The inboard areas of the Otway Basin, particularly the Shipwreck Trough, are well explored and a petroleum-producing province. However, outboard in water depths greater than 500 m, the basin is underexplored with distant well control and sparse 2D reflection seismic data coverage. The presence of a successful petroleum province onshore and in shallow waters raises the question as to whether these plays may extend further outboard into the deep-water areas. In the deep-water area, structural complexity and poor imaging of events in the legacy seismic data have resulted in interpretation uncertainty and consequentially a high-risk profile for explorers. The 2020 Otway Basin seismic program acquired over 7000-line km of 2D reflection seismic data across the deep-water Otway Basin. In addition, over 10 000 km of legacy 2D seismic data were reprocessed to improve the tie between the inboard wells and the new seismic grid. This new dataset provides the first clear insight into the structural and stratigraphic framework of this frontier area, including better imaging of the sedimentary section and the lower crust, increased structural resolution and improved calibration of the outboard seismic reflectors via ties to the inboard wells. Interpretation of the new data has led to an improved assessment of the structural elements and the extension of regional supersequences into the deep-water areas. These refinements have been used as input into petroleum systems modelling work and will provide a foundation for future work to understand petroleum prospectivity, including the distribution of source, reservoir and seal facies. Presented at 2021 Australian Petroleum Production & Exploration Association (APPEA)

In association with the OB2020 seismic survey, over 8,200 line kilometre of gravity and magnetic data were acquired. These data were subsequently merged with existing satellite data to produce merged grids at 1000m grid cell size. Several enhancement processing techniques were applied to these magnetic and gravity data to better highlight buried features within the Otway Basin. The merged input data from the survey and the enhanced products in this release provide valuable information on the geometry and spatial extent of igneous rocks in the deep-water basin. The distribution of these rocks is critical to the understanding of the petroleum systems and therefore the hydrocarbon prospectivity of the area. This data package contains: 1) A metadata statement document 2) Shapefiles of the magnetic and gravity line data from the OBSP survey 3) ASCII xyz grids of the OBSP and merged grids with public domain data 4) Georeferenced (GeoTIFF) images of the survey and merged grids 5) Gravity and Magnetic data processing reports from the OBSP survey

Geoscience Australia currently uses two commercial petroleum system modelling software packages, PetroMod https://www.software.slb.com/products/petromod and Zetaware http://www.zetaware.com, to undertake burial and thermal history modelling on wells in Australian sedimentary basins. From the integration of geological (age-based sedimentary packages, uplift and erosional events), petrophysical (porosity, permeability, and thermal conductivity) and thermal (downhole temperature, heat flow, vitrinite reflectance, and Tmax) input data, to name the most significant, a best-fit model of the time-temperature history is generated. Since the transformation of sedimentary organic matter (kerogen) into petroleum (oil and gas) is a chemical reaction, it is governed by chemical kinetics i.e. time and temperature (in the geological setting, pressure is of secondary importance). Thus, the use of chemical kinetics associated with a formation-specific, immature potential source rock (where available) from the basin of interest is considered a better practical approach rather than relying on software kinetic defaults, which are generally based on the chemical kinetics determined experimentally on Northern Hemisphere organic matter types. As part of the Offshore Energy Systems program hydrocarbons from the Lower Cretaceous Eumeralla Formation were selected where available from onshore wells; compositional kinetics (1-, 2-, 4- and 14-component (phase) kinetics) were undertaken by GeoS4, Germany. The phase kinetics approach is outlined in Appendix 1. This report provides the compositional kinetics for potential source rocks from the Lower Cretaceous Otway Group, Otway Basin, Australia. The kinetic data were used in the offshore petroleum system modelling reported in Schenk et al. (2021).

Reports of bitumen stranding on the ocean beaches of southern Australia date back to the early days of European settlement. Previous investigations have shown that this ‘coastal bitumen’ comprises three categories of stranded petroleum: waxy bitumen, asphaltite and oil slicks. All three varieties are physically and chemically distinct from each other, and bear no geochemical resemblance to any indigenous Australian crude oil. This study focuses on the most common variety, waxy bitumen, which accounted for 90% of the strandings on six South Australian beaches repeatedly surveyed during 1991–1992. Geochemical analysis of 96 individual specimens collected from these survey sites and other beaches in South Australia and western Victoria has shown them to be variously weathered high-wax crude oils of paraffinic to aromatic-intermediate bulk composition. Elemental, isotopic and biomarker differences allow their assignment to at least five oil families with inferred source facies that range from deep freshwater lacustrine through paludal and deltaic to euxinic marine, possibly deposited within different sedimentary basins. Family 1, 2 and 3 waxy bitumens all contain biomarkers derived from the freshwater alga Botryococcus sp. and tropical angiosperms (notably dipterocarps). Similar biomarker assemblages are unknown in Australian sedimentary basins but are common in Cenozoic crude oils and source rocks throughout western Indonesia. Family 4 waxy bitumens lack these biomarkers, but do contain dinosterane and 24-n-propylcholestane, indicative of a marine source affinity, while the carbon isotopic signatures and high pristane/phytane (Pr/Ph) ratios of Family 5 waxy bitumens are consistent with their origin from coal-rich source rocks deposited in fluvial to deltaic sedimentary successions. The majority of these waxy bitumens represent an oceanic influx of non-indigenous, Southeast Asian crude oils carried into the waters of southern Australia by the Leeuwin Current. Although they are likely to originate from natural seepage within the Indonesian Archipelago, it is unknown whether the parent oils emanate from submarine seeps or from inland seepages which are then carried to the sea by rivers. The common practice of tanker cleaning operations in the Java and Banda seas may augment the supply of natural bitumen to the beaches of Australia.

<div>A regional hydrocarbon prospectivity assessment has been undertaken of the offshore Otway Basin by the Offshore Energy Systems Section. This program was designed to produce pre-competitive information to assist with the evaluation of the hydrocarbon resource potential of the offshore Otway Basin and attract exploration investment to Australia. The inboard part of the basin is an established hydrocarbon province with onshore and shallow-water offshore discoveries, whereas the outboard deep-water region, where water depths range from 500 to 6300&nbsp;m, is comparatively underexplored and considered a frontier area.</div><div><br></div><div>As part of this program, molecular and noble gas isotopic analyses were undertaken by Smart Gas Sciences, under contract to Geoscience Australia on available gas samples from the Waarre Formation in the Shipwreck Trough in the offshore eastern Otway Basin, with data from these analyses being released in this report. This report provides additional compositional information for gases in the Waarre Formation reservoirs and builds on previously established gas-gas correlations and gas-oil correlations. Noble gas isotopic data can be used in conjunction with carbon and hydrogen isotopic data to determine the origin of both inorganic and organic (hydrocarbon) gases. This information can be used in future geological programs to determine the source and distribution of hydrogen and helium in natural gases and support acreage releases by the Australian Government.</div><div><br></div><div><br></div>

Geoscience Australia has undertaken a regional seismic mapping study of the offshore Otway Basin extending across the explored inner basin to the frontier deep-water region. Seismic interpretation covers over 18000 line-km of new and reprocessed data acquired in the 2020 Otway Basin seismic program and over 40000 line-km of legacy 2D seismic data. We present new basin-scale isochore maps that show the distribution of the Cretaceous depocentres. Maps for the Lower Cretaceous Crayfish and Eumeralla supersequences, together with those recently published for the Upper Cretaceous Shipwreck and Sherbrook Supersequences, completes the set of isochore maps for the main tectonostratigraphic basin intervals. Mapping of basement involved faults has revealed structural fabrics that have influenced depocentre development. The tectonostratigraphic development of depocentres and maps of deep crustal units delineate crustal thinning trends related to late Cretaceous extension phases. This work highlights the need to review and update structural elements. For example, the boundary between the Otway and Sorell basins is now geologically constrained. The refinements to the tectonostratigraphic evolution of the Otway Basin presented here have important implications for the distribution and potential maturity of petroleum systems, especially with regard to heat flow associated with crustal extension. Presented at the 2024 Australian Energy Producers Conference & Exhibition (AEP) (https://energyproducersconference.au/conference/)

Over 8,200 line kilometres of gravity and magnetic data, acquired during the 2020 Otway Basin Seismic Program (OBSP), were combined with public domain survey and satellite data to produce seamless maps of the NW-SE trending deep-water Otway Basin. These data provide valuable information on the geometry and spatial extent of igneous rocks in the deep-water basin. While the top of basement can effectively be imaged from seismic reflection datasets onshore in the Otway Basin, it remains problematic in parts of the deep-water offshore region due to variable seismic data quality. Modelling of the magnetic line data provides an estimate of the depth to the top of basement, an important interface for understanding hydrocarbon prospectivity because it plays a key role in characterising the tectonic evolution of the basin, and thus the thermal maturation history of hydrocarbons. Magnetic modelling was performed using a profile-based curve matching technique producing a depth estimate to the top of the magnetic body that is assumed to be the top of the basement. However, this assumption is flawed where there are volcanic or igneous intra-sedimentary rocks in the basin, as is the case for the Otway Basin where the interpretation of seismic reflection data shows highly reflective events corresponding to igneous features. In most parts of the basin, the modelling results show two layers: a shallow layer (depths < 1000m) corresponding to near surface volcanics, and a deeper layer (depths > 1000m) attributed to the top of the magnetic basement. Magnetic basement shows some similarities with basement picked on seismic reflection data, though in some areas the magnetic basement is shallower. The results also show that the depth to basement is not well resolved in areas with abundant intra-sedimentary igneous rocks. Further investigation is needed in such areas. Presented at the 2024 Australian Society of Exploration Geophysicists (ASEG) Discover Symposium

The Otway Basin is a broadly northwest-southeast trending basin and forms part of a rift system that developed along Australia’s southern margin. It represents an established hydrocarbon province with mostly onshore and shallow-water offshore discoveries. However, the outboard deep-water Otway Basin, with water depths up to 6300 m, is comparatively underexplored and can be considered a frontier area. Following the completion of a basin-wide seismic depth-imaging program (Part 1; Lee et al 2021) and insights from the revised seismic interpretation (Part 2; Karvelas et al. 2021), we have developed a comprehensive petroleum system modelling (PSM) study by integrating these data and findings (Part 3). Together the studies have resulted in an improved understanding of the hydrocarbon prospectivity of the deep-water areas of the basin. Given the sparsity of data outboard, almost all legacy petroleum system modelling studies have been focused either on the onshore or shallow-water areas of the basin and primarily on their thick Lower Cretaceous depocentres. The limitations of legacy seismic datasets resulted in a high degree of uncertainty in the derivative interpretations used as input into PSM studies. In addition, the paucity and poor quality of data in the deep-water area reduced confidence in the understanding of the basin evolution and spatial distribution of depositional environments through time. The newly acquired 2D seismic survey and reprocessed legacy data, with calibration via several wells across the basin, has improved confidence in our understanding of the tectonostratigraphic evolution of the basin (Part 2; Karvelas et al. 2021). The study presented herein integrates products from the work in Part 2 into a petroleum system model with the primary objective being to better understand the petroleum systems across the deep-water Otway Basin.

An elemental chemostratigraphic study of the offshore Otway basin has been undertaken as part of a collaboration between Chemostrat and Geoscience Australia (GA). The main aim of which is to better constrain the sequence boundaries of, and within, the Sherbrook Supersequence. This comprehensive study includes the elemental analysis of 1185 cuttings samples from the Sherbrook Supersequence (and overlying stratigraphy) in 13 wells, located offshore Otway Basin. Sampling of cuttings for this project was particularly challenging as many of the targeted wells have a paucity of material available for destructive analysis. Lithological and well log interpretation in the basin is often inadequate for constraint of sequence boundaries. Nonetheless the use of Inductively Coupled Plasma-Optical Emission Spectrometry and Mass Spectrometry (ICP-OES and MS) analysis was undertaken to complete a regional elemental chemostratigraphic study of the Sherbrook Supersequence, Otway Basin. The resultant chemostratigraphic framework, with nomenclature adapted from Forbes et al (2020) comprises of two chemostratigraphic sequences, eight chemostratigraphic packages and seventeen chemostratigraphic units. It is important to note that in some wells the chemostratigraphic correlation differs extensively from the lithostratigraphy, highlighting areas for closer examination. From the 13 wells analysed at least three, Crayfish-1A, Copa-1 and Breaksea Reef-1, indicate necessary changes to markers for LC2 (base Sherbrook). Additionally, within the Sherbrook Supersequence, there is scope for correlation between wells despite their separation, and seismic ties can now be better constrained. Presented at the Australian Energy Producers (AEP) Conference & Exhibition

During 2021–2024 Geoscience Australia conducted regional seismic mapping across the offshore Otway Basin that extended into the frontier deep-water region. This work was part of a broader pre-competitive study undertaken in support of petroleum exploration. Seismic horizons and faults were interpreted on three regional data sets, including: over 18 000 line-km of new and reprocessed data compiled for the 2020 offshore Otway Basin seismic program; over 40 000 line-km of legacy 2D seismic data; and the Otway 3D Megamerge dataset. This digital dataset (publication date 9 September 2024) updates and replaces a previously released dataset (publication date 16 May 2022). This updated dataset includes 8 surface grids and 11 isochron grids generated from the following seismic horizons (in ascending stratigraphic order); MOHO (Mohorovičić discontinuity), TLLCC (top laminated lower continental crust), Base (base Crayfish Supersequence), EC2 (base Eumeralla Supersequence), LC1 (base Shipwreck Supersequence), LC1.2 (base LC1.2 Sequence), LC2 (base Sherbrook Supersequence), and T1 (base Wangerrip Supersequence). Fault polygons created for all surfaces (except for MOHO, TLLCC, and LC1.2) are also included in the dataset. Maps generated from the dataset depict deep-water Cretaceous depocentres, and trends in crustal thinning and rifting during the Cretaceous. This revised dataset has underpinned updates to regional structural elements, including a revision of the boundary between the Otway and Sorell basins.