the base levels of the survey grid. This survey grid is essentially levelled to AWAGS.
-
Total magnetic intensity (TMI) data measures variations in the intensity of the Earth's magnetic field caused by the contrasting content of rock-forming minerals in the Earth crust. Magnetic anomalies can be either positive (field stronger than normal) or negative (field weaker) depending on the susceptibility of the rock. The data are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This magnetic grid has a cell size of 0.00083 degrees (approximately 88m).The data are in nanoTesla (or nT). It is estimated that 33 500 000 line-kilometres of survey data collected by State and Territory geological surveys and Geoscience Australia were acquired to produce the 2019 national magnetic grid. The data has had a variable reduction to the pole applied to centre the magnetic anomaly over the magnetised body. The VRTP processing followed a differential reduction to pole calculation up to 5th order polynomial. Magnetic inclination and declination were derived from the IGRF-15 geomagnetic reference model using a data representative date and elevation representative of the survey. The upward continuation manipulates the magnetic data to enhance the large deep source anomalies and minimises shallow anomalies. To constrain long wavelengths in the grid, an independent data set, the Australia-wide Airborne Geophysical Survey (AWAGS) airborne magnetic data, was used to control the base levels of the survey grid. This survey grid is essentially levelled to AWAGS.
-
The filtered terrestrial dose rate grid is a derivative of the 2019 radiometric or gamma-ray grid of Australia, made of a combination of over 600 individual survey grids. The radiometric, or gamma-ray spectrometric method, measures the natural variations in the gamma-rays detected near the Earth's surface as the result of the natural radioactive decay of potassium (K), uranium (U) and thorium (Th). The data are collected on airborne geophysical surveys conducted by Commonwealth, State and Northern Territory Governments and the private sector. The terrestrial dose rate grid is derived as a linear combination of the filtered K, U and Th grids. A low pass filter is applied to the unfiltered grid to generate the filtered terrestrial dose rate grid. The grid cell size is about 100m (0.001 degrees).
-
<div><strong>Output Type:</strong> Exploring for the Future Extended Abstract</div><div><br></div><div><strong>Short abstract: </strong>Australia is the driest inhabited continent on Earth and relies heavily on groundwater to support communities, industries, ecosystems and cultural values. Despite groundwater resources transcending state and territory boundaries, each jurisdiction operates under different legislative frameworks, policies and water management approaches, and accordingly coordination between jurisdictions is crucial to achieving the common goal of water security. Improving the alignment of water strategies between states and territories requires a national coordination of data collation with common standards and integration of subsurface geology, using a consistent and up-to-date 3D hydrogeological framework for better understanding of groundwater systems and flow pathways at regional to national scales. Despite ever increasing data availability in each jurisdiction there is a lack of comprehensive knowledge regarding cross-jurisdictional sedimentary architecture, aquifer extents and hydraulic connections. Geoscience Australia, through the Exploring for the Future program, is developing a consistent national chronostratigraphic framework to underpin the development of 3D (hydro)geological models which can be used to standardise hydrogeological classifications, update borehole stratigraphy and provide a basis for integrating diverse geoscientific datasets. By collaborating with jurisdictions to harmonise 3D geology nationally through correlation with the geological time scale, aquifer boundaries can be updated and shared with other collaborators such as the Bureau of Meteorology to ensure that national groundwater datasets are updated with the latest geological knowledge. This chronostratigraphic method is suitable for sedimentary basins and provides a consistent platform to support effective resource assessment and management, infrastructure planning, and environmental impact assessment at regional and national scales.</div><div><br></div><div><strong>Citation: </strong>Rollet, N., Vizy, J., Norton, C.J., Hannaford, C., McPherson, A., Symington, N., Evans, T., Nation, E., Peljo, M., Bishop, C., Boronkay, A., Ahmad, Z., Szczepaniak, M., Bradshaw, B., Wilford, J., Wong, S., Bonnardot, M.A. & Hope, J., 2024. Developing a 3D hydrogeological framework for Australia. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, https://doi.org/10.26186/149418 </div>
-
Total magnetic intensity (TMI) data measures variations in the intensity of the Earth's magnetic field caused by the contrasting content of rock-forming minerals in the Earth crust. Magnetic anomalies can be either positive (field stronger than normal) or negative (field weaker) depending on the susceptibility of the rock. The data are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This magnetic grid has a cell size of 0.00083 degrees (approximately 88m).The data are in nanoTesla (or nT). It is estimated that 33 500 000 line-kilometres of survey data collected by State and Territory geological surveys and Geoscience Australia were acquired to produce the 2019 national magnetic grid. The data has had a variable reduction to the pole applied to centre the magnetic anomaly over the magnetised body. The VRTP processing followed a differential reduction to pole calculation up to 5th order polynomial. Magnetic inclination and declination were derived from the IGRF-15 geomagnetic reference model using a data representative date and elevation representative of the survey. The upward continuation manipulates the magnetic data to enhance the large deep source anomalies and minimises shallow anomalies. To constrain long wavelengths in the grid, an independent data set, the Australia-wide Airborne Geophysical Survey (AWAGS) airborne magnetic data, was used to control the base levels of the survey grid. This survey grid is essentially levelled to AWAGS.
-
Total magnetic intensity (TMI) data measures variations in the intensity of the Earth's magnetic field caused by the contrasting content of rock-forming minerals in the Earth crust. Magnetic anomalies can be either positive (field stronger than normal) or negative (field weaker) depending on the susceptibility of the rock. The data are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This magnetic grid has a cell size of 0.00083 degrees (approximately 88m).The data are in nanoTesla (or nT). It is estimated that 33 500 000 line-kilometres of survey data collected by State and Territory geological surveys and Geoscience Australia were acquired to produce the 2019 national magnetic grid. The data has had a variable reduction to the pole applied to centre the magnetic anomaly over the magnetised body. The VRTP processing followed a differential reduction to pole calculation up to 5th order polynomial. Magnetic inclination and declination were derived from the IGRF-15 geomagnetic reference model using a data representative date and elevation representative of the survey. The upward continuation manipulates the magnetic data to enhance the large deep source anomalies and minimises shallow anomalies. To constrain long wavelengths in the grid, an independent data set, the Australia-wide Airborne Geophysical Survey (AWAGS) airborne magnetic data, was used to control the base levels of the survey grid. This survey grid is essentially levelled to AWAGS.
-
Total magnetic intensity (TMI) data measures variations in the intensity of the Earth's magnetic field caused by the contrasting content of rock-forming minerals in the Earth crust. Magnetic anomalies can be either positive (field stronger than normal) or negative (field weaker) depending on the susceptibility of the rock. The data are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This magnetic grid has a cell size of 0.00083 degrees (approximately 88m).The data are in nanoTesla (or nT). It is estimated that 33 500 000 line-kilometres of survey data collected by State and Territory geological surveys and Geoscience Australia were acquired to produce the 2019 national magnetic grid. The data has had a variable reduction to the pole applied to centre the magnetic anomaly over the magnetised body. The VRTP processing followed a differential reduction to pole calculation up to 5th order polynomial. Magnetic inclination and declination were derived from the IGRF-15 geomagnetic reference model using a data representative date and elevation representative of the survey. The upward continuation manipulates the magnetic data to enhance the large deep source anomalies and minimises shallow anomalies. To constrain long wavelengths in the grid, an independent data set, the Australia-wide Airborne Geophysical Survey (AWAGS) airborne magnetic data, was used to control the base levels of the survey grid. This survey grid is essentially levelled to AWAGS.