<div>Diamond exploration over the past decade has led to the discovery of a new province of kimberlitic pipes (the Webb Province) in the Gibson Desert of central Australia. The Webb pipes comprise sparse macrocrystic olivine set in a groundmass of olivine, phlogopite, perovskite, spinel, clinopyroxene, titanian-andradite and carbonate. The pipes resemble ultramafic lamprophyres (notably aillikites) in their mineralogy, major and minor oxide chemistry, and initial 87Sr/ 86Sr and <em>ε</em>Nd-<em>ε</em>Hf isotopic compositions. Ion probe U-Pb geochronology on perovskite (806 ± 22 Ma) indicates the eruption of the pipes was co-eval with plume-related magmatism within central Australia (Willouran-Gairdner Volcanic Event) associated with the opening of the Centralian Superbasin and Rodinia supercontinent break-up. The equilibration pressure and temperature of mantle-derived garnet and chromian (Cr) diopside xenocrysts range between 17 and 40 kbar and 750–1320°C and define a paleo-lithospheric thickness of 140 ± 10 km. Chemical variations of xenocrysts define litho-chemical horizons within the shallow, middle, and deep sub-continental lithospheric mantle (SCLM). The shallow SCLM (50–70 km), which includes garnet-spinel and spinel lherzolite, contains Cr diopside with weakly refertilized rare earth element compositions and unenriched compositions. The mid-lithosphere (70–85 km) has lower modal abundances of Cr diopside. This layer corresponds to a seismic mid-lithosphere discontinuity interpreted as pargasite-bearing lherzolite. The deep SCLM (&gt;90 km) comprises refertilized garnet lherzolite that was metasomatized by a silicate-carbonatite melt.</div><div><br></div><div>Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div><div><br></div><div><strong>Citation:</strong></div><div>Sudholz, Z. J., et al. (2023). Petrology, age, and rift origin of ultramafic lamprophyres (aillikites) at Mount Webb, a new alkaline province in Central Australia. <i>Geochemistry, Geophysics, Geosystems</i>, 24, e2023GC011120.</div><div>https://doi.org/10.1029/2023GC011120</div>

<div>Lithospheric structure and composition have direct relevance for our understanding of mineral prospectivity. Aspects of the lithosphere can be imaged using geophysical inversion or analysed from exhumed samples at the surface of the Earth, but it is a challenge to ensure consistency between competing models and datasets. The LitMod platform provides a probabilistic inversion framework that uses geology as the fabric to unify multiple geophysical techniques and incorporates a priori geochemical information. Here, we present results from the application of LitMod to the Australian continent. The rasters summarise the results and performance of a Markov-chain Monte Carlo sampling from the posterior model space. Release KY22 is developed using the primary-mode Rayleigh phase velocity grids of Yoshizawa (2014).</div><div><br></div><div>Geoscience Australia's Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia's geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia's transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia's regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div>

The collection includes 17,247 measurements of temperature and temperature gradients collected down 5513 individual wells. This information formed the basis for the 'OZTemp Interpreted Temperature at 5km Depth' image of Australia <b>Value: </b>These observations are used to assess heat flow which can be used to infer deep geologic structure, which is valuable for exploration and reconstructions of Australia's evolution <b>Scope: </b>Nationwide collection corresponding to accessible boreholes and published measurements

<div>The lithology, geochemistry, and architecture of the continental lithospheric mantle (CLM) underlying the Kimberley Craton of north-western Australia has been constrained using pressure-temperature estimates and mineral compositions for &gt;5,000 newly analyzed and published garnet and chrome (Cr) diopside mantle xenocrysts from 25 kimberlites and lamproites of Mesoproterozoic to Miocene age. Single-grain Cr diopside paleogeotherms define lithospheric thicknesses of 200–250 km and fall along conductive geotherms corresponding to a surface heat flow of 37–40 mW/m 2. Similar geotherms derived from Miocene and Mesoproterozoic intrusions indicate that the lithospheric architecture and thermal state of the CLM has remained stable since at least 1,000 Ma. The chemistry of xenocrysts defines a layered lithosphere with lithological and geochemical domains in the shallow (&lt;100 km) and deep (&gt;150 km) CLM, separated by a diopside-depleted and seismically slow mid-lithosphere discontinuity (100–150 km). The shallow CLM is comprised of Cr diopsides derived from depleted garnet-poor and spinel-bearing lherzolite that has been weakly metasomatized. This layer may represent an early (Meso to Neoarchean?) nucleus of the craton. The deep CLM is comprised of high Cr2O3 garnet lherzolite with lesser harzburgite, and eclogite. The peridotite components are inferred to have formed as residues of polybaric partial mantle melting in the Archean, whereas eclogite likely represents former oceanic crust accreted during Paleoproterozoic subduction. This deep CLM was metasomatized by H2O-rich melts derived from subducted sediments and high-temperature FeO-TiO2 melts from the asthenosphere.</div><div><br></div><div>Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div><div><br></div><div><strong>Citation:</strong></div><div>Sudholz, Z.J., et al. (2023) Mapping the Structure and Metasomatic Enrichment of the Lithospheric Mantle Beneath the Kimberley Craton, Western Australia,&nbsp;<em><i>Geochemistry, Geophysics, Geosystems</i>,</em>&nbsp;24, e2023GC011040.</div><div>https://doi.org/10.1029/2023GC011040</div>

<div>Lithospheric structure and composition have direct relevance for our understanding of mineral prospectivity. Aspects of the lithosphere can be imaged using geophysical inversion or analysed from exhumed samples at the surface of the Earth, but it is a challenge to ensure consistency between competing models and datasets. The LitMod platform provides a probabilistic inversion framework that uses geology as the fabric to unify multiple geophysical techniques and incorporates a priori geochemical information. Here, we present results from the application of LitMod to the Australian continent. The rasters summarise the results and performance of a Markov-chain Monte Carlo sampling from the posterior model space. Release FR23 is developed using primary-mode Rayleigh phase velocity grids adapted from Fishwick & Rawlinson (2012).</div><div><br></div><div>Geoscience Australia's Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia's geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia's transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia's regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div>

<div>This report presents thermal property data (thermal conductivity data, calculated heat production data, and calculated surface heat flow) from the deep (1751 m) stratigraphic drill hole, NDI Carrara 1. Thermal conductivity analyses were undertaken at the University of Melbourne. Heat production values were calculated from existing whole rock geochemical data. Surface heat flow was determined using the laboratory thermal conductivity data together with in situ downhole temperature data collected previously.</div>

<div><strong>Output Type: </strong>Exploring for the Future Extended Abstract</div><div><br></div><div><strong>Short Abstract: </strong>The thickness and thermal structure of continental lithosphere influences the location of seismic and volcanic hazards and is important for predicting long-term evolution of landscapes, sedimentary basins, and the distribution of natural resources. In this project, we have developed new, continental-scale models of the thermomechanical structure of the Australian plate. We begin by compiling an inventory of >15,000 geochemical analyses of peridotitic xenoliths and xenocrysts from across the continent that have been carried up to the surface in volcanic eruptions. We apply thermobarometric techniques to constrain their pressure and temperature of equilibration and perform steady-state heat flow modelling to assess the paleogeotherm beneath these sites. We subsequently use the paleogeotherms as constraints in a Bayesian calibration of anelasticity at seismic frequencies to provide a mapping between seismic velocity and temperature as a function of pressure. We apply this method to several regional-scale seismic tomography models, allowing the temperature to be continuously mapped throughout the Australian lithospheric and asthenospheric mantle. Our models include assessment of uncertainties and can be used to query thermomechanical properties, such as lithospheric thickness, heat flow through the Moho, and the Curie depth.</div><div><br></div><div><strong>Citation: </strong>Hoggard, M.J., Hazzard, J., Sudholz, Z., Richards, F., Duvernay, T., Austermann, J., Jaques, A.L., Yaxley, G., Czarnota, K. & Haynes, M., 2024. Thermochemical models of the Australian plate. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra. https://doi.org/10.26186/149411</div>

To be technically viable, a geothermal energy prospect has two requirements: sufficiently high temperatures at economically-accessible depths; and a viable reservoir from which to extract the heat by flowing fluid at a suitable rate. In recent years, Geoscience Australia (GA) has applied conductive thermal modelling to 3D geological maps to improve predictive targeting of elevated temperatures in the Australian crust. GA is developing capability to improve targeting of favourable reservoir characteristics, using a combination of geothermal modelling techniques, and the use of geophysical and other geoscience data. GA's assessments of crustal temperature potential have incorporated temperature measurements, heat flow data, thermal conductivity measurements and heat production estimates based on geochemistry data. They have also incorporated other datasets such as outcrop geology, drillhole intersections, seismic and gravity data. GA's initial assessment of North Queensland was qualitative and based on a 2D GIS approach. Subsequent assessments were quantitative and based on 3D thermal models, however, due to computational restrictions; uncertainty in the temperature predictions was assessed only qualitatively. More recently, thermal modelling was conducted on a 3D geological map of the Cooper Basin region in South Australia and Queensland (Meixner et al., 2012) using the SHEMAT software (Clauser, 2003). Uncertainty in the temperature predictions was estimated via a Monte-Carlo based approach using the National Computational Infrastructure (NCI) at the Australian National University. The second requirement for a viable geothermal energy prospect is reservoir potential. GA is developing capability to identify reservoir potential using two related approaches. The first involves use of the TOUGH2-MP reservoir modelling code on the NCI. This code will be used to simulate fluid-flow in synthetic geothermal reservoirs with varying geometries and permeability structures, to identify the most desirable characteristics. The second approach involves application of geophysical methods to improve predictive targeting of geothermal reservoirs. GA has used numerical modelling techniques to improve predictive targeting of elevated crustal temperatures and is now building capability to assist predictive targeting of favourable reservoir characteristics. This will allow new geothermal targets to be identified based on the two geological requirements for a successful geothermal prospect. By applying this approach on a national scale, GA will be able to provide an integrated, Australia-wide assessment of geothermal potential. Clauser, C. (ed.), 2003. Numerical Simulation of Reactive Flow in Hot Aquifers: SHEMAT and Processing SHEMAT. Springer-Verlag: Berlin Heidelberg. Meixner, A.J., Kirkby, A.L., Lescinsky, D.T., and Horspool, N., 2012b. The Cooper Basin 3D Map Version 2: Thermal modelling and temperature uncertainty. Record 2012/60. Geoscience Australia: Canberra.

This map presents radiogenic crustal heat production values calculated from available geochemical data from basement rock exposures from across the Australian Antarctic Territory (AAT). Heat production is derived from the radiogenic decay of the radioactive elements, primarily, U, Th and K. This map, along with the companion GA record (2012/63), highlights the magnitude and heterogeneity of crustal heat production across the AAT, and provides earth scientists with the first crustal heat production assessment across much of East Antarctica. Crustal heat production values across the AAT show a wide range from negligible to as much as 65 'Wm-3. Generally, elevated heat production values are characteristic of Cambrian felsic intrusives, with intermediate values from Proterozoic intrusive and metasediments (2-8 Wm-3), and low values (<2 'Wm-3) from Archean rocks. A good illustration of the correlation of geological age with heat production is from Prydz Bay (map 5), where the Vestfold Hills (mostly ~2500 Ma in age) exhibits uniformly low heat production (average ~0.8 'Wm-3), whereas Proterozoic rocks south of the Vestfold Hills have intermediate values (average ~2.6 'Wm-3). Cambrian intrusives, in contrast, have significantly elevated values (average ~15 'Wm-3). We anticipate that this simple compilation of crustal heat production may form a basis for future studies on the thermal structure of the East Antarctic crust, in particular, sub-glacial heat flow, which remains a critical, yet poorly characterised, boundary parameter controlling the dynamic behaviour of the vast Antarctic ice sheet. For further information and data tables, the reader is referred to 'A reconnaissance crustal heat production assessment of the Australian Antarctic Territory (AAT)' by C. J. Carson and M. Pittard, GA record 2012/063 (pp 57), Geocat 74073.

<div>Australia’s Energy Commodity Resources (AECR) 2024 provides estimates of Australia’s energy commodity reserves, resources, and production as at the end of 2022. The 2024 edition of AECR also includes previously unpublished energy commodity resource estimates data compiled by Geoscience Australia for the 2022 reporting period. The AECR energy commodity resource estimates are based primarily on published open file data and aggregated (de-identified) confidential data. The annual assessment provides a baseline for the production and remaining recoverable resources of gas, oil, coal, uranium and thorium in Australia, and the global significance of our nation’s energy commodity resources. The publication also presents chapters on the status of emerging clean energy resources in Australia, including geothermal, carbon capture and storage (CCS) and hydrogen.</div>