National Gravity Compilation 2019 includes airborne (CSCBA)  


Authors / CoAuthors

Geophysical Acquisition & Processing Section

Abstract

Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 includes airborne (CSCBA) is a complete spherical cap Bouguer anomaly grid for the 2019 Australian National Gravity Grids B series. This gravity survey was acquired under the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). The data are given in units of um/s^2, also known as 'gravity units', or gu.

Product Type

dataset

eCat Id

144783

Contact for the resource

  Point of contact

Commonwealth of Australia (Geoscience Australia)  
Cnr Jerrabomberra Ave and Hindmarsh Dr GPO Box 378
Canberra
ACT
2601
Australia

Keywords

theme.ANZRC Fields of Research.rdf
  • EARTH SCIENCES
( Data centre )
  • NCI
( Discipline )
  • Earth sciences
( Discipline )
  • geophysics
( Feature type )
  • grid
( Place )
  • Australia
( Place )
  • None
( Project )
  • survey 202008
( Theme )
  • GADDS2.0
( Theme )
  • gravity
( Theme )
  • spherical cap
( Theme )
  • Bouguer
( Theme )
  • complete
( Theme )
  • ground digital data
( Theme )
  • geophysical survey
( Theme )
  • grav
( Theme )
  • grid
( Theme )
  • raster
  • Published_External

Publication Date

2020-10-31T00:00:00

Creation Date

2020-10-31T00:00:00

Security Constraints

Australian Government Security ClassificationSystem    

Classification - unclassified

Legal Constraints

Creative Commons Attribution 4.0 International Licence    

Access - license

Use - license

Status

completed

Purpose

Maintenance Information

notPlanned

Topic Category

geoscientificInformation

Series Information

Lineage

This National Gravity Compilation 2019 includes airborne (CSCBA) is a complete spherical cap Bouguer anomaly grid for the 2019 Australian National Gravity Grids B series. This gravity survey was acquired under the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). The data are given in units of um/s^2, also known as 'gravity units', or gu. This gravity anomaly grid is derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented with offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Airborne gravity and gravity gradiometry data were also included to provide better resolution to areas where ground gravity data was not of a suitable quality. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with Airborne Gravity surveys totaling 345,000 line km and 106,000 line km of Airborne Gravity Gradiometry were used to generate this grid. The grid shows complete Bouguer anomalies over Australia and its continental margins. The ground and airborne gravity data used in this grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. Airborne surveys have a line spacing ranging from 0.5 km to 2.5 km. Three processes are required to correct the gravity observations for the effects of the surrounding topography: (1) a Bouguer correction (Bullard A), which approximates the topography as an infinite horizontal slab; (2) a correction to that horizontal slab for the curvature of the Earth (Bullard B); and (3) a terrain correction (Bullard C), which accounts for the undulations of the surrounding topography. The complete spherical cap Bouguer gravity anomalies were calculated by applying terrain correction (Bullard C) to the spherical cap Bouguer anomaly point data of 2019 Australian National Gravity Grids. These corrections were calculated using software that is based on a combination of the methods described by Nagy (1966) and Kane (1962). The adjustments were calculated to a radius of 166.7 km using a terrain density of 2670 kg/m3 and a sea water density of 1030 kg/m3. The terrain for onshore Australia was based on 3 second Shuttle Radar Topography Mission (SRTM) data (Gallant et al., 2011), whilst the bathymetry and the terrain data for other countries was based on AusBath09 (Whiteway, 2009) and ETOPO data. More information about the 2019 national gravity grids and the processing steps can be found in Lane et al. (2020a,b). The processed data are checked by GA geophysicists using standard methods for assessing quality to ensure that the final data are fit-for-purpose. Details of the specifications of individual surveys held in the Australian National Gravity Database (ANGD) can be found in the Second Edition of the Index of Gravity Surveys (Wynne and Bacchin, 2009). References: Gallant, J.C., Wilson, N., Dowling, T.I., Read, A.M., and Inskeep, C., 2011. SRTM-derived 3 Second Digital Elevation Models Version 1.0. Geoscience Australia, Canberra. https://pid.geoscience.gov.au/dataset/ga/72760; Kane, M. F., 1962, A comprehensive system of terrain corrections using a digital computer, 27, 455- 462; Lane, R. J. L., Wynne, P. E., Poudjom Djomani, Y. H., Stratford, W. R., Barretto, J. A., and Caratori Tontini, F., 2020a, 2019 Australian National Gravity Grids: Geoscience Australia, eCat Reference Number 133023, https://pid.geoscience.gov.au/dataset/ga/133023; Lane, R. J. L., Wynne, P. E., Poudjom Djomani, Y. H., Stratford, W. R., Barretto, J. A. and Caratori Tontini, F., 2020b, 2019 Australian national gravity grids explanatory notes: Record 2020/22, Geoscience Australia, Canberra, http://dx.doi.org/10.11636/Record.2020.022; Nagy, D., 1966, The gravitational attraction of a right rectangular prism: Geophysics, 31, 362-371; Whiteway, T. G., 2009. Australian Bathymetry and Topograhy Grid, June 2009. Geoscience Australia, Canberra. http://dx.doi.org/10.4225/25/53D99B6581B9A 20170906; Wynne, P. and Bacchin, M., 2009. Index of Gravity Surveys (Second Edition). Geoscience Australia, Record 2009/07.

Parent Information

Geophysical Data Collection - gravity

UUID - c6b58f54-102c-19e9-e044-00144fdd4fa6,

eCat ID - 74512

Extents

[-48.0021, -7.9979, 107.9979, 164.0021]

Reference System

GDA94 (EPSG:4283)

Spatial Resolution

Service Information

Associations

Downloads and Links

File available for download in various formats from the GADDS2 portal  

/g/data/iv65/Geoscience_Australia_Geophysics_Reference_Data_Collection/national_geophysical_compilations/Gravmap2019/Gravmap2019-grid-grv_cscba-IncludesAirborne.nc file at NCI  

/g/data/iv65/Geoscience_Australia_Geophysics_Reference_Data_Collection/national_geophysical_compilations/Gravmap2019/Gravmap2019-grid-grv_cscba-IncludesAirborne.nc file download  

Source Information

This National Gravity Compilation 2019 includes airborne (CSCBA) includes ground gravity data for the 2019 Australian National Gravity Grids acquired for the geological survey of None