tectonic history
Type of resources
Keywords
Publication year
Topics
-
Australian Governments over the past decade have acquired thousands of kilometres of high-quality deep-seismic reflection data. The deep-seismic reflection method is unique among imaging techniques in giving textural information as well as a cross sectional view of the overall crust, including the character of the middle crust, lower crust, Moho, and any upper mantle features. Seismic reflection data can be readily integrated with other geophysical and geological data to provide an unsurpassed understanding of a region's geological history as well as the mineral and energy resource potential. Continental Australia is made up of four main elements (blocks), separated by orogens. Most boundaries between the elements are deeply rooted in the lithosphere, and formed during amalgamation of Australia. Major boundaries within the elements attest to their individual amalgamation, mostly prior to the final construction of the continent. Many of Australia's mineral and energy resources are linked to these deep boundaries, with modern seismic reflection providing excellent images of the boundaries. All of the seismic surveys have provided new geological insights. These insights have significantly advanced the understanding of Australian tectonics. Examples include: preservation of extensional architecture in an otherwise highly shortened terrane (Arunta, Yilgarn, Mt Isa and Tanami), unknown deep structures associated with giant mineral deposits (Olympic Dam, Yilgarn, Gawler-Curnamona), as well as the discovery of unknown basins, sutures and possible subduction zones (Arunta, North Queensland, Gawler-Curnamona). These new insights provide not only an improved tectonic understanding, but also new concepts and target areas for mineral and energy resources.
-
Neotectonism on the eastern Australian passive margin: evidence from the Lapstone Structural Complex
Faults of the Lapstone Structural Complex (LSC) underlie 100 km, and perhaps as much as 160 km, of the eastern range front of the Blue Mountains, west of Sydney, Australia. More than a dozen major faults and monoclinal flexures have been mapped along its extent. Debate continues as to the age of formation of the ~400 m or more of relief relating to the LSC, with estimates ranging from Palaeozoic to Pliocene. The results of an investigation of Mountain Lagoon, a small basin bound on its eastern side by the Kurrajong Fault in the central part of the LSC, favour a predominantly pre-Neogene origin. Drilling on the eastern margin of the lagoon identified 15 m of fluvial, colluvial and lacustrine sediments, overlying shale bedrock. The sediments are trapped behind a sandstone barrier corresponding to the Kurrajong Fault. Dating of pollen grains preserved in sediments at the base of this sediment column suggest that the fault-angle depression began trapping sediment in the Early to Middle Miocene. Strongly heated Permo-Triassic gymnosperm pollen in the same strata provides circumstantial evidence that sediment accumulation post-dates the ca. 18.8 Ma emplacement of the nearby Green Scrub basalt. Our data indicate that only 15 m of the 130 m of throw across the Kurrajong Fault has occurred during the Neogene suggesting a predominantly erosional exhumation origin for current relief at the eastern edge of the Blue Mountains plateau. Sedimentation since the Late Pleistocene appears to have been controlled largely by climatic processes, with tectonism exerting little or no influence.
-
New SHRIMP U/Pb zircon ages of 472.2 ± 5.8 Ma and 470.4 ± 6.1 Ma are presented for the age of peak metamorphism of Barrovian migmatite units. Magmatic advection is thought to have provided significant heat for the Barrovian metamorphism. Published U/Pb emplacement ages for Grampian-age igneous units of Scotland and Ireland define a minimum age range of c. 473.5 to c. 470 Ma for Barrovian metamorphic heating. The new U/Pb ages are consistent with attainment of peak Barrovian metamorphic temperatures during Grampian magmatism. U/Pb-calibrated 40Ar/39Ar ages for white mica from the Barrovian metamorphic series vary systematically with increasing metamorphic grade, between c. 465 Ma for the biotite zone and c. 461 Ma for the sillimanite zone. Microstructural work on the timing of metamorphism in the Barrovian metamorphic series has shown that peak metamorphism occurred progressively later with increasing peak-metamorphic grade. Younging metamorphic age with increasing metamorphic grade across the Barrovian metamorphic series requires that the sequence was cooled in the lower-grade regions while thermal activity continued in the high-grade regions. This thermal scenario is well explained by the presence of a large-scale extensional detachment that actively cooled units from above while the Barrovian metamorphic heating continued at greater depth in the footwall. The spatio-temporal thermal pattern recorded by the Barrovian metamorphic series is consistent with regional metamorphism during crustal extension.
-
Presentation delivered on 8 March 2012 at the Tasman Frontier Petroleum Industry Workshop, 8-9 March 2012, Geoscience Australia, Canberra.
-
Introduction: As part of the Offshore Energy Security Program (2007-2011), Geoscience Australia (GA) undertook an integrated regional study of the deepwater Otway and Sorell basins to improve the understanding of the geology and petroleum prospectivity of the region. The under-explored deepwater Otway and Sorell basins lie offshore of southwestern Victoria and western Tasmania in water depths of 100-4,500 m. The basins developed during rifting and continental separation between Australia and Antarctica from the Cretaceous to Cenozoic and contain up to 10 km of sediment. Significant changes in basin architecture and depositional history from west to east reflect the transition from a divergent rifted continental margin to a transform continental margin. The basins are adjacent to hydrocarbon-producing areas of the Otway Basin, but despite good 2D seismic data coverage, they remain relatively untested and their prospectivity poorly understood. The deepwater (>500 m) section of the Otway Basin has been tested by two wells, of which Somerset 1 recorded minor gas shows. Three wells have been drilled in the Sorell Basin, where minor oil shows were recorded near the base of Cape Sorell 1. Structural framework: Using an integrated approach, new aeromagnetic data, open-file potential field, seismic and exploration well data were used to develop new interpretations of basement structure and basin architecture. This analysis has shown that reactivated north-south Paleozoic structures, particularly the Avoca-Sorell Fault System, controlled the transition from extension through transtension to a dominantly strike-slip tectonic regime along this part of the southern margin. Depocentres to the west of this structure are large and deep in contrast to the narrow elongate depocentres to its east. ...
-
Preserved within the Glenelg River Complex of SE Australia is a sequence of metamorphosed late Neoproterozoic-early Cambrian deep marine sediments intruded by mafic rocks ranging in composition from continental tholeiites to mid-ocean ridge basalts. This sequence originated during breakup of the Rodinia supercontinent and is locally host to lenses of variably sheared and serpentinised mantle-derived peridotite (Hummocks Serpentinite) representing the deepest exposed structural levels within the metamorphic complex. Direct tectonic emplacement of these rocks from mantle depths is considered unlikely and the ultramafites are interpreted here as fragments of sub-continental lithosphere originally exhumed at the seafloor during continental breakup through processes analogous to those that produced the hyper-extended continental margins of the North Atlantic. Subsequent to burial beneath marine sediments, the exhumed ultramafic rocks and their newly acquired sedimentary cover were deformed and tectonically dismembered during arc-continent collision accompanying the early Paleozoic Delamerian Orogeny, and transported to higher structural levels in the hangingwalls of west-directed thrust faults. Thrust-hosted metasedimentary rocks yield detrital zircon populations that constrain the age of mantle exhumation and attendant continental breakup to be no later than late Neoproterozoic-earliest Cambrian. A second extensional event commencing ca. 490 Ma overprints the Delamerian-age structures; it was accompanied by granite magmatism and low pressure-high temperature metamorphism but outside the zone of magmatic intrusion failed to erase the original, albeit modified, rift geometry. This geometry originally extended southward into formerly contiguous parts of the Ross Orogen in Antarctica where mafic-ultramafic rocks are similarly hosted by a deformed continental margin sequence.
-
Detrital zircon age patterns are reported for sandstones from the mid-Permian-Triassic part of the accretionary wedge forming the Torlesse Composite Terrane in Otago, New Zealand and from the early Permian Nambucca Block of the New England Orogen, eastern Australia. In Otago, the Triassic Torlesse samples have a major (64%) age group of Permian-Early Triassic components ca. 240, 255 and 280 Ma, and a minor age group (30%) with a Precambrian-early Paleozoic range (ca. 500, 600 and 1000 Ma). In Permian sandstones nearby, the younger group is diminished (30%), and the older group also contains a major (50%) and unusual, Carboniferous group (components at ca. 330-350 Ma). This trend is similar in sandstones from the Nambucca Block, an early Permian extensional basin in the southern New England Orogen, in which Permian zircons are now minor (<20%), and the age patterns are also dominated (40%) by similar Carboniferous age components, ca. 320-350 Ma.
-
A deep seismic reflection and magnetotelluric survey, conducted in 2007, established the architecture and geodynamic framework of north Queensland, Australia. Results based on the interpretation of the deep seismic data include the discovery of a major, west-dipping, Paleoproterozoic (or older) crustal boundary, interpreted the Gidyea Suture Zone, separating relatively nonreflective, thick crust of the Mount Isa Province from thinner, two layered crust to the east. East of the Mount Isa Province, the lower crust is highly reflective and is subdivided into three mappable seismic provinces (Numil, Abingdon and Agwamin) which are not exposed at the surface. To the west of Croydon, a second major crustal boundary also dips west or southwest, offsetting the Moho and extending below it. It is interpreted as the Rowe Fossil Subduction Zone. This marks the boundary between the Numil and Abingdon seismic provinces, and is overlain by the Etheridge Province. The previously unknown Millungera Basin was imaged below the Eromanga-Carpentaria basin system. In the east, the Greenvale and Charters Towers Provinces, part of the Thomson Orogen, have been mapped on the surface as two discrete provinces, but the seismic interpretation raises the possibility that these two provinces are continuous in the subsurface, and also extend northwards to beneath the Hodgkinson Province, originally forming part of an extensive Neoproterozoic-Cambrian passive margin. Continuation of this passive margin at depth beneath the Hodgkinson and Broken River Provinces suggests that these provinces (which formed in an oceanic environment, possibly as an accretionary wedge at a convergent margin) have been thrust westwards onto the older continental passive margin. The Tasman Line, originally defined to represent the eastern limit of Precambrian rocks in Australia, has a complicated geometry in three dimensions, which is related to regional deformational events during the Paleozoic.
-
The Tasman Frontier region includes c. 3,000,000 sq km of seabed that is thought to be underlain by crust with continental affinities: the Lord Howe Rise, Bellona Trough, Challenger Plateau, Dampier Ridge, Middleton Basin, Fairway Basin, New Caledonia Trough, Norfolk Ridge System, Reinga Basin, and deep-water parts of Taranaki and Northland basins. We have compiled and interpreted c. 100,000 line km of archival seismic reflection data. Using seismic stratigraphy tied to Deep Sea Drilling Project (DSDP) wells, we identify a tectonic and stratigraphic event that we refer to as the 'Tectonic Event of the Cenozoic Tasman Area' (TECTA). This Middle Eocene to Late Oligocene event involved regional uplift followed by 1-2 km of tectonic subsidence of topographic highs, and >2 km of tectonic subsidence in the New Caledonia Trough. Strata below the TECTA reflector (or seismic unit in some places) are locally folded or reverse faulted. We present seismic-stratigraphic evidence that numerous islands were transiently created by uplift on the Lord Howe Rise during the TECTA event. We suggest that the underlying cause of the TECTA event was initiation of the subduction system that has since evolved into the Tonga-Kermadec system. Note: Abstract for initial submission; acceptance to be confirmed.
-
The magma-poor southern Australian rifted margin formed as a result of a long history of lithospheric extension that commenced in the Middle Jurassic. Breakup with Antarctica was diachronous, commencing in the west at ~83 Ma and concluding in the east at ~34 Ma. Initial NW-SE ultra-slow to slow seafloor spreading (83-45 Ma), followed by N-S fast spreading (45 Ma-present), resulted in a broad threefold segmentation of the margin: a long E-W oriented divergent margin segment (Bight-western Otway basins); a NW-SE trending transitional segment (central Otway-Sorell basins); and a N-S oriented transform margin (southern Sorell-South Tasman Rise). Segmentation appears to have been strongly controlled by the pre-existing basement structure. The divergent and western transitional margin segments are characterised by a broad region of lithospheric thinning and thick extensional basin development. In this region, a well-developed ocean-continent transition zone includes basement highs interpreted as exhumed sub-continental lithospheric mantle. Mapping of stratigraphic sequences provides insights into the processes that took place at the evolving margin, including the timing of mantle exhumation, and the diachronous nature of crustal thinning and breakup. The orientation and segmentation of the western and transitional margin segments suggests that initial spreading is likely to have been accommodated by short, extension-parallel transform segments. In the easternmost part of transitional zone, lithospheric thinning is not as marked and the continent-ocean boundary is interpreted to comprise both rift and long transform elements. Here, roughly N-S oriented extension resulted in the development of strongly transtensional basins.