Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 includes airborne DGIR 0.5VD grid is produced from the 2019 Australian National Gravity Grids B series. These gravity data were acquired under the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). The data are derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Airborne gravity and gravity gradiometry data were also included to provide better resolution to areas where ground gravity data was not of a suitable quality. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with Airborne Gravity surveys totaling 345,000 line km and 106,000 line km of Airborne Gravity Gradiometry were used to generate this grid. The ground and airborne gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing for ground observations varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. Airborne surveys have a line spacing ranging from 0.5 km to 2.5 km. The grid shows the half vertical derivative of the de-trended global isostatic residual (DGIR) anomalies over Australia and its continental margins. The DGIR grid was obtained by subtracting 3 quantities (i.e., the near-field isostatic correction, the far-field isostatic correction, and a first order trend correction) from Complete Bouguer Anomaly data (CBA) of the 2019 Australian National Gravity Grids B series. A half vertical derivative was calculated by applying a fast Fourier transform (FFT) process to the DGIR grid of the 2019 Australian National Gravity Grids to produce this grid.

Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 includes airborne DGIR 1VD grid is produced from the 2019 Australian National Gravity Grids B series. These gravity data were acquired under the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). The data are derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Airborne gravity and gravity gradiometry data were also included to provide better resolution to areas where ground gravity data was not of a suitable quality. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with Airborne Gravity surveys totaling 345,000 line km and 106,000 line km of Airborne Gravity Gradiometry were used to generate this grid. The ground and airborne gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing for ground observations varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. Airborne surveys have a line spacing ranging from 0.5 km to 2.5 km. The grid shows the first vertical derivative of the de-trended global isostatic residual (DGIR) anomalies over Australia and its continental margins. The DGIR grid was obtained by subtracting 3 quantities (i.e., the near-field isostatic correction, the far-field isostatic correction, and a first order trend correction) from Complete Bouguer Anomaly data (CBA) of the 2019 Australian National Gravity Grids B series. A first vertical derivative was calculated by applying a fast Fourier transform (FFT) process to the DGIR grid of the 2019 Australian National Gravity Grids to produce this grid.

Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 DGIR 0.5VD image is produced from the 2019 Australian National Gravity Grids A series. These gravity data were acquired under the project No. 202008. The grid represented in this image has a cell size of 0.00417 degrees (approximately 435m). The %%MV_DATASETS/SURVEY_NAME% are derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with marine data were used to generate this grid. The ground gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing for ground observations varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. The grid shows the half vertical derivative of the de-trended global isostatic residual anomalies (A series) over Australia and its continental margins. The original DGIR was obtained by subtracting 3 quantities (i.e., the near-field isostatic correction, the far-field isostatic correction, and a first order trend correction) from Complete Bouguer Anomaly data (CBA) of the 2019 Australian National Gravity Grids A series. A half vertical derivative was calculated by applying a fast Fourier transform (FFT) process to the DGIR grid of the 2019 Australian National Gravity Grids to produce the grid represented in this image.

Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 includes airborne DGIR tilt grid is produced from the 2019 Australian National Gravity Grids B series. These gravity data were acquired under the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). The data are derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Airborne gravity and gravity gradiometry data were also included to provide better resolution to areas where ground gravity data was not of a suitable quality. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with Airborne Gravity surveys totaling 345,000 line km and 106,000 line km of Airborne Gravity Gradiometry were used to generate this grid. The ground and airborne gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing for ground observations varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. Airborne surveys have a line spacing ranging from 0.5 km to 2.5 km. The grid shows a tilt of the de-trended global isostatic residual (DGIR) anomalies over Australia and its continental margins. The DGIR grid was obtained by subtracting 3 quantities (i.e., the near-field isostatic correction, the far-field isostatic correction, and a first order trend correction) from Complete Bouguer Anomaly data (CBA) of the 2019 Australian National Gravity Grids B series. A tilt filter was calculated by applying a fast Fourier transform (FFT) process to the DGIR grid of the 2019 Australian National Gravity Grids B series to produce this grid. A tilt filter is a ratio of the vertical derivative to the total horizontal derivative and is used for detection of edges of geological units.

Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 DGIR grid is produced from the 2019 Australian National Gravity Grids A series. These gravity data were acquired under the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). The data are given in units of um/s^2, also known as 'gravity units', or gu. The data are derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with marine data were used to generate this grid. The ground gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing for ground observations varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. The grid shows de-trended global isostatic residual anomalies (A series) over Australia and its continental margins. This National Gravity Compilation 2019 DGIR grid (DGIR) was obtained by subtracting 3 quantities (i.e., the near-field isostatic correction, the far-field isostatic correction, and a first order trend correction) from Complete Bouguer Anomaly data (CBA) of the 2019 Australian National Gravity Grids A series.

Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 DGIR 1VD image is produced from the 2019 Australian National Gravity Grids A series. These gravity data were acquired under the project No. 202008. The grid represented in this image has a cell size of 0.00417 degrees (approximately 435m). The data are derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with marine data were used to generate this grid. The ground gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing for ground observations varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. The grid shows the first vertical derivative of the de-trended global isostatic residual anomalies (A series) over Australia and its continental margins. The original DGIR was obtained by subtracting 3 quantities (i.e., the near-field isostatic correction, the far-field isostatic correction, and a first order trend correction) from Complete Bouguer Anomaly data (CBA) of the 2019 Australian National Gravity Grids A series. A first vertical derivative was calculated by applying a fast Fourier transform (FFT) process to the DGIR grid of the 2019 Australian National Gravity Grids to produce the grid represented in this image.

Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 includes airborne DGIR image is produced from the 2019 Australian National Gravity Grids B series. These gravity data were acquired under the project No. 202008. The grid The grid represented in this image has a cell size of 0.00417 degrees (approximately 435m). The data are given in units of um/s^2, also known as 'gravity units', or gu. The %%MV_DATASETS/SURVEY_NAME% are derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Airborne gravity and gravity gradiometry data were also included to provide better resolution to areas where ground gravity data was not of a suitable quality. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with Airborne Gravity surveys totaling 345,000 line km and 106,000 line km of Airborne Gravity Gradiometry were used to generate this grid. The ground and airborne gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing for ground observations varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. Airborne surveys have a line spacing ranging from 0.5 km to 2.5 km. The image shows de-trended global isostatic residual anomalies over Australia and its continental margins. This National Gravity Compilation 2019 includes airborne DGIR image (DGIR) was obtained by subtracting 3 quantities (i.e., the near-field isostatic correction, the far-field isostatic correction, and a first order trend correction) from Complete Bouguer Anomaly data (CBA) of the 2019 Australian National Gravity Grids B series.

Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 includes airborne DGIR grid is produced from the 2019 Australian National Gravity Grids B series. These gravity data were acquired under the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). The data are given in units of um/s^2, also known as 'gravity units', or gu. The data are derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Airborne gravity and gravity gradiometry data were also included to provide better resolution to areas where ground gravity data was not of a suitable quality. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with Airborne Gravity surveys totaling 345,000 line km and 106,000 line km of Airborne Gravity Gradiometry were used to generate this grid. The ground and airborne gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing for ground observations varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. Airborne surveys have a line spacing ranging from 0.5 km to 2.5 km. The grid shows de-trended global isostatic residual anomalies over Australia and its continental margins. This National Gravity Compilation 2019 includes airborne DGIR grid (DGIR) was obtained by subtracting 3 quantities (i.e., the near-field isostatic correction, the far-field isostatic correction, and a first order trend correction) from Complete Bouguer Anomaly data (CBA) of the 2019 Australian National Gravity Grids B series.

Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 includes airborne DGIR tilt image is produced from the 2019 Australian National Gravity Grids B series. These gravity data were acquired under the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). The %%MV_DATASETS/SURVEY_NAME% are derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Airborne gravity and gravity gradiometry data were also included to provide better resolution to areas where ground gravity data was not of a suitable quality. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with Airborne Gravity surveys totaling 345,000 line km and 106,000 line km of Airborne Gravity Gradiometry were used to generate this grid. The ground and airborne gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing for ground observations varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. Airborne surveys have a line spacing ranging from 0.5 km to 2.5 km. The image shows a tilt of the de-trended global isostatic residual (DGIR) anomalies over Australia and its continental margins. The DGIR grid was obtained by subtracting 3 quantities (i.e., the near-field isostatic correction, the far-field isostatic correction, and a first order trend correction) from Complete Bouguer Anomaly data (CBA) of the 2019 Australian National Gravity Grids B series. A tilt filter was calculated by applying a fast Fourier transform (FFT) process to the DGIR grid of the 2019 Australian National Gravity Grids B series to produce the image in this grid. A tilt filter is a ratio of the vertical derivative to the total horizontal derivative and is used for detection of edges of geological units.