<div>The Abbot Point to Hydrographers Passage bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the RV Escape during the period 6 Oct 2020 – 16 Mar 2021. This was a contracted survey conducted for the Australian Hydrographic Office by iXblue Pty Ltd as part of the Hydroscheme Industry Partnership Program. The survey area encompases a section of Two-Way Route from Abbot Point through Hydrographers Passage QLD. Bathymetry data was acquired using a Kongsberg EM 2040, and processed using QPS QINSy. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

<p>This resource contains multibeam backscatter data for Bynoe Harbour collected by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Northern Territory Government (Department of Environment and Natural Resources) during the period between 3 and 27 May 2016 on the RV Solander (survey SOL6187/GA0351). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Environment and Natural Resources, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. <p>The specific objectives of the survey were to: <p>1. Obtain high resolution geophysical (bathymetry) data for Bynoe Harbour; <p>2. Characterise substrates (acoustic backscatter properties, grainsize, sediment chemistry) for Bynoe Harbour; and <p>3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, underwater photography and video of grab sample locations and oceanographic information including tidal data and sound velocity profiles. <p>This dataset comprises multibeam backscatter data. A detailed account of the survey is provided in: Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas W.A., Picard, K., Radke, L.C., Tran, M., Williams, D. and Whiteway, T. 2016. Bynoe Harbour Marine Survey 2016: GA4452/SOL6432 – Post-survey report. Record 2017/04. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2017.004.

<div>The Lombadina Point Reference Surfaces bathymetry survey was acquired for the Australian Hydrographic Office (AHO) on 28 Nov 2022. This surface was created from a contracted national reference survey at Lombadia Point WA, collected for the purpose of calibrating multibeam echosounders.&nbsp;It was conducted for the Australian Hydrographic Office as part of the Hydroscheme Industry Partnership Program, acquired using Kongsberg EM2040P MKII, and processed using QPS Qimera and Caris HIPS & SIPS. A grid in 0.5m resolution is provided for the surveyed site within this survey area in MSL, LAT and Ellipsoid vertical datum. The dataset was then exported as a 0.5m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div> Temporarily removed from External publication 9/01/2024 on request of N. Lennard.

<p>This resource contains multibeam bathymetry data for Bynoe Harbour collected by Geoscience Australia (GA), the Australian Institute of Marine Science (AIMS) and the Northern Territory Government (Department of Environment and Natural Resources) during the period between 3 and 27 May 2016 on the RV Solander (survey SOL6432/GA04452). This project was made possible through offset funds provided by INPEX-led Ichthys LNG Project to Northern Territory Government Department of Environment and Natural Resources, and co-investment from Geoscience Australia and Australian Institute of Marine Science. The intent of this four year (2014-2018) program is to improve knowledge of the marine environments in the Darwin and Bynoe Harbour regions by collating and collecting baseline data that enable the creation of thematic habitat maps that underpin marine resource management decisions. <p>The specific objectives of the survey were to: <p>1. Obtain high resolution geophysical (bathymetry) data for Bynoe Harbour; <p>2. Characterise substrates (acoustic backscatter properties, grainsize, sediment chemistry) for Bynoe Harbour; and <p>3. Collect tidal data for the survey area. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; physical samples of seabed sediments, underwater photography and video of grab sample locations and oceanographic information including tidal data and sound velocity profiles. <p>This dataset comprises multibeam bathymetry data. A detailed account of the survey is provided in: Siwabessy, P.J.W., Smit, N., Atkinson, I., Dando, N., Harries, S., Howard, F.J.F., Li, J., Nicholas W.A., Picard, K., Radke, L.C., Tran, M., Williams, D. and Whiteway, T. 2016. Bynoe Harbour Marine Survey 2016: GA4452/SOL6432 – Post-survey report. Record 2017/04. Geoscience Australia, Canberra. http://dx.doi.org/10.11636/Record.2017.004.

<div>The Shark Bay Bathymetry was derived form a time series of multispectral satellite data from the Copernicus Sentinel-2 satellite sensor, acquired between January 2017 and December 2020. This dataset was produced by the University of Western Australia to support student research projects. The dataset encompasses the Shark Bay in Western Australia. These critical geospatial data layers provide the essential environmental baseline information for the long-term monitoring and management. Mapping the shallow water zone is of importance both from an environmental and socioeconomic perspective. Bathymetry data was processed following the workflow of Lebrec et al. (2021) [https://doi.org/10.5194/essd-13-5191-2021]. This dataset is not to be used for navigational purposes. This dataset is published with the permission of the CEO, Geoscience Australia.</div>

<div>The Broome Reference Surfaces bathymetry survey was acquired for the Australian Hydrographic Office (AHO) during the period 25 Sep 2020 - 26 Sep 2020. This surface was created from a contracted national reference survey between Gantheaume Point and Talboys Rock, Broome WA, collected for the purpose of calibrating multibeam echosounders.&nbsp;It was conducted for the Australian Hydrographic Office as part of the Hydroscheme Industry Partnership Program, acquired using Kongsberg EM 2040D, and processed using Caris HIPS & SIPS. A grid in 0.5m resolution is provided for the surveyed site within this survey area in MSL, LAT and Ellipsoid vertical datum. The dataset was then exported as a 0.5m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

<div>The North-East Beagle Gulf and Clarence Strait bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Offshore Guardian during the period 1 May 2021 – 13 Jul 2021. This was a contracted survey conducted for the Australian Hydrographic Office by Guardian Geomatics as part of the Hydroscheme Industry Partnership Program. The survey area encompases an area in North-East Beagle Gulf and Clarence Strait, Northern Territory. Bathymetry data was acquired using a Kongsberg EM2040 07 MK II, and processed using Caris Hips & Sips processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

<div>The Hay Point to Hydrographers Passage Bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Sea Ranger and MV Brynda during the period 13 August- 09 November 2022. This is a contracted survey conducted for the Australian Hydrographic Office by EGS as part of the Hydroscheme Industry Partnership Program (HIPP). </div><div>The survey area encompases Hay Point to Hydrographers Passage in Queensland. Bathymetry data was acquired using a Kongsberg EM2040D and Kongsberg EM 2040C systems and processed using QPS Qimera processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

<div>The Adelaide Reference Surfaces bathymetry survey was acquired for the Australian Hydrographic Office (AHO) during the period 4 Sep 2020 – 16 Sep 2020. This surface was created from a contracted national reference survey in Gulf St Vincent SA, collected for the purpose of calibrating multibeam echosounders.&nbsp;It was conducted for the Australian Hydrographic Office as part of the Hydroscheme Industry Partnership Program, acquired using Kongsberg EM 2040 multibeam echosounder and Kongsberg EA440 singlebeam echosounder, and processed using Caris HIPS &amp; SIPS. Separate grids in 1m resolution are provided for the 2 surveyed sites within this survey area in MSL, LAT and Ellipsoid vertical datum. The dataset was then exported as a 1m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>

<div>The Approaches to Newcastle bathymetry survey was acquired for the Australian Hydrographic Office (AHO) onboard the MV Offshore Guardian during the period 4 Dec 2020 – 15 Jan 2021. This was a contracted survey conducted for the Australian Hydrographic Office by Guardian Geomatics as part of the Hydroscheme Industry Partnership Program. The survey area encompases an area east of Approaches to Newcastle NSW. Bathymetry data was acquired using a Kongsberg EM 2040-07, and processed using Caris Hips & Sips processing software. The dataset was then exported as a 30m resolution, 32 bit floating point GeoTIFF grid of the survey area.</div><div>This dataset is not to be used for navigational purposes.</div>