Geoscience Australia commissioned reprocessing of selected legacy 2D seismic data in the Officer Basin in South Australia as part of the Exploring for the Future (EFTF) program. Reprocessing of these data occurred between April 2021 and August 2021. This seismic data release package contains reprocessed data from five surveys acquired between 1966 and 1987. In total it contains approximately 1425 km of industry 2D reflection seismic data comprising of 25 lines from 5 separate vintages. The seismic surveys include the Serpentine Lakes Reconnaissance Survey, 1966; the Everard Survey, 1974; the Marla Bore Survey, 1984; the Ungoolya, Giles and Marla-Byilkaoora Surveys, 1985; and the Amoco Officer Basin Survey, 1987 and cover areas within the Officer Basin in South Australia. The objective of the seismic reprocessing was to produce processed 2D land seismic reflection datasets using the latest processing techniques to improve continuity and data quality over legacy processing. In particular, the purpose of the reprocessing was to image the structure and stratigraphic architecture of the Neoproterozoic to Paleozoic Officer Basin in this area. All vintages except the 1966 Serpentine lakes survey were processed to Pre-stack Time Migration as well as Post-Stack Time Migration. The 1966 Serpentine Lakes Survey was processed only to Post-Stack Time Migration. <b>The Velseis data package is available on request from clientservices@ga.gov.au - Quote eCat# 145905</b>

This report presents groundwater level information collected during Geoscience Australia’s Musgrave Palaeovalley Project. The Musgrave Palaeovalley Project was conducted as part of Exploring for the Future (EFTF), an Australian Government funded geoscience data and information acquisition program. The eight-year, $225 million program aims to deliver new geoscience data and knowledge to inform decision-making by government, community, and industry on the sustainable development of Australia's mineral, energy, and groundwater resources.</div><div>Groundwater level data was collected during two hydrogeochemical surveys undertaken in March and May 2023 based around the remote communities of Warburton, Kaltukatjara, Wanarn, Blackstone and Jameson in Western Australia and the Northern Territory. Sixteen bores were measured for their groundwater levels. The results are contained herein and within the attached CSV file.

The Neoproterozoic to Middle Ordovician sediments of the Officer Basin, Australia are difficult to correlate, in part because biostratigraphic studies of acritarchs and stromatolites are localised, isotopic studies are rare, and seismic models are technically challenged by the occurrence of basaltic and halite prone-sections. Hence, the chemostratigraphic framework presented here provides an independent stratigraphic model for the Neoproterozoic to Middle Ordovician sediments of the Officer Basin. A total of six chemostratigraphic mega-sequences have been geochemically defined and assigned to the stratigraphy; these have been further subdivided into twenty-eight chemostratigraphic sequences. The chemostratigraphic zonation has been established upon elemental changes attributed to provenance and climatic variation which can be used for correlation as they convey regional, rather than local, changes in sedimentation. The elemental data reveals that there is lateral variation within the established lithostratigraphy (e.g., within the members of the Observatory Hill and Hussar formations), which is suggestive of localised sediment source input to different areas of the basin. Presented to the 2022 Central Australian Basins Symposium IV (CABS) 29-30 August (https://agentur.eventsair.com/cabsiv/)

As part of the Exploring for the Future (EFTF) program, a chemostratigraphic framework for the Officer Basin was developed that correlates inorganic geochemical sequences between exploration wells. The Officer Basin spans 525,000 km² across Western Australia and South Australia, where it remains an unproven frontier basin which has seen little exploration. The objective of this study was to undertake a bulk rock elemental chemostratigraphy study on ten historic wells in order to better correlate the Neoproterozoic and Cambrian sections. Ten study wells, five from Western Australia and five from South Australia, were selected, and core (241) and cuttings (1,245) samples were acquired from their respective state core libraries. All samples were analysed using Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS), resulting in quantitative data for 50 elements. The approximate proportions of dolomite, clastics, halite and anhydrite for the samples were derived using stoichiometric geochemical calculations. Halite was identified in some formations based on mud log and wireline data, but was not always preserved in the cuttings samples. This non-detection of halite resulted in poor matches between the wireline gamma ray (GR) and ChemGR profiles for halite-bearing units in some wells (e.g. Dragoon-1, Mulyawara-1, and Yowalga-3). Key element and ratios utilised to subdivide the strata were principally chosen to highlight changes in sediment provenance, climatic, and organic matter changes, as they typically have the best correlation potential over a greater distance. The stratigraphy within the study wells has been subdivided into eight chemostratigraphic mega-sequences referred to as MS1 to MS8, which are further subdivided into a total of twenty-four sequences. Mega-Sequences MS1 to MS4 broadly correspond to the published Neoproterozoic–Cambrian Centralian Supersequences (CS1 to CS4). While overall there is broad agreement between these two schemes, there are also sections where the stratigraphy has been reassigned. For example, within Kutjara-1, the section previously assigned to Centralian Supersequence CS2, and equivalent to the Cryogenian Tapley Hill Formation, is assigned to Mega-Sequence MS3 (not MS2). Within MS4, the lithostratigraphically defined members of the Observatory Hill Formation show some significant variation to the chemostratigraphy, with differences occurring within sequences MS4-S3, MS4-S4 and MS4-S5 (e.g. Birksgate-1; Trainor Echo-1). Mega-Sequence MS6 encompasses the Mount Chandler Sandstone in Trainor Echo-1 in the east and the lithological lateral equivalent Lennis Sandstone in Lungkarta-1/ST1 and Yowalga-1 in the west; however, these two argillaceous sandstones are chemically distinct. Carbonate-containing samples from three wells (Birksgate-1, Yowalga-3, and Giles-1) were analysed for their δ13Ccarb and δ18Ocarb isotope signature using Isotope-Ratio Mass Spectrometry (IRMS), with results from the least altered carbonates being of sufficient quality to attempt preliminary age dating. Comparison of the Officer Basin isotope data to global type sections enabled tentative correlation of the Yowalga-3 carbonates to the Tonian and late Ediacaran, and the Birksgate-1 carbonates to the early Cambrian. The geochemistry analyses from 10 basin-wide wells provide a robust dataset that has been used to confirm which sections correlate within the existing lithostratigraphic and sequence stratigraphic framework. This study also highlights where further work needs to be undertaken to elucidate the spatial and temporal relationships of some Cryogenian and early Cambrian sections across the entire basin, given that rocks of these ages contain both potential source and reservoir rocks for petroleum generation and accumulation.

Geoscience Australia’s Exploring for the Future Program is investigating the mineral, energy and groundwater resource potential of sedimentary basins and basement provinces in northern Australia and parts of South Australia. A key challenge in exploring Australian onshore sedimentary basins is that these are often areas with limited seismic data coverage to image the sub-surface structural and stratigraphic architecture. Consequently, well logs are often the main data sets that are used to understand the sub-surface geology. Where good seismic data coverage is available, a considerable amount of time is generally required to undertake an integrated interpretation of well and seismic data. The primary aim of this study is to develop a methodology for visualising the three-dimensional tectonostratigraphic architecture of sedimentary basins using just well data, which can then be used to quickly screen areas warranting more detailed studies of resource potential. A workflow is documented which generates three-dimensional well correlations using just well formation tops to visualise the regional structural and stratigraphic architecture of the Amadeus, Canning, Officer and Georgina basins in the Centralian Superbasin. A critical step in the workflow is defining regionally correlatable supersequences that show the spatial linkages and evolution through time of lithostratigraphic units from different basin areas. Thirteen supersequences are defined for the Centralian Superbasin, which were deposited during periods of regional subsidence associated with regional tectonic events. Regional three-dimensional correlation diagrams have been generated to show the spatial distribution of these supersequences, which can be used as a reconnaissance tool for visualising the distribution of key stratigraphic elements associated with petroleum, mineral and groundwater systems. Three-dimensional well correlations are used in this study to redefine the Centralian Superbasin as encompassing all western, northern and central Australian basins that had interconnected depositional systems driven by regional subsidence during one or more regional tectonic events between the Neoproterozoic and middle Carboniferous. The Centralian Superbasin began to form during a series of Neoproterozoic rift-sag events associated with the break-up of the Rodinia Supercontinent at about 830 Ma. Depositional systems in the Amadeus and Officer basins were partially disconnected by an emergent Musgrave Province during these early stages of superbasin evolution. Subsequent regional uplift and erosion of the superbasin occurred during the late Neoproterozoic–early Cambrian Petermann Orogeny. The Officer and Amadeus were permanently disconnected by the uplifted Musgrave Province following this major orogenic event. Rejuvenation of the Centralian Superbasin occurred during middle–late Cambrian extension and subsidence resulting in the generation of several new basins including the Canning Basin. Subsidence during the Ordovician Larapinta Event created an intracontinental seaway that episodically connected the Canning, Amadeus, Georgina and Officer basins to the proto-Pacific Ocean in the east. Fragmentation of the Centralian Superbasin began at the onset of the Alice Springs Orogeny during the Rodingan Event when the uplifted Arunta Region disconnected the Amadeus and Georgina basins. The Rodingan Movement initially disconnected depositional systems between the Canning and Amadeus basins, which promoted the development of a large evaporitic depocentre over the southern Canning Basin. However, these basins subsequently reconnected during the Early Devonian Prices Creek Movement. Complete fragmentation of the Centralian Superbasin occurred during the Late Devonian–middle Carboniferous Pillara Extension Event when the Canning and Amadeus basins became permanently disconnected. Widespread uplift and erosion at the culmination of the Alice Springs Orogeny in the middle Carboniferous resulted in final closure of the Centralian Superbasin.

<div>Geoscience Australia’s Onshore Basin Inventories project delivers a single point of reference and creates a standardised national basin inventory that provides a whole-of-basin catalogue of geology, petroleum systems, exploration status and data coverage of hydrocarbon-prone onshore Australian sedimentary basins. In addition to summarising the current state of knowledge within each basin, the onshore basin inventory reports identify critical science questions and key exploration uncertainties that may help inform future work program planning and decision making for both government and industry. Volume 1 of the inventory covers the McArthur, South Nicholson, Georgina, Wiso, Amadeus, Warburton, Cooper and Galilee basins and Volume 2 expands this list to include the Officer, Perth and onshore Canning basins. Under Geoscience Australia’s Exploring for the Future (EFTF) program, several new onshore basin inventory reports are being delivered. Upcoming releases include the Adavale Basin of southern Queensland, and a compilation report addressing Australia’s poorly understood Mesoproterozoic basins. These are supported by value-add products that address identified data gaps and evolve regional understanding of basin evolution and prospectivity, including petroleum systems modelling, seismic reprocessing and regional geochemical studies. The Onshore Basin Inventories project continues to provide scientific and strategic direction for pre-competitive data acquisition under the EFTF work program, guiding program planning and shaping post-acquisition analysis programs.</div>

Led by Geoscience Australia, Exploring for the Future (EFTF) is a A$225 million Australian Government program dedicated to exploring Australia’s resource potential and boosting investment. The EFTF program energy component aimed to attract industry investment by delivering a suite of new precompetitive geoscience data in prospective Australian sedimentary basins. Through EFTF, Geoscience Australia has acquired significant amounts of new geomechanical data from underexplored onshore sedimentary basins with identified hydrocarbon prospectivity, from both legacy and newly acquired samples. These data were acquired to build a better understanding of basin sediment rock properties, particularly looking at the reservoir and seal potential of postulated unconventional and conventional targets. Four major datasets are presented herein, representing prospective intervals from the Paleozoic Canning Basin of Western Australia, the Neoproterozoic-Paleozoic Officer Basin of South Australia and Western Australia, the Paleo-Mesoproterozoic South Nicholson region of the Northern Territory and northwest Queensland, and the Paleo-Mesoproterozoic Birrindudu Basin of the Northern Territory and Western Australia. Additionally, the Paleo-Mesoproterozoic McArthur Basin of the Northern Territory is represented by a small number of analyses. Tests include unconfined compressive strength tests, laboratory ultrasonic measurements, single and multi-stage triaxial tests and Brazilian tensile strength tests. These datasets are a precompetitive resource that can facilitate investment decisions in frontier regions, helping to identify elements of conventional and unconventional hydrocarbon systems as well as providing essential data to assess geological storage opportunities. <b>Citation:</b> Bailey Adam, Dewhurst David, Wang Liuqi, Carson Chris, Anderson Jade, Butcher Grace, Henson Paul (2024) Exploring for the Future: new geomechanical data in frontier Australian basins. Australian Energy Producers Journal 64, 155-168. https://doi.org/10.1071/EP23029

A key challenge in exploring Australian onshore sedimentary basins is limited seismic data coverage. Consequently, well logs are often the main datasets that can be used to understand the subsurface geology. The primary aim of this study was to develop a methodology for visualising the three-dimensional (3D) tectonostratigraphic architecture of sedimentary basins using well data, which can then be used to quickly screen areas warranting more detailed studies of resource potential. This project has developed a workflow that generates 3D well correlations using sequence stratigraphic well tops to visualise the regional structural and stratigraphic architecture of the Amadeus, Canning, Officer and Georgina basins in the Centralian Superbasin. Thirteen Neoproterozoic‒Paleozoic supersequence tops were interpreted in 134 wells. Three-dimensional well correlations provide an effective regional visualisation of the tectonostratigraphic architecture across the main depocentres. This study redefines the Centralian Superbasin as encompassing all western, northern and central Australian basins that had episodically interconnected depositional systems driven by regional subsidence during one or more regional tectonic events between the Neoproterozoic and middle Carboniferous. The Centralian Superbasin began to form during Neoproterozoic extension, and underwent several phases of partial or complete disconnection and subsequent reconnection of depositional systems during various regional tectonic events before final separation of depocentres at the culmination of the Alice Springs Orogeny. Regional 3D correlation diagrams have been generated to show the spatial distribution of these supersequences, which can be used to visualise the distribution of stratigraphic elements associated with petroleum, mineral and groundwater systems. <b>Citation: </b>Bradshaw, B., Khider, K., MacFarlane, S., Rollet, N., Carr, L. and Henson, P., 2020. Tectonostratigraphic evolution of the Centralian Superbasin (Australia) revealed by three-dimensional well correlations. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

<div>This report details results and methodology from two hydrochemistry sampling programs performed as part of Geoscience Australia’s Musgrave Palaeovalley Project. The Musgrave Palaeovalley Project is a data acquisition and scientific investigation program based around the central west of Australia. It is aimed at investigating groundwater processes and resources within the Cenozoic fill and palaeovalleys of the region. This project, and many others, have been performed as part of the Exploring for the Future (EFTF) program, an eight-year, $225 million Australian Government funded geoscience data and precompetitive information acquisition program.</div><div>Data released here is from 18 bores sampled for groundwater and tested for a range of analytes including field parameters, major and minor elements, isotopes and trace gases. The sampling methods, quality assurance/quality control procedures, analytical methods and results are included in this report.</div>

Well and seismic correlation schemes exist for the Western Australian and South Australian parts of the Officer Basin but there are inconsistencies between the western and eastern regions. Hence, as part of the Exploring for the Future Officer-Musgrave Project, a chemostratigraphic correlation has been determined for the sedimentary fill of the Officer Basin with emphasis on Neoproterozoic to Cambrian rocks. The correlations have been developed on whole rock inorganic geochemical data obtained from the analysis of 10 study wells which span the basin from Western Australia and into South Australia. A total of 8 chemostratigraphic mega-sequences (MS) are recognised across the basin, that in turn are subdivided into a total of 24 chemostratigraphic sequences. MS1 to MS6 include the Neoproterozoic to Cambrian sedimentary rocks and are the focus of this study. The Neoproterozoic–Cambrian mega-sequences MS1 to MS4 broadly correspond to the previously defined Centralian supersequences CS1 to CS4 and provide robust well-control to the regional seismic correlations. Confidence in the correlation of these old rocks are important since they contain both potential source and reservoir rocks for petroleum generation and accumulation. MS7 is equivalent to the Permian Paterson Formation, while MS8 is equivalent to the Mesozoic section. The elemental data has also been used to elucidate aspects of the petroleum system by characterising reservoirs and identifying fine-grained siliciclastics deposited in anoxic environments which may have source potential. This work is expected to further improve geological knowledge and reduce the energy exploration risk of the Officer Basin, a key focus of this program. <b>Citation:</b> Edwards D.S., Munday S., Wang L., Riley D. & Khider K., 2022. Neoproterozoic and Cambrian chemostratigraphic mega-sequences of the Officer Basin; a regional framework to assist petroleum and mineral exploration. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, https://dx.doi.org/10.26186/146285