This resource contains sediment data for the Oceanic Shoals Commonwealth Marine Reserve (CMR) in the Timor Sea collected by Geoscience Australia during September and October 2012 on RV Solander (survey GA0339/SOL5650). Seabed sediment samples were collected from four survey areas by either a Smith McIntyre grab or box corer at 62 stations, divided between Area 1 (n=22), Area 2 (n=17), Area 3 (n=21) and Area 4 (n=2). The Oceanic Shoals Commonwealth Marine Reserve survey was undertaken as an activity within the Australian Government's National Environmental Research Program Marine Biodiversity Hub and was the key component of Research Theme 4 - Regional Biodiversity Discovery to Support Marine Bioregional Plans. Hub partners involved in the survey included the Australian Institute of Marine Science, Geoscience Australia, the University of Western Australia, Museum Victoria and the Museum and Art Gallery of the Northern Territory. Data acquired during the survey included: multibeam sonar bathymetry and acoustic backscatter; sub-bottom acoustic profiles; physical samples of seabed sediments, infauna and epibenthic biota; towed underwater video and still camera observations of seabed habitats; baited video observations of demersal and pelagic fish, and; oceanographic measurements of the water column from CTD (conductivity, temperature, depth) casts and from deployment of sea surface drifters. Further information on the survey is available in the post-survey report published as Geoscience Australia Record 2013/38 (Nichol et al. 2013).

Abstract for a Poster for the CO2CRC Symposium 2013: Atmospheric tomography is a CO2 quantification and localisation technique that uses an array of sampling points and a Bayesian inversion method to solve for the location and magnitude of a CO2 leak. Knowledge of a normalized three-dimensional dispersion plume is required in order to accurately model a leak using many meteorological parameters. A previous small scale (~20 m) study using a high precision Fourier Transform Infrared found that the emission rate was determined to within 3% of the actual release rate and the localisation within 1 m of the correct position. The technique was applied during the CO2CRC Otway Stage 2B residual saturation and dissolution test in August-October 2011. A network of eight independent CO2 sensors (Vaisala GMP343 CO2 probes) were positioned at distances ranging from 154 to 473 m from the well. A 3D sonic anemometer within the measurement area collected wind turbulence data. The results of the study indicate that, through careful data processing, measurements from the reasonably inexpensive (but lower accuracy and lower precision) CO2 sensor array can provide useful data for the application of atmospheric tomography. Results have found that the low precision of the sensors over time becomes a problem due to sensor drift. A reference measurement of CO2 helps to resolve this problem and improves the perturbation signal during data processing. Preliminary inversion modeling results will be shown to show the best estimation of locating a CO2 leakage source for the Otway Stage 2B residual saturation and dissolution test. CO2CRC Symposium 2013, Hobart

Monitoring is a regulatory requirement for all carbon dioxide capture and geological storage (CCS) projects to verify containment of injected carbon dioxide (CO2) within a licensed geological storage complex. Carbon markets require CO2 storage to be verified. The public wants assurances CCS projects will not cause any harm to themselves, the environment or other natural resources. In the unlikely event that CO2 leaks from a storage complex, and into groundwater, to the surface, atmosphere or ocean, then monitoring methods will be required to locate, assess and quantify the leak, and to inform the community about the risks and impacts on health, safety and the environment. This paper considers strategies to improve the efficiency of monitoring the large surface area overlying onshore storage complexes. We provide a synthesis of findings from monitoring for CO2 leakage at geological storage sites both natural and engineered, and from monitoring controlled releases of CO2 at four shallow release facilities - ZERT (USA), Ginninderra (Australia), Ressacada (Brazil) and CO2 field lab (Norway).

The National Exposure Information System (NEXIS) is a unique modelling capability designed by Geoscience Australia (GA) to provide comprehensive and nationally-consistent exposure information in response to the 2003 COAG commitment to cost-effective, evidence-based disaster mitigation. Since its inception, NEXIS has continually evolved to fill known information gaps by improving statistical methodologies and integrating the best publically-available data. In addition to Residential, Commercial and Industrial building exposure information, NEXIS has recently expanded to include exposure information about agricultural assets providing a wider understanding of how communities can be affected by a potential event. GA's collaboration with the Attorney General's Department (AGD) has involved the consolidation of location-based data to deliver consistent map and exposure information products. The complex information requirements emphasised the importance of having all relevant building, demographic, economic, agriculture and infrastructure information in NEXIS available in a clear and unified Exposure Report to aid decision-makers. The Exposure Report includes a situational map of the hazard footprint to provide geographic context and a listing of detailed exposure information consisting of estimates for number and potential cost of impacted buildings by use, agricultural commodities and cost, the number and social vulnerability of the affected population, and the number and lengths of infrastructure assets and institutions. Developed within an FME workbench, the tool accepts hazard footprints and other report specifics as input before providing an HTML link to the final output in approximately 5 minutes. The consolidation of data and streamlining of exposure information into a simple and uniform document has greatly assisted the AGD in timely evidence-based decision-making during the 2014-15 summer season.

ARR is a series of national guidelines and datasets fundamental to flood estimation. The work is being completed by Engineers Australia and funded by the Australian Government through the National Flood Risk Information Project at Geoscience Australia. This flyer is for promoting the revision of ARR at the Hydrology & Water Resources Symposium (HWRS 2015) in Hobart in December 2015.

Geoscience Australia and the CO2CRC operate a greenhouse gas controlled release facility at an experimental agricultural station maintained by CSIRO Plant Industry in Canberra, Australia. The facility is designed to simulate surface emissions of CO2 and other greenhouse gases from the soil into the atmosphere. Over 10 different near surface monitoring techniques were trialled at the Ginninderra controlled release site during 2012-2013. These included soil gas, soil CO2 flux, soil analysis, eddy covariance, CO2 laser, noble gas tracers, airborne hyperspectral, in-field phenotyping (thermal, hyperspectral and 3D imaging), and microbial soil genomics. Result highlights are presented. Different climatic conditions for the early 2012 release experiment (wet) and late 2013 release experiment (dry) resulted in markedly different sub-surface plume behaviour and surface expression of CO2. The differences between the years are attributed to changes in groundwater levels and drier conditions leading to a larger vadose zone during the 2013 experiment.

As part of the Australian Government's National CO2 Infrastructure Plan (NCIP), Geoscience Australia undertook a CO2 storage assessment of the Vlaming Sub-basin. The Vlaming Sub-basin a Mesozoic depocentre within the offshore southern Perth Basin located about 30 km west of Perth, Western Australia. The main depocentres formed during the Middle Jurassic to Early Cretaceous extension. The post-rift succession comprises up to 1500 m of a complex fluvio-deltaic, shelfal and submarine fan system. Close proximity of the Vlaming Sub-basin to industrial sources of CO2 emissions in the Perth area drives the search for storage solutions. The Early Cretaceous Gage Sandstone was previously identified as a suitable reservoir for the long term geological storage of CO2 with the South Perth Shale acting as a regional seal. The Gage reservoir has porosities of 23-30% and permeabilities of 200-1800 mD. The study provides a more detailed characterisation of the post Valanginian Break-up reservoir - seal pair by conducting a sequence stratigraphic and palaeogeographic assessment of the SP Supersequence. It is based on an integrated sequence stratigraphic analysis of 19 wells and 10, 000 line kilometres of 2D reflection seismic data, and the assessment of new and revised biostratigraphic data, digital well logs and lithological interpretations of cuttings and core samples. Palaeogeographies were reconstructed by mapping higher-order prograding packages and establishing changes in sea level and sediment supply to portray the development of the delta system. The SP Supersequence incorporates two major deltaic systems operating from the north and south of the sub-basin which were deposited in a restricted marine environment. Prograding clinoforms are clearly imaged on regional 2D seismic lines. The deltaic succession incorporates submarine fan, pro-delta, delta-front to shelfal, deltaic shallow marine and fluvio-deltaic sediments. These were identified using seismic stratigraphic techniques and confirmed with well ties where available. The break of toe slope was particularly important in delineating the transition between silty slope sediments and fine-grained pro-delta shales which provide the seal for the Gage submarine fan complex. As the primary reservoir target, the Gage lowstand fan was investigated further by conducting seismic faces mapping to characterise seismic reflection continuity and amplitude variations. The suitability of this method was confirmed by obtaining comparable results based on the analysis of relative acoustic impedance of the seismic data. The Gage reservoir forms part of a sand-rich submarine fan system and was sub-divided into three units. It ranges from canyon confined inner fan deposits to middle fan deposits on a basin plain and slump deposits adjacent to the palaeotopographic highs. Directions of sediment supply are complex. Initially, the major sediment contributions are from a northern and southern canyon adjacent to the Badaminna Fault Zone. These coalesce in the inner middle fan and move westward onto the plain producing the outer middle fan. As time progresses sediment supply from the east becomes more significant. Although much of the submarine fan complex is not penetrated by wells, the inner fan is interpreted to contain stacked channelized high energy turbidity currents and debris flows that would provide the most suitable reservoir target due to good vertical and lateral sand connectivity. The middle outer fan deposits are predicted to contain finer-grained material hence would have poorer lateral and vertical communication.

The Clarence-Moreton and the Surat basins in Queensland and northern New South Wales contain the coal-bearing sedimentary sequences of the Jurassic Walloon Coal Measures, composed of up to approximately 600 m of mudstone, siltstone, sandstone and coal. In recent years, the intensification of exploration for coal seam gas (CSG) resources within both basins has led to concerns that the depressurisation associated with future resource development may cause adverse impacts on water resources in adjacent aquifers. In order to identify the most suitable tracers to study groundwater recharge and flow patterns within the Walloon Coal Measures and their degree of connectivity with over- or underlying formations, samples were collected from the Walloon Coal Measures and adjacent aquifers in the northern Clarence-Moreton Basin and eastern Surat Basin, and analysed for a wide range of hydrochemical and isotopic parameters. Parameters that were analysed include major ion chemistry, -13C-DIC, -18O, 87Sr/86Sr, Rare Earth Elements (REE), 14C, -2H and -13C of CH4 as well as concentrations of dissolved gases (including methane). Dissolved methane concentrations range from below the reporting limit (10 µg/L) to approximately 50 mg/L in groundwaters of the Walloon Coal Measures. However, the high degree of spatial variability of methane concentrations highlights the general complexity of recharge and groundwater flow processes, especially in the Laidley Sub-Basin of the Clarence-Moreton Basin, where numerous volcanic cones penetrate the Walloon Coal Measures and may form pathways for preferential recharge to the Walloon Coal Measures. Interestingly, dissolved methane was also measured in other sedimentary bedrock units and in alluvial aquifers in areas where no previous CSG exploration or development has occurred, highlighting the natural presence of methane in different aquifers. Radiocarbon ages of Walloon Coal Measure groundwaters are also highly variable, ranging from approximately 2000 yrs BP to >40000 yrs BP. While groundwaters sampled in close proximity to the east and west of the Great Dividing Range are mostly young, suggesting that recharge to the Walloon Coal Measures through the basalts of the Great Dividing Range occurs here, there are otherwise no clearly discernable spatial patterns and no strong correlations with depth or distance along inferred flow paths in the Clarence-Moreton Basin. In contrast to this strong spatial variability of methane concentrations and groundwater ages, REE and 87Sr/86Sr isotope ratios of Walloon Coal Measures groundwaters appear to be very uniform and clearly distinct from groundwaters contained in other bedrock units. This difference is attributed to the different source material of the Walloon Coal Measures (mostly basalts in comparison to other bedrock units which are mostly composed of mineralogical more variable Paleozoic basement rocks of the New England Orogen). This study suggests that REE and 87Sr/86Sr ratios may be a suitable tracer to study hydraulic connectivity of the Walloon Coal Measures with over- or underlying aquifers. In addition, this study also highlights the need to conduct detailed water chemistry and isotope baseline studies prior to the development of coal seam gas resources in order to differentiate between natural background values of methane and potential impacts of coal seam gas development.

Superseded by 78944

The DMCii Mosaic presents a sample of imagery acquired by Geoscience Australia under CC-BY Creative Commons Attribution 3.0 Australia licence. This imagery was captured by UK2-DMC satellite between December 2011 to April 2012 and has spatial resolution of 22 metres. Spectral bands are: Band 1 NIR; Band 2 Red; Band 3 Green. The DMCii Mosaic is displayed as a Pseudo Natural Colour Image.