From 1 - 7 / 7
  • The discovery of strategically located salt structures, which meet the requirements for geological storage of hydrogen, is crucial to meeting Australia’s ambitions to become a major hydrogen producer, user and exporter. The use of the AusAEM airborne electromagnetic (AEM) survey’s conductivity sections, integrated with multidisciplinary geoscientific datasets, provides an excellent tool for investigating the near-surface effects of salt-related structures, and contributes to assessment of their potential for underground geological hydrogen storage. Currently known salt in the Canning Basin includes the Mallowa and Minjoo salt units. The Mallowa Salt is 600-800 m thick over an area of 150 × 200 km, where it lies within the depth range prospective for hydrogen storage (500-1800 m below surface), whereas the underlying Minjoo Salt is generally less than 100 m thick within its much smaller prospective depth zone. The modelled AEM sections penetrate to ~500 m from the surface, however, the salt rarely reaches this level. We therefore investigate the shallow stratigraphy of the AEM sections for evidence of the presence of underlying salt or for the influence of salt movement evident by disruption of near-surface electrically conductive horizons. These horizons occur in several stratigraphic units, mainly of Carboniferous to Cretaceous age. Only a few examples of localised folding/faulting have been noted in the shallow conductive stratigraphy that have potentially formed above isolated salt domes. Distinct zones of disruption within the shallow conductive stratigraphy generally occur along the margins of the present-day salt depocentre, resulting from dissolution and movement of salt during several stages. This study demonstrates the potential AEM has to assist in mapping salt-related structures, with implications for geological storage of hydrogen. In addition, this study produces a regional near-surface multilayered chronostratigraphic interpretation, which contributes to constructing a 3D national geological architecture, in support of environmental management, hazard mapping and resource exploration. <b>Citation: </b>Connors K. A., Wong S. C. T., Vilhena J. F. M., Rees S. W. & Feitz A. J., 2022. Canning Basin AusAEM interpretation: multilayered chronostratigraphic mapping and investigating hydrogen storage potential. In: Czarnota, K (ed.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, https://dx.doi.org/10.26186/146376

  • All commercially produced hydrogen worldwide is presently stored in salt caverns. Through the Exploring for the Future program, Geoscience Australia is identifying and mapping salt deposits in Australia that may be suitable for hydrogen storage. The only known thick salt accumulations in eastern Australia are found in the Boree Salt of the Adavale Basin in central Queensland, and represent potentially strategic assets for underground hydrogen storage. The Boree Salt consists predominantly of halite that is up to 555 m thick in some wells. In 2021, Geoscience Australia contracted Intrepid Geophysics to develop a 3D geological model of the Adavale Basin, using well data and 2D seismic interpretation and focussing on the Boree Salt deposit. The 3D model has identified three main salt bodies that may be suitable for salt cavern construction and hydrogen storage. Further work and data acquisition are required to fully assess the suitability of these salt bodies for hydrogen storage. Disclaimer Geoscience Australia has tried to make the information in this product as accurate as possible. However, it does not guarantee that the information is totally accurate or complete. Therefore, you should not solely rely on this information when making a commercial decision. This dataset is published with the permission of the CEO, Geoscience Australia.

  • <div>Hydrogen is expected to be a key driver of the globe’s transition to net zero. &nbsp;</div><div>Australia is investing significantly, across government and business, as it pushes towards scalable and cost-effective hydrogen production. The Australian Government wants to develop and cultivate the domestic hydrogen industry to become a hydrogen superpower – exporting clean energy across the globe. With current expectations that the hydrogen industry could add an additional $50 billion to Australia’s GDP, the industry presents a great opportunity to support economic growth as Australia transitions to net zero (DCCEEW, 2022a). &nbsp;</div><div>However, much of hydrogen production remains unproven commercially at the necessary scale and there are still a lot of unknowns about how to effectively build this industry in Australia. &nbsp;</div><div>Geoscience Australia (GA), as Australia’s national geoscience agency, is undertaking precompetitive geoscience data and analysis to support the hydrogen sector. This includes conducting research and data analysis to lower the risk of exploration for natural hydrogen and salt caverns, the development of tools to support decision-making by hydrogen producers, and economic assessments into the feasibility of green steel production.&nbsp;</div><div>The economic benefits of precompetitive geoscience data and analysis for the hydrogen industry Deloitte Access Economics (DAE) was engaged to identify, quantify and, where possible, monetise the economic benefits of GA’s work across four case studies. &nbsp;</div><div>As hydrogen is a nascent sector, there is little to no current commercial activity. This limits the ability to estimate the full extent of the economic benefits of GA’s work. As the hydrogen industry matures over the next five years, we expect more economic benefits will be realised, particularly as tenement uptake translates into hydrogen production. &nbsp;</div><div>Through analysis of four current case studies, it is evident that GA’s work is providing clarity and confidence to support large-scale investment decisions. Overall, GA’s work has the potential to deliver Australia an important competitive advantage and fast-track development of the local hydrogen industry. &nbsp;</div><div>Hydrogen Economic Fairways Tool (HEFT): found to enable timely and informed decision-making and lower the risk of investing in, and entering, the hydrogen industry. Specifically, the tool provides significant efficiencies for hydrogen companies, saving $30,000 to $50,000 per prospective project in time and reduced due diligence costs. &nbsp;</div><div>GA research on natural hydrogen: expected to have stimulated tenement uptake activity in South Australia, to explore for natural hydrogen. If even just one tenement was taken up as a result of GA’s data, it could be associated with economic benefits of around $22 million to the hydrogen industry, over a ten-year period (2022-23 to 2031-32). &nbsp;</div><div>GA research on salt cavern storage: hydrogen storage can be prohibitively expensive, which can stall the development of hydrogen projects. GA’s research highlighted salt caverns as a cheaper alternative. If just one industry player switched from conventional gas storage to salt caverns, salt cavern storage could lower the cost by $208 million, over ten years. In addition, salt cavern storage could avoid the loss of $4.1 million worth of hydrogen over the same period (2022-23 to 2031-32). &nbsp;</div><div>The techno-economic assessment of green steel production: GA’s research identified cost-effective locations for green steel production, which could be competitive with conventional steel at a carbon price of $148 per tonne of carbon dioxide&nbsp;</div><div><br></div><div><br></div>

  • <div>Airborne electromagnetics surveys are at the forefront of addressing the challenge of exploration undercover. They have been essential in the regional mapping programmes to build Australia's resource potential inventory and provide information about the subsurface. In collaboration with state and territory geological surveys, Geoscience Australia (GA) leads a national initiative to acquire AEM data across Australia at 20 km line spacing, as a component of the Australian government Exploring for The Future (EFTF) program. Regional models of subsurface electrical conductivity show new undercover geological features that could host critical mineral deposits and groundwater resources. The models enable us to map potential alteration and structural zones and support environmental and land management studies. Several features observed in the AEM models have also provided insights into possible salt distribution analysed for its hydrogen storage potential. The AusAEM programme is rapidly covering areas with regional AEM transects at a scale never previously attempted. The programme's success leans on the high-resolution, non-invasive nature of the method and its ability to derive subsurface electrical conductivity in three dimensions – made possible by GA's implementation of modern high-performance computing algorithms. The programme is increasingly acquiring more AEM data, processing it, and working towards full national coverage.</div> This Abstract was submitted/presented to the 2023 Australian Exploration Geoscience Conference 13-18 Mar (https://2023.aegc.com.au/)

  • <div>The interpretation of AusAEM airborne electromagnetic (AEM) survey conductivity sections in the Canning Basin region delineates the geo-electrical features that correspond to major chronostratigraphic boundaries, and captures detailed stratigraphic information associated with these boundaries. This interpretation forms part of an assessment of the underground hydrogen storage potential of salt features in the Canning Basin region based on integration and interpretation of AEM and other geological and geophysical datasets. A main aim of this work was to interpret the AEM to develop a regional understanding of the near-surface stratigraphy and structural geology. This regional geological framework was complimented by the identification and assessment of possible near-surface salt-related structures, as underground salt bodies have been identified as potential underground hydrogen storage sites. This study interpreted over 20,000 line kilometres of 20&nbsp;km nominally line-spaced AusAEM conductivity sections, covering an area approximately 450,000 km2 to a depth of approximately 500&nbsp;m in northwest Western Australia. These conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This interpretation produced approximately 110,000 depth estimate points or 4,000 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for Geoscience Australia’s Estimates of Geological and Geophysical Surfaces database, the national repository for formatted depth estimate points. Despite these interpretations being collected to support exploration of salt features for hydrogen storage, they are also intended for use in a wide range of other disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. Therefore, these interpretations will benefit government, industry and academia interested in the geology of the Canning Basin region.</div>

  • All commercially produced hydrogen worldwide is presently stored in salt caverns. The only known thick salt accumulations in eastern Australia are found in the Boree Salt of the Adavale Basin in central Queensland. The Boree Salt consists predominantly of halite and is considered to be suitable for hydrogen storage. In 2021, Geoscience Australia contracted Intrepid Geophysics to perform 3D geological modelling of the Adavale Basin, particularly interested in modelling the Boree Salt deposit in the region. The developed 3D model has identified three main salt bodies of substantial thicknesses (up to 555 m) that may be suitable for salt cavern construction and hydrogen storage. These are the only known salt bodies in eastern Australia and represent potentially strategic assets for underground hydrogen storage. However, there are still unknowns with further work and data acquisition required to fully assess the suitability of these salt bodies for hydrogen storage. Geoscience Australia has transformed Intrepid Geophysics' Adavale Basin 3D Modelling dataset into Petrel. This Petrel dataset is part of Geoscience Australia's Exploring for the Future program. Files including a readme file and Petrel dataset that consists of formation surfaces, faults, borehole information and formation tops. Disclaimer: Geoscience Australia has tried to make the information in this product as accurate as possible. However, it does not guarantee that the information is totally accurate or complete. Therefore, you should not solely rely on this information when making a commercial decision. This dataset is published with the permission of the CEO, Geoscience Australia.

  • All commercially produced hydrogen worldwide is presently stored in salt caverns. In eastern Australia, the only known thick salt accumulations are found in the Boree Salt of the Adavale Basin in central Queensland. Although the number of wells penetrating the basin is limited, salt intervals up to 555 m thick have been encountered. The Boree Salt consists predominantly of halite and is considered to be suitable for hydrogen storage. Using well data and historical 2D seismic interpretations, we have developed a 3D model of the Adavale Basin, particularly focussing on the thicker sections of the Boree Salt. Most of the salt appears to be present at depths greater than 2000 m, but shallower sections are found in the main salt body adjacent to the Warrego Fault and to the south at the Dartmouth Dome. The preliminary 3D model developed for this study has identified three main salt bodies that may be suitable for salt cavern construction and hydrogen storage. These are the only known large salt bodies in eastern Australia and therefore represent potentially strategic assets for underground hydrogen storage. There are still many unknowns, with further work and data acquisition required to fully assess the suitability of these salt bodies for hydrogen storage. Recommendations for future work are provided. <b>Citation:</b> Paterson R., Feitz A. J., Wang L., Rees S. & Keetley J., 2022. From A preliminary 3D model of the Boree Salt in the Adavale Basin, Queensland. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, https://dx.doi.org/10.26186/146935