Knowledge of the nature of buildings within business precincts is fundamental to a broad range of decision making processes, including planning, emergency management and the mitigation of the impact of natural hazards. To support these activities, Geoscience Australia has developed a building information system called the National Exposure Information System (NEXIS) which provides information on buildings across Australia. Most of the building level information in NEXIS is statistically derived, but efforts are being made to include more detailed information on the nature of individual buildings, particularly in business districts. This is being achieved in Sydney through field survey work.

Knowledge of the nature of buildings within CBD areas is fundamental to a broad range of decision making processes, including planning, emergency management and the mitigation of the impact of natural hazards. To support these activities, Geoscience Australia has developed a building information system called the National Exposure Information System (NEXIS) which provides information on buildings across Australia. Most of the building level information in NEXIS is statistically derived, but efforts are being made to include more detailed information on the nature of individual buildings, particularly in CBD areas. This is being achieved in Hobart through field survey work.

<div>South East Queensland (SEQ) is exposed to a range of severe storms that generate damaging winds, including east coast lows, thunderstorms and tropical cyclones. The risk posed by these storms is not well understood and, in a region that hosts a large proportion of Queensland’s population and economic activity, it is important to understand these risks and the potential benefits of mitigation actions, particularly in the context of climate change, urban planning and the socio-economic status of the population. &nbsp;</div><div>The primary objectives of the Severe Wind Hazard Assessment for South East Queensland (SWHA-SEQ) project (October 2020 – December 2022) were to improve the understanding of current wind risk in SEQ and to develop actionable information to inform future strategies to reduce this risk. Collaboration across fifteen partners in local government, insurance, emergency management, State government and academia has delivered valuable and actionable insights into the risk and resilience of SEQ at a local scale. </div><div> We discuss the relative contributions of different wind storms to the hazard profile, local influences on hazard and risk, and the intersection with community resilience indicators that assist in formulating targeted mitigation strategies. SEQ has a range of landscapes that influence the local hazard, including heavily urbanized lands, semi-rural communities in complex terrain and beachfront or canal estates. These landscapes, and the attributes of the buildings in them, contribute to the risk profile in varied and complex ways. We also explore the intersection of high-risk areas with socio-economic status to identify priority areas for potential retrofit programs. Presented at the 30th Conference of the Australian Meteorological and Oceanographic Society (AMOS) 2024

Knowledge of the nature of buildings within CBD areas is fundamental to a broad range of decision making processes, including planning, emergency management and the mitigation of the impact of natural hazards. To support these activities, Geoscience Australia has developed a building information system called the National Exposure Information System (NEXIS) which provides information on buildings across Australia. Most of the building level information in NEXIS is statistically derived, but efforts are being made to include more detailed information on the nature of individual buildings, particularly in CBD areas. This is being achieved in the Gold Coast through field survey work.

<div>We performed an earthquake risk assessment of the state of Tasmania through a collaboration between the Tasmania Department of State Growth and Geoscience Australia with geotechnical and geological support from Mineral Resources Tasmania (MRT). We developed local surface earthquake hazard maps for Tasmania, focusing on the twenty largest communities, based on the 2018 National Seismic Hazard Assessment and seismic site conditions map for Australia augmented by geotechnical information provided by MRT. For the building exposure database, the National Exposure Information System was augmented with an engineering survey of Hobart central business district (CBD) undertaken by GA. We used GA’s current vulnerability functions including a range of models for high-risk unreinforced masonry buildings (URM). With a focus on the Hobart CBD, retrofit measures were applied to the URM building types in order to quantify the effectiveness of mitigation. This study provided a synoptic state-wide view that enabled the identification of communities of high risk and low resilience by combining the damage related risk with the Australian Disaster Resilience Index. In addition, three earthquake scenario events centred on Hobart were modelled along with the impact reduction achieved through a virtual retrofit of old URM buildings in the Hobart CBD.&nbsp;</div><div><br></div>This paper was presented to the 2022 Australian Earthquake Engineering Society (AEES) Conference 24-25 November (https://aees.org.au/aees-conference-2022/)

<p>The Shire of York is partnering with the WA Department of Fire and Emergency Services (DFES), the University of Adelaide and Geoscience Australia in a collaborative project that will examine the opportunities for reducing the vulnerability of the township of York to a major earthquake. The project forms part of the Bushfire and Natural Hazards Collaborative Research Centre project “Cost-effective Mitigation Strategy Development for Building related Earthquake Risk”. The township of York has a number of valuable historical buildings that contribute greatly to the town’s economic prosperity and, at the same time, are vulnerable to earthquakes. <p>One of the benefits of retrofitting old buildings is the reduction in physical building repair required following a damaging earthquake. To evaluate this benefit it is necessary to know the vulnerability of the unmitigated building and how this changes following retrofit. This paper describes the approach taken to quantitatively estimate the vulnerability of unmitigated and retrofitted pre-WW1 URM buildings typical of the buildings found in York. Challenges in estimating vulnerability are discussed. Vulnerability curves are presented for one of six generic building types subjected to a range of retrofit scenarios and the economic benefit of each retrofit scenario is discussed.

Knowledge of the nature of buildings within CBD areas is fundamental to a broad range of decision making processes, including planning, emergency management and the mitigation of the impact of natural hazards. To support these activities, Geoscience Australia has developed a building information system called the National Exposure Information System (NEXIS) which provides information on buildings across Australia. Most of the building level information in NEXIS is statistically derived, but efforts are being made to include more detailed information on the nature of individual buildings, particularly in CBD areas. This is being achieved in Brisbane through field survey work.

Knowledge of the nature of buildings within business precincts is fundamental to a broad range of decision making processes, including planning, emergency management and the mitigation of the impact of natural hazards. To support these activities, Geoscience Australia has developed a building information system called the National Exposure Information System (NEXIS) which provides information on buildings across Australia. Most of the building level information in NEXIS is statistically derived, but efforts are being made to include more detailed information on the nature of individual buildings, particularly in business districts. This is being achieved in Adelaide through field survey work.

<div>We performed an earthquake risk assessment of seven smaller communities across the Yilgarn of Western Australia (WA): Northam, Merredin, Cunderdin, Kellerberrin, Wundowie, Meckering, and Tammin. This was done as a part of activities of a project entitled “Risk Assessment and Mitigation Study for Earthquakes in the Yilgarn” which, in addition to assessing risk posed to buildings by earthquakes, has a focus on understanding critical infrastructure system risk in the Yilgarn region. We modelled earthquake hazard based on the 2018 National Seismic Hazard Assessment and Geoscience Australia’s seismic site conditions map for Australia. Building exposure data was compiled by a desktop survey using available aerial imagery, purpose captured GoPro streetview type imagery and publicly available real estate information to record building attributes. We used Geoscience Australia’s current vulnerability functions which include a range of models collaboratively developed for high-risk unreinforced masonry buildings. The estimated average annualised loss ratios for the communities range from 0.008% to 0.027%, with the highest being for Kellerberrin, and the lowest being for Wundowie. We combined the damage related risk with the Australian Disaster Resilience Index to identify communities of high risk and lower resilience. Six earthquake scenario events were modelled along with the risk and impact reductions achieved through a virtual retrofit of old URM buildings in the communities. In this paper the outcomes of this research are presented and discussed in a national context.&nbsp;</div> Presented at the 2023 Australian Earthquake Engineering Society (AEES) National Conference

Knowledge of the nature of buildings within business precincts is fundamental to a broad range of decision making processes, including planning, emergency management and the mitigation of the impact of natural hazards. To support these activities, Geoscience Australia has developed a building information system called the National Exposure Information System (NEXIS) which provides information on buildings across Australia. Most of the building level information in NEXIS is statistically derived, but efforts are being made to include more detailed information on the nature of individual buildings, particularly in business districts. This is being achieved in North Sydney through field survey work.