MinEx CRC Mundi Airborne Electromagnetic Survey, NSW, 2021: XCITE® AEM data and conductivity estimates The package contains processed data from the “MinEx CRC Mundi Airborne Electromagnetic Survey” that was flown over the Curnamona Orogen and overlying Eromanga and Lake Eyre basins, north of Broken Hill, in Western New South Wales. The 2,940 line regional survey was flown east-west at 2.5 km nominal line spacing in 2021 by New Resolution Geophysics Pty Ltd (NRG) using the XCITE® airborne electromagnetic system. The Geological Survey of New South Wales commissioned the survey as part of the MinEx Cooperative Research Centre’s (MinEx CRC) National Drilling Initiative (NDI), the world’s largest mineral exploration collaboration. It brings together industry, government, research organisations and universities to further our understanding of geology, mineral deposits and groundwater resources in areas where rocks aren’t exposed at earth’s surface. The Geological Survey of New South Wales is a major participant in the NDI program, committing $16 million to the program over 10 years. In NSW, the program focuses on five areas in the state’s central and far west, where metallic minerals potentially exist under a layer of younger barren geology. These areas are North Cobar, South Cobar, Broken Hill (Mundi), Forbes and Dubbo. Geoscience Australia is also a major participant in the NDI, committing $50 million Australia-wide over the ten years of the MinEx CRC. Geoscience Australia partly funded the survey by providing funds for an additional 940 line kilometres of data acquisition to broaden the geographical reach of the survey under the Exploring for the Future Darling-Curnamona-Delamerian Project. Additionally, Geoscience Australia provided in-kind support to the project by managing the survey data acquisition and processing, undertaking the quality control of the survey and generating one of the two inversions and associated derived products that are included in the data package. The data release package comntains 1. A data release package summary PDF document. 2. The survey logistics and processing report and XCITE® system specification files 3. ESRI shape files for the flight lines and boundary 4. KML (Google Earth) files of the flight lines 5. Final processed point located dB/dt electromagnetic, magnetic and elevation data - in ASEG-GDF2 format - in Geosoft GDB format 6. Final processed point located BField electromagnetic, magnetic and elevation data - in ASEG-GDF2 format - in Geosoft GDB format 7, Multiplots -graphical (PDF) multiplot profiles and estimated conductivity sections (NRG inversion) for each flight line 8. Conductivity estimates generated by NRG’s inversion -point located line data output from the inversion in ASEG-GDF2 format -point located line data output from the inversion in Geosoft GDB format -graphical (JPEG) multiplot conductivity sections and profiles for each line -georeferenced (PNG) conductivity sections (suitable for pseudo-3D display in a 2D GIS) -GoCAD™ S-Grid 3D objects (suitable for various 3D packages) -Curtain image conductivity sections (suitable 3D display in GA’s EarthSci) -grids generated from the NRG inversion in ER Mapper® format (layer conductivities, depth slices, elevation slices) -georeferenced TIFF images generated from the grids above with accompaning world files for georegerencing (layer conductivities, depth slices, elevation slices) -images generated from the grids above (layer conductivities, depth slices, elevation slices) 9. Conductivity estimates generated by Geoscience Australia's inversion -point located line data output from the inversion in ASEG-GDF2 format -graphical (JPEG) multiplot conductivity sections and profiles for each line -georeferenced (PNG) conductivity sections (suitable for pseudo-3D display in a 2D GIS) -GoCAD™ S-Grid 3D objects (suitable for various 3D packages) -Curtain image conductivity sections (suitable 3D display in GA’s EarthSci) -grids generated from the NRG inversion in ER Mapper® format (layer conductivities, depth slices, elevation slices) -georeferenced TIFF images generated from the grids above with accompaning world files for georegerencing (layer conductivities, depth slices, elevation slices) -images generated from the grids above (layer conductivities, depth slices, elevation slices) Directory structure ├── report ├── shapefiles ├── kml ├── line_data_dbdt ├── line_data_bfield ├── multiplots ├── contractor_inversion │   ├── multiplot_sections │   ├── earthsci │   │   └── Contractor-Inversion │   │   ├── jpeg │   │   ├── geometry │   │   └── MinEx_CRC_Mundi_AEM_Contractor-Inversion │   ├── georef_sections │   ├── gocad_sgrids │   ├── grids │   │   ├── layers │   │   ├── depth_slice │   │   └── elevation_slice │   ├── images │   │   ├── layers │   │   ├── layers_northwest_sunangle │   │   ├── depth_slice_northwest_sunangle │   │   ├── depth_slice │   │   ├── elevation_slice │   │   └── elevation_slice_northwest_sunangle │   ├── line_data │   │   ├── geosoft │   │   └── aseggdf2 │   └── georef_images │   ├── layers_northwest_sunangle │   ├── layers │   ├── depth_slice │   ├── depth_slice_northwest_sunangle │   ├── elevation_slice_northwest_sunangle │   └── elevation_slice ├── ga_inversion    ├── georef_sections    ├── gocad_sgrids    ├── grids    │   ├── depth_slice    │   ├── layers    │   └── elevation_slice    ├── images    │   ├── layers    │   ├── layers_northwest_sunangle    │   ├── depth_slice    │   ├── elevation_slice_northwest_sunangle    │   ├── elevation_slice    │   └── depth_slice_northwest_sunangle    ├── multiplot_sections    ├── line_data    ├── earthsci    │   └── GA-Inversion    │   ├── geometry    │   ├── jpeg    │   └── MinEx_CRC_Mundi_AEM_GA-Inversion    └── georef_images    ├── layers    ├── layers_northwest_sunangle    ├── depth_slice_northwest_sunangle    ├── depth_slice    ├── elevation_slice    └── elevation_slice_northwest_sunangle

<div>The Geoscience Australia magnetotellurics (MT) program collaborates with state and territory geological surveys, universities, and AuScope to acquire audio- (AMT), broadband- (BBMT), and long-period-MT (LPMT) data to help understand the electrical conductivity structure of the Australian continent.</div><div><br></div><div>This report collates the time-series and processed data, electrical conductivity models, and publications released for projects for which Geoscience Australia was the lead organisation, a collaborator, or an in-kind or financial supporter. For the most part, this report does not reference MT data, models or publications released by other parties for projects in which Geoscience Australia had no involvement. Please see Geoscience Australia’s AusLAMP, Exploring for the Future AusLAMP, and Regional Magnetotellurics webpages for more information.</div>

<div>The Australian wide airborne electromagnetic programme AusAEM stands as the largest survey of its kind aiming to cover the Australian continent at approximately 20 km line-spacing. It is transforming resource exploration, unveiling potential minerals and groundwater.&nbsp;</div><div><br></div><div>The open-access nature of AusAEM data and the modelling codes developed around it encourages collaboration between governments, industry, and academia, fostering a community focused on advancing geoscientific research and exploration.</div><div><br></div><div>Overall, the AusAEM program is an asset that can drive economic growth, support sustainable resource management, and enhance scientific understanding of Australia’s geological landscape.</div><div><br></div>

<div>Geoscience Australia’s Exploring for the Future program (EFTF) provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div><div><br></div><div>One main component of the EFTF program is the Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP), which is a collaborative national survey by federal government, state and territory governments, and research organizations since late 2013. The project acquires long-period magnetotelluric data on a half-degree grid spacing across Australia and provides first order electrical conductivity/resistivity structure of the Australian continental lithosphere. This reconnaissance dataset improves the understanding of lithospheric structures and tectonic evolution of Australian plate. It provides a framework and a bottom-up approach to identify newly resource potential regions for infill surveys and further study. The dataset also uses for assessment and prediction of geomagnetic storm’s nature hazards. </div><div><br></div><div>This data release contains a 3D resistivity model and site locations. The 3D model was derived from publicly available AusLAMP data in Australia (excluding western Australia). The model was projected to GDA94 MGA Zone 54 and was converted into SGrid/ASCII format and geo-referenced TIFF format.</div><div><br></div><div>We acknowledge the traditional custodians of the country where the data were collected. We also acknowledge the support provided by individuals and communities for land access and data acquisition, without whose cooperation these data could not have been collected. The 3D model was produced on the National Computational Infrastructure, which is supported by the Australian government.</div><div><br></div>

This airborne electromagnetic (AEM) dataset provides regional scale probabilistic inversion products from 141,000 line km of airborne electromagnetic (AEM) data from the AusAEM program. The two main benefits of a probabilistic inversion over a deterministic one are: - Loss of signal sensitivity at depth does not “fade to blue” by returning to the resistive deterministic reference model. - Ambiguous subsurface features become clearer when examining multiple probability percentiles. Further details are provided in the accompanying technical note. Conductivity products from the following surveys are available: - Frome 2011 - AusAEM 1 NT (2017) - AusAEM 1 QLD (2017) - AusAEM 2 Tranche 1 part (2019) - AusAEM 3 Eastern Resources Corridor (all 3 phases) - AusAEM 3 Western Resources Corridor (Kimberley, Central, Musgraves and South) The 10th, 50th and 90th and mean percentiles of log10 conductivity are provided in a variety of formats: - VTK structured grids - ASCII point clouds - ASEG-GDF2 files - GOCAD S-grids All products have been provided in the coordinate reference system (CRS) the original AEM data were provided in. The VTK unstructured grids are also provided in GDA94 geodetic longitude, latitude coordinates for ease of display in the same CRS.

<div>This data package contains interpretations of airborne electromagnetic (AEM) conductivity sections in the Exploring for the Future (EFTF) program’s Eastern Resources Corridor (ERC) study area, in south eastern Australia. Conductivity sections from 3 AEM surveys were interpreted to provide a continuous interpretation across the study area – the EFTF AusAEM ERC (Ley-Cooper, 2021), the Frome Embayment TEMPEST (Costelloe et al., 2012) and the MinEx CRC Mundi (Brodie, 2021) AEM surveys. Selected lines from the Frome Embayment TEMPEST and MinEx CRC Mundi surveys were chosen for interpretation to align with the 20&nbsp;km line-spaced EFTF AusAEM ERC survey (Figure 1).</div><div>The aim of this study was to interpret the AEM conductivity sections to develop a regional understanding of the near-surface stratigraphy and structural architecture. To ensure that the interpretations took into account the local geological features, the AEM conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This approach provides a near-surface fundamental regional geological framework to support more detailed investigations. </div><div>This study interpreted between the ground surface and 500&nbsp;m depth along almost 30,000 line kilometres of nominally 20&nbsp;km line-spaced AEM conductivity sections, across an area of approximately 550,000&nbsp;km2. These interpretations delineate the geo-electrical features that correspond to major chronostratigraphic boundaries, and capture detailed stratigraphic information associated with these boundaries. These interpretations produced approximately 170,000 depth estimate points or approximately 9,100 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for compliance with Geoscience Australia’s (GA) Estimates of Geological and Geophysical Surfaces (EGGS) database, the national repository for standardised depth estimate points. </div><div>Results from these interpretations provided support to stratigraphic drillhole targeting, as part of the Delamerian Margins NSW National Drilling Initiative campaign, a collaboration between GA’s EFTF program, the MinEx CRC National Drilling Initiative and the Geological Survey of New South Wales. The interpretations have applications in a wide range of disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. It is anticipated that these interpretations will benefit government, industry and academia with interest in the geology of the ERC region.</div>

<div>The interpretation of AusAEM airborne electromagnetic (AEM) survey conductivity sections in the Canning Basin region delineates the geo-electrical features that correspond to major chronostratigraphic boundaries, and captures detailed stratigraphic information associated with these boundaries. This interpretation forms part of an assessment of the underground hydrogen storage potential of salt features in the Canning Basin region based on integration and interpretation of AEM and other geological and geophysical datasets. A main aim of this work was to interpret the AEM to develop a regional understanding of the near-surface stratigraphy and structural geology. This regional geological framework was complimented by the identification and assessment of possible near-surface salt-related structures, as underground salt bodies have been identified as potential underground hydrogen storage sites. This study interpreted over 20,000 line kilometres of 20&nbsp;km nominally line-spaced AusAEM conductivity sections, covering an area approximately 450,000 km2 to a depth of approximately 500&nbsp;m in northwest Western Australia. These conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This interpretation produced approximately 110,000 depth estimate points or 4,000 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for Geoscience Australia’s Estimates of Geological and Geophysical Surfaces database, the national repository for formatted depth estimate points. Despite these interpretations being collected to support exploration of salt features for hydrogen storage, they are also intended for use in a wide range of other disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. Therefore, these interpretations will benefit government, industry and academia interested in the geology of the Canning Basin region.</div>

<div>The Magnetotelluric (MT) Sites database contains the location of sites where magnetotelluric (MT) data have been acquired by surveys. These surveys have been undertaken by Geoscience Australia and its predecessor organisations and collaborative partners including, but not limited to, the Geological Survey of New South Wales, the Northern Territory Geological Survey, the Geological Survey of Queensland, the Geological Survey of South Australia, Mineral Resources Tasmania, the Geological Survey of Victoria and the Geological Survey of Western Australia and their parent government departments, AuScope, the University of Adelaide, Curtin University and University of Tasmania. Database development was completed as part of Exploring for the Future (EFTF) and the database will utilised for ongoing storage of site information from future MT acquisition projects beyond EFTF. Location, elevation, data acquisition date and instrument information are provided with each site. The MT Sites database is a subset of tables within the larger Geophysical Surveys and Datasets Database. </div><div><br></div><div>The resource is accessible via the Geoscience Australia Portal&nbsp;(https://portal.ga.gov.au/), use Magnetotelluric as your search term to find the relevant data.</div>

<div>Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div><div><br></div><div>As part of Exploring for the Future (EFTF) program with contributions from the Geological Survey of Queensland, long-period magnetotelluric (MT) data for the Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP) were collected using Geoscience Australia's LEMI-424 instruments on a half-degree grid across northern and western Queensland from April 2021 to November 2022. This survey aims to map the electrical resistivity structures in the region. The processed data and 3D resistivity model have been released (https://dx.doi.org/10.26186/148633).&nbsp;</div><div><br></div><div>This data release contains site locations and acquired time series data at each site in two formats:</div><div>1. MTH5, a hierarchical data format. The open-source MTH5 Python package (https://github.com/kujaku11/mth5) was used to convert the recorded LEMI data into MTH5 format.</div><div>2. Text file (*.TXT). This is the original format recorded by the LEMI-424 data logger.</div><div><br></div><div>We acknowledge the traditional landowners, private landholders and national park authorities within the survey region, without whose cooperation these data could not have been collected.</div><div><br></div><div><strong>Data is available on request from clientservices@ga.gov.au - Quote eCat# 148978</strong></div><div><br></div>

<div>The Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP) is a collaborative national survey that acquires long-period magnetotelluric (MT) data on a half-degree grid spacing across Australia. This national scale survey aims to map the electrical conductivity/resistivity structure in the crust and upper mantle beneath the Australian continent, which provides significant additional information about Australia’s lithospheric architecture and geodynamic framework as well as valuable pre-competitive data for resource exploration.</div><div><br></div><div>Geoscience Australia (GA) in collaboration with the Geological Survey of Queensland acquired AusLAMP data in Queensland from May 2023 to July 2024. The funding of the survey was provided as part of the Queensland Government's Queensland Resource Industry Development Plan. The data were acquired using GA's LEMI-424 instruments and were processed using the Lemigraph software. The processed data contain transfer functions for each site in Electrical Data Interchange (EDI) format. </div><div><br></div><div>This data release includes site locations, processed data in EDI format, and time series data in the format of the LEMI-424 data logger and a hierarchical data format MTH5 (Peacock. J, et al. 2022, https://doi.org/10.1016/j.cageo.2022.105102). Time series data is available on request from clientservices@ga.gov.au - quote eCat#150000.</div><div><br></div><div>We acknowledge the traditional landowners, private landholders and national park authorities within the survey region, without whose cooperation these data could not have been collected.&nbsp;</div><div><br></div>