Authors / CoAuthors
Abstract
Geoscience Australia and Monash University have produced a series of renewable energy capacity factor maps of Australia. Solar photovoltaic, concentrated solar power, wind (150 m hub height) and hybrid wind and solar capacity factor maps are included in this web service. Solar Photovoltaic capacity factor map The minimum capacity factor is <10% and the maximum is 25%. The map is derived from Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Concentrated Solar Power capacity factor map The minimum capacity factor is 52% and the maximum is 62%. The map is derived from Bureau of Meteorology (2020) data. Minimum exposure cut-off values used are from International Renewable Energy Agency (2012) and Wang (2019). The scientific colour map is sourced from Crameri (2018). Wind (150 m hub height) capacity factor map The minimum capacity factor is <15% and the maximum is 42%. The map is derived from Global Modeling and Assimilation Office (2015) and DNV GL (2016) data. The scientific colour map is sourced from Crameri (2018). Hybrid Wind and Solar capacity factor maps Nine hybrid wind and solar maps are available, divided into 10% intervals of wind to solar ratio (eg. (wind 40% : solar 60%), (wind 50% : solar 50%), (wind 60% : solar 40%) etc.). The maps show the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum and maximum capacity factors vary relative to a map’s specified wind to solar ratio. A wind to solar ratio of 50:50 produces the highest available capacity factor of 64%. The maps are derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Disclaimer The capacity factor maps are derived from modelling output and not all locations are validated. Geoscience Australia does not guarantee the accuracy of the maps, data, and visualizations presented, and accepts no responsibility for any consequence of their use. Capacity factor values shown in the maps should not be relied upon in an absolute sense when making a commercial decision. Rather they should be strictly interpreted as indicative. Users are urged to exercise caution when using the information and data contained. If you have found an error in this dataset, please let us know by contacting clientservices@ga.gov.au.
Product Type
service
eCat Id
145175
Contact for the resource
Keywords
- Australian and New Zealand Standard Research Classification: Fields of Research
-
- Earth Sciences
-
- WMS
-
- web service
-
- Australia
-
- Renewable energy
-
- Capacity factor
-
- Published_External
Publication Date
Creation Date
Security Constraints
Classification - unclassified
Legal Constraints
Status
Purpose
Maintenance Information
Topic Category
Series Information
Lineage
This data in this web service has been produced through a collaboration between Geoscience Australian and Monash University (“Economic Fairways Project” Ref: 004749). Renewable energy capacity factor research and modelling was undertaken by Monash University. Additional research and publication was undertaken by Geoscience Australia.
Parent Information
Extents
Reference System
GDA94 (EPSG:4283) WGS 84 (EPSG:4326)
Spatial Resolution
Service Information
Type - OGC:WMS
Version - 1.3.0 1.1.1
Coupled Resource -
Connect Point - http://services.ga.gov.au/gis/services/RenewableEnergyCapacityFactorMaps/MapServer/WMSServer?request=GetCapabilities&service=WMS
Associations
Source Information