An elemental chemostratigraphic study of the offshore Otway basin has been undertaken as part of a collaboration between Chemostrat and Geoscience Australia (GA). The main aim of which is to better constrain the sequence boundaries of, and within, the Sherbrook Supersequence. This comprehensive study includes the elemental analysis of 1185 cuttings samples from the Sherbrook Supersequence (and overlying stratigraphy) in 13 wells, located offshore Otway Basin. Sampling of cuttings for this project was particularly challenging as many of the targeted wells have a paucity of material available for destructive analysis. Lithological and well log interpretation in the basin is often inadequate for constraint of sequence boundaries. Nonetheless the use of Inductively Coupled Plasma-Optical Emission Spectrometry and Mass Spectrometry (ICP-OES and MS) analysis was undertaken to complete a regional elemental chemostratigraphic study of the Sherbrook Supersequence, Otway Basin. The resultant chemostratigraphic framework, with nomenclature adapted from Forbes et al (2020) comprises of two chemostratigraphic sequences, eight chemostratigraphic packages and seventeen chemostratigraphic units. It is important to note that in some wells the chemostratigraphic correlation differs extensively from the lithostratigraphy, highlighting areas for closer examination. From the 13 wells analysed at least three, Crayfish-1A, Copa-1 and Breaksea Reef-1, indicate necessary changes to markers for LC2 (base Sherbrook). Additionally, within the Sherbrook Supersequence, there is scope for correlation between wells despite their separation, and seismic ties can now be better constrained. Presented at the Australian Energy Producers (AEP) Conference & Exhibition

<div>The Sherbrook Supersequence (Campanian–Maastrichtian) is the youngest of four Cretaceous supersequences in the Otway Basin and was deposited during a phase of crustal extension. Supersequence thickness is typically less than 1000 ms TWT across the inboard platform. Beyond the platform edge up to 2 800 ms TWT of Sherbrook sediments were deposited in the deep-water Morum and Nelson sub-basins. Analysis of wireline-logs and cores from wells yielded fluvial, deltaic, coastal shelf gross depositional environments (GDEs). As the number of regionally mappable seismic facies is much less than the number of well-based GDEs, the integration of well-based environmental interpretations with seismic facies resulted in three main regional GDE (RGDE); Fluvial Plain, Coastal/Delta Plain, and Shelf. The Fluvial Plain and Coastal/Deltaic RGDEs are almost entirely restricted to the inboard platform areas of the basin. The mud-prone Shelf RGDE is widespread across the deep-water part of the basin where it forms the depocentres of the Morum and Nelson sub-basins. The Shelf RGDE is well imaged on the Otway 2020 2D seismic data that was acquired over the deep-water Otway Basin. In the Morum Sub-basin, the Shelf RGDE is strongly influenced by growth on extensional faults. In contrast, the Shelf RGDE in the Nelson Sub-bsin is a relatively unstructured progradational complex. The presence of mass-transport and incision complexes are consistent with active tectonism during Sherbrook deposition. Reservoir rocks in the deep-water basin are best developed in the Coastal/Deltaic RGDE where it encroaches into the Morum Sub-basin, and where the Austral 3 petroleum system was potentially active within the Sherbrook Supersequence.&nbsp;</div> This presentation was given at the 2023 Australasian Exploration Geoscience Conference (AEGC) 13-18 March, Brisbane (https://2023.aegc.com.au/)

<div>Gas production from the Inner Otway Basin commenced in the early 2000s but the deep-water part of this basin remains an exploration frontier. Historically, the understanding of plays in this region were largely model driven and therefore the ground-truthing of depositional environments (DE) and gross depositional environments (GDE) are critical. This aspect has been investigated for the Sherbrook Supersequence (SS) by the integration of legacy wireline and core data, with regional 2D seismic facies mapping of new and reprocessed data from Geoscience Australia’s 2020 Otway Basin seismic program. Core observations were matched to wireline logs and seismic facies with resulting well based DE interpretations calibrated to seismic resolution Regional GDE intervals. Integration of well and seismic observations lead to the compilation of a basin-wide Regional GDE map for the Sherbrook SS. This GDE map indicates the distribution of Sherbrook SS play elements such as source rock, seal and reservoir, especially across the Deep Water Otway Basin where well data is sparse.</div> Published in The APPEA Journal 2023. <b>Citation:</b> Cubitt Chris, Abbott Steve, Bernardel George, Gunning Merrie-Ellen, Nguyen Duy, Nicholson Chris, Stoate Alan (2023) Cretaceous depositional environment interpretation of offshore Otway Basin cores and wireline logs; application to the generation of basin-scale gross depositional environment maps. <i>The APPEA Journal</i><b> 63</b>, S215-S220. https://doi.org/10.1071/AJ22090

Geoscience Australia has undertaken a regional seismic mapping study of the offshore Otway Basin extending across the explored inner basin to the frontier deep-water region. Seismic interpretation covers over 18000 line-km of new and reprocessed data acquired in the 2020 Otway Basin seismic program and over 40000 line-km of legacy 2D seismic data. We present new basin-scale isochore maps that show the distribution of the Cretaceous depocentres. Maps for the Lower Cretaceous Crayfish and Eumeralla supersequences, together with those recently published for the Upper Cretaceous Shipwreck and Sherbrook Supersequences, completes the set of isochore maps for the main tectonostratigraphic basin intervals. Mapping of basement involved faults has revealed structural fabrics that have influenced depocentre development. The tectonostratigraphic development of depocentres and maps of deep crustal units delineate crustal thinning trends related to late Cretaceous extension phases. This work highlights the need to review and update structural elements. For example, the boundary between the Otway and Sorell basins is now geologically constrained. The refinements to the tectonostratigraphic evolution of the Otway Basin presented here have important implications for the distribution and potential maturity of petroleum systems, especially with regard to heat flow associated with crustal extension. Presented at the 2024 Australian Energy Producers Conference & Exhibition (AEP) (https://energyproducersconference.au/conference/)

The Shipwreck and Sherbrook supersequences together constitute the upper Cretaceous succession in the Otway Basin that was deposited during an extensional basin phase. In the Shipwreck Trough, where the upper Cretaceous succession is well explored, gas fields are hosted by the Shipwreck Supersequence (SS). Elsewhere, the upper Cretaceous interval is lightly explored, and the deep-water area is considered an exploration frontier. We present regional gross depositional environment (RGDE) maps for the LC1.1 and LC1.2 sequences of the Shipwreck SS, and the LC2 Sherbrook SS. Fluvial Plain, Coastal-Delta Plain and Shelf RGDEs were interpreted from wireline logs, cores, and seismic facies. The Fluvial Plain and Coastal-Delta Plain RGDEs are mostly restricted to the inboard platform areas and the inner Morum Sub-basin. The mud-prone Shelf RGDE is widespread across the deep-water Morum and Nelson depocentres. The extent of the Fluvial and Coastal-Delta Plain belts progressively increases up-section, imparting a regressive aspect to the succession, and delineating a large fluvial-deltaic complex in the north-west of the basin. Thick seal development across the greater Shipwreck Trough, potentially mature source rocks in the deep-water basin, and thick reservoir development in the hanging wall of growth faults in the inner Morum Sub-basin are insights derived from this study, and will inform area selection for detailed gross depositional environment mapping, formulation of new hydrocarbon and carbon dioxide storage plays, and inputs for petroleum systems modelling. Presented at the Australian Energy Producers (AEP) Conference & Exhibition (https://energyproducersconference.au/conference/)