Large-scale storage of commercially produced hydrogen worldwide is presently stored in salt caverns. Through the Exploring for the Future program, Geoscience Australia is identifying and mapping salt deposits in Australia that may be suitable for hydrogen storage. The Adavale Basin in central Queensland is home to the Boree Salt, which is the only known thick salt deposit in eastern Australia and has the potential to become a strategic resource for underground hydrogen storage. The Boree Salt primarily consists of halite and can be as much as 555 meters thick in certain wells. Geoscience Australia contracted CSIRO to conduct a geochemistry test on four salt core samples from the Boree 1 and Bury 1 wells to analyse potential organic matter. Seven sub-samples of dark and clean salt from each core were sent to CSIRO's organic geochemistry laboratory in Lindfield, NSW. The results indicated that no organic matter was found in the Boree Salt samples. Disclaimer Geoscience Australia has tried to make the information in this product as accurate as possible. However, it does not guarantee that the information is totally accurate or complete. Therefore, you should not solely rely on this information when making a commercial decision. This dataset is published with the permission of the CEO, Geoscience Australia.

The integrated use of seismic and gravity data can help to assess the potential for underground hydrogen storage in salt caverns in the offshore Polda Basin, South Australia. Geophysical integration software was trialled to perform simultaneous modelling of seismic amplitudes and traveltime information, gravity, and gravity gradients within a 2.5D cross-section. The models were calibrated to existing gravity data, seismic and well logs improving mapping of the salt thickness and depth away from well control. Models included known salt deposits in the offshore parts of the basin and assessed the feasibility for detection of potential salt deposits in the onshore basin, where there is limited well and seismic coverage. The modelling confirms that candidate salt cavern storage sites with salt thicknesses greater than 400-500 m should be detectable on low altitude airborne gravity surveys. Identification of lower cost onshore storage sites will require careful calibration of gravity models against measured data, rather than relying on the observation of rounded anomalies associated with salt diapirism. Ranking of the most prospective storage sites could be optimized after the acquisition of more detailed gravity and gradiometry data, preferably accompanied by seismic reprocessing or new seismic data acquisition.

Large-scale storage of commercially produced hydrogen worldwide is presently stored in salt caverns. Through the Exploring for the Future program, Geoscience Australia is identifying and mapping salt deposits in Australia that may be suitable for hydrogen storage. The Boree Salt in the Adavale Basin of central Queensland is the only known thick salt accumulation in eastern Australia, and represent potentially strategic assets for underground hydrogen storage. The Boree Salt consists predominantly of halite and can be up to 555 m thick in some wells. Geoscience Australia contracted CSIRO to conduct analyses four Boree Salt whole cores extracted from Boree 1 and Bury 1 wells. The tests were carried out to determine the seal capacity (mercury injection capillary pressure - MICP), mineralogy (X-ray diffraction - XRD), and inorganic geochemistry of the cores. The entire core sections were scanned using X-ray CT images. In addition, four plugs were taken from the cores and tested for dry bulk density, grain density, gas porosity, and permeability. Two plugs underwent ultra-low permeability tests. The MICP test suggests that the Boree Salt is a competent seal for hydrogen storage. Mineralogy testing (XRD) revealed that the Boree Salt samples primarily comprise halite (96.5%), minor anhydrite (1.32%) and dolomite (1.65%) with traces of quartz, calcite, sylvite and cristobalite. Inorganic geochemistry results show sodium (Na; 55.4% average) is the most abundant element. Further tests, such as the creep test, in-situ seal capacity test, and leaching tests, are required to determine the suitability of the Boree Salt for underground hydrogen storage. Disclaimer: Geoscience Australia has tried to make the information in this product as accurate as possible. However, it does not guarantee that the information is totally accurate or complete. Therefore, you should not solely rely on this information when making a commercial decision. This dataset is published with the permission of the CEO, Geoscience Australia.

<div>The interpretation of AusAEM airborne electromagnetic (AEM) survey conductivity sections in the Canning Basin region delineates the geo-electrical features that correspond to major chronostratigraphic boundaries, and captures detailed stratigraphic information associated with these boundaries. This interpretation forms part of an assessment of the underground hydrogen storage potential of salt features in the Canning Basin region based on integration and interpretation of AEM and other geological and geophysical datasets. A main aim of this work was to interpret the AEM to develop a regional understanding of the near-surface stratigraphy and structural geology. This regional geological framework was complimented by the identification and assessment of possible near-surface salt-related structures, as underground salt bodies have been identified as potential underground hydrogen storage sites. This study interpreted over 20,000 line kilometres of 20&nbsp;km nominally line-spaced AusAEM conductivity sections, covering an area approximately 450,000 km2 to a depth of approximately 500&nbsp;m in northwest Western Australia. These conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This interpretation produced approximately 110,000 depth estimate points or 4,000 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for Geoscience Australia’s Estimates of Geological and Geophysical Surfaces database, the national repository for formatted depth estimate points. Despite these interpretations being collected to support exploration of salt features for hydrogen storage, they are also intended for use in a wide range of other disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. Therefore, these interpretations will benefit government, industry and academia interested in the geology of the Canning Basin region.</div>

Large-scale storage of commercially produced hydrogen worldwide is presently stored in salt caverns. Through the Exploring for the Future program, Geoscience Australia is identifying and mapping salt deposits in Australia that may be suitable for hydrogen storage. The Boree Salt in the Adavale Basin of central Queensland is the only known thick salt accumulation in eastern Australia, and represent potentially strategic assets for underground hydrogen storage. The Boree Salt consists predominantly of halite and can be up to 555 m thick in some wells. Geoscience Australia contracted CSIRO to conduct rock mechanics and petrophysical laboratory analyses on four Boree Salt whole cores from Boree 1 and Bury 1 wells. Four plugs extracted from the cores were tested to determine dry bulk density, grain density, gas porosity, permeability, Poisson's ratio and Young's Modulus, while two plugs underwent ultra-low permeability tests. Triaxial tests were carried out on the four samples at confining pressures of 10, 20, 30 and 40 MPa. The average dry bulk density and grain density were found to be 2.15 g/cm3 and 2.17 g/cm3, respectively. The average gas and total porosity were determined to be 0.98% and 1.0%, respectively, while the average permeability of the two samples from Boree 1 is 0.85 µD. The triaxial test results showed that the average Poisson's ratio was 0.188, and Young's modulus was 16.1 GPa. Further tests, such as the creep test, in-situ seal capacity test, and leaching tests, are required to determine the suitability of the Boree Salt for underground hydrogen storage. Disclaimer: Geoscience Australia has tried to make the information in this product as accurate as possible. However, it does not guarantee that the information is totally accurate or complete. Therefore, you should not solely rely on this information when making a commercial decision. This dataset is published with the permission of the CEO, Geoscience Australia.