The service contains the Australian Coastal Geomorphology Landform Subtype Classifications, used to support a national coastal risk assessment. It describes the location and extent of landform subtypes identifiable at scales between 1:25,000 and 1:10,000. It also provides further detail to the Landform Type, with particular reference to feature stability (e.g. dune types) and mobility (e.g. channel types).

The service contains the Australian Coastal Geomorphology Landform Type Classifications, used to support a national coastal risk assessment. It describes the location and extent of landform types identifiable at scales between 1:250,000 and 1:25,000. It describes the landform types present in either erosional or dispositional environments.

The service contains the Australian Coastal Geomorphology Landform Type Classifications, used to support a national coastal risk assessment. It describes the location and extent of landform types identifiable at scales between 1:250,000 and 1:25,000. It describes the landform types present in either erosional or dispositional environments.

This report provides a description of the activities completed during the Outer Darwin Harbour Mapping Survey, from 28 May and 23 June 2015 on the RV Solander (Survey GA0351/SOL6187). This survey was a collaboration between Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and Department of Land Resource Management (Northern Territory Government) and the first of four surveys in the Darwin Harbour Seabed Habitat Mapping Program. This 4 year program (2014-2018) aims to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline information and developing thematic habitat maps that will underpin future marine resource management decisions. The program was made possible through funds provided by the INPEX-led Ichthys LNG Project to Northern Territory Government Department of Land Resource Management, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The specific objectives of the Outer Darwin Harbour Marine Survey GA0351/SOL6187 were to: 1. Obtain high resolution geophysical (bathymetry) data for outer Darwin Harbour, including Shoal Bay; 2. Characterise substrates (acoustic backscatter properties, grainsize, sediment chemistry) for outer Darwin Harbour, including Shoal Bay; and 3. Collect tidal data for the survey area. Data acquired during the survey included: 720 km2 multibeam sonar bathymetry and acoustic backscatter; 96 sampling stations collecting seabed sediments, underwater photography and video imagery and oceanographic information including tidal data and 54 sound velocity profiles.

The service contains the Australian Coastal Geomorphology Environments, used to support a national coastal risk assessment. It describes the location and extent primary geomorphological environments (both dispositional and erosional) present along the Australia coast and the processes acting on the features within.

This resource contains surface sediment data for Bynoe Harbour collected by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and Department of Land Resource Management (Northern Territory Government) during the period from 2-29 May 2016 on the RV Solander (survey SOL6432/GA4452). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Land Resource Management, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. The specific objectives of the survey were to: 1. Obtain high resolution geophysical (bathymetry) data for outer Darwin Harbour, including Shoal Bay; 2. Characterise substrates (acoustic backscatter properties, grainsize, sediment chemistry) for outer Darwin Harbour, including Shoal Bay; and 3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, underwater photography and video of grab sample locations and oceanographic information including tidal data and sound velocity profiles. This dataset comprises O2 consumption and CO2 production rates measured from core incubation experiments conducted on seabed sediments. A detailed account of the survey is provided in Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas W.A., Picard, K., Radke, L.C., Tran, M., Williams, D. and Whiteway, T., 2016. Bynoe Harbour Marine Survey 2017: GA4452/SOL6432 – Post-survey report. Record 2017/04. Geoscience Australia, Canberra. Thanks to the crew of the RV Solander for help with sample collection, Matt Carey, Craig Wintle and Andrew Hislop from the Observatories and Science Support at Geoscience Australia for technical support and Jodie Smith for reviewing the data. This dataset is published with the permission of the CEO, Geoscience Australia

Winds, waves and tides associated with storms are capable of causing severe damage to coastal property and infrastructure. Locations that are prone to erosion and inundation first require an accurate assessment of risk before deciding the most cost effective mitigation option. This research aims to produce probabilistic assessments of the coastal erosion and inundation risks associated with storms, particularly for coincident or clustered events, thereby helping to strengthen the resilience of coastal communities. Coastal erosion and inundation hazard is modeled in this study by simulations of realistic sequences of storm condition forcing (waves and tides) through a morphodynamic model to calculate return periods for maximum extent of shoreline retreat and storm demand. This approach of estimating erosion return periods is superior to the assumption that the single most energetic storm causes maximum erosion. The methodology is demonstrated at Old Bar, NSW and the metropolitan Adelaide beaches, SA, which are both currently erosion hotspots in Australia. These sites were selected to test the methodology for a span of geographic conditions in terms of storm climate and deep-water wave exposure, working towards developing this method into a transportable framework applicable to other coastal areas. Desktop and field assessments of each site were conducted to document geomorphic and sediment characteristics to inform shoreline modeling. Having established the historical framework at each location, multivariate statistical analysis of wave (buoy or hindcast models) and tides for peak storm events has allowed for the synthesis of realistic future conditions. This complex sequencing of cycling between accretion and erosion incorporating cross-shore and alongshore sediment transport has been estimated using a probabilistic shoreline evolution model. Here, model outputs for both sites are illustrated and used to access risk to infrastructure based on the most probable envelope of the shoreline. This study was undertaken for the Bushfire and Natural Hazards CRC project ‘Resilience to clustered disaster events on the coast - storm surge’. Presented at the 5th Young Coastal Scientists and Engineers Conference 2018

<p>This resource contains multibeam sonar backscatter data for Outer Darwin Harbour collected by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Northern Territory Government (Department of Land Resource Management) during the period from 28 May and 23 June 2015 on the RV Solander (survey SOL6187/GA0351). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Land Resource Management, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. The specific objectives of the survey were to: <p>1. Obtain high resolution geophysical (bathymetry) data for outer Darwin Harbour, including Shoal Bay; <p>2. Characterise substrates (acoustic backscatter properties, grainsize, sediment chemistry) for outer Darwin Harbour, including Shoal Bay; and <p>3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, underwater photography and video of grab sample locations and oceanographic information including tidal data and sound velocity profiles. This dataset comprises multibeam backscatter data. <p>A detailed account of the survey is provided in: <p>Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas, W.A., Potter, A., Radke, L.C., Tran, M., Williams, D. and Whiteway, T., 2015. Outer Darwin Harbour Marine Survey 2015: GA0351/SOL6187 Post-survey report. Record 2016/008. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2016.008

The East Australian Current (EAC) onshore encroachment drives coastal upwelling and shelf circulations, changes slope-shelf bio-physical dynamics, and consequently exerts significant influence on coastal marine ecosystem along the south-eastern Australian margin. The EAC is a highly dynamic eddy-current system which exhibits high-frequency intrinsic fluctuations and eddy shedding. As a result, low-frequency variability in the EAC is usually overshadowed and rarely detectable. For decades, despite many efforts into the ocean current observations, the seasonality of EAC’s shoreward intrusion remains highly disputable. In this study, for the first time we use a long-term (26 years) remotely sensed AVHRR Sea Surface Temperature (SST) dataset spanning 1992-2018 to map the EAC off the coast of northern New South Wales (NSW), between 28°S - 32.5°S. A Topographic Position Index (TPI) image processing technique was applied to conduct the quantitative mapping. The mapping products have enabled direct measurement (area and distance) of the EAC’s shoreward intrusion. Subsequent spatial and temporal analyses have shown that the EAC move closer to the coast in austral summer and autumn than in austral winter, with the mean distance-to-coast ~6 km shorter and occupying the shelf area ~12% larger. This provides quantitative and direct evidence of the seasonality of the EAC’s shoreward intrusion. Such seasonal migration pattern of the EAC thus provides new insights into the seasonal upwelling and shelf circulations previously observed in this region. As a result, we were able to confirm that the EAC is a driving force of the seasonal ocean dynamics for the northern NSW coast.

Bathymetry is the study and mapping of the sea floor. It involves obtaining measurements of the depth of the ocean and is the equivalent to mapping topography on land. Bathymetric data is collected in multiple ways: 1. Satellite data can be used to produce maps showing general features over a large area at low resolution. Satellite altimetry measures the height of the ocean surface. If there are hills/mountains on the sea floor, the gravitational pull around that area will be greater and hence the sea surface will bulge. This measurement can be used to show where the seafloor is higher, and this can be used to produce maps showing general features over a large area at low resolution. 2. Single beam echosounders produce a single line of depth points directly under the equipment. These measurements are usually made while a vessel is moving to identify general sea floor patterns and/or schools of fish. 3. Equipment that captures swathes of data by acquiring multiple depth points in each area, such as multibeam echosounders (or swath echosounders) and airborne laser measurements (LADS). These datasets are very high resolution, with data down to better than one metre accuracy. This bathymetry dataset is a collection of singlebeam data sourced from seismic navigation lines, multibeam data, satellite and LADS data acquired by GA and by other government and non-government agencies.