tectonic history
Type of resources
Keywords
Publication year
Topics
-
A short article describing the outcomes of the Tasman Frontier Petroleum Industry Workshop held at Geoscience Australia on 8 and 9 March 2012.
-
Abstract: Compressional deformation is a common phase in the post-rift evolution of passive margins and rift systems. The central-west Western Australian margin, between Geraldton and Karratha, provides an excellent example of a strain gradient between inverting passive margin crust and adjacent continental crust. The distribution of contemporary seismicity in the region indicates a concentration of strain release within the Phanerozoic basins which diminishes eastward into the cratons. While few data exist to quantify uplift or slip rates, this gradient can be qualitatively demonstrated by tectonic landforms which indicate that the last century or so of seismicity is representative of patterns of Neogene and younger deformation. Pleistocene marine terraces on the western side of Cape Range indicate uplift rates of several tens of metres per million years, with similar deformation resulting in sub-aerial emergence of Miocene strata on Barrow Island and elsewhere. Northeast of Kalbarri near the eastern margin of the southern Carnarvon Basin, marine strandlines are displaced by a few tens of metres. A possible Pliocene age would indicate that uplift rates are an order of magnitude lower than further west. Relief production rates in the western Yilgarn Craton are lower still - numerous scarps (e.g. Mount Narryer) appear to relate individually to <10 m of displacement across Neogene strata. Quantitative analysis of time-averaged deformation preserved in the aforementioned landforms, including study of scarp length as a proxy for earthquake magnitude, has the potential to provide useful constraints on seismic hazard assessments in a region containing major population centres and nationally significant infrastructure.
-
Detrital zircon age patterns are reported for sandstones from the mid-Permian-Triassic part of the accretionary wedge forming the Torlesse Composite Terrane in Otago, New Zealand and from the early Permian Nambucca Block of the New England Orogen, eastern Australia. In Otago, the Triassic Torlesse samples have a major (64%) age group of Permian-Early Triassic components ca. 240, 255 and 280 Ma, and a minor age group (30%) with a Precambrian-early Paleozoic range (ca. 500, 600 and 1000 Ma). In Permian sandstones nearby, the younger group is diminished (30%), and the older group also contains a major (50%) and unusual, Carboniferous group (components at ca. 330-350 Ma). This trend is similar in sandstones from the Nambucca Block, an early Permian extensional basin in the southern New England Orogen, in which Permian zircons are now minor (<20%), and the age patterns are also dominated (40%) by similar Carboniferous age components, ca. 320-350 Ma.
-
Preserved within the Glenelg River Complex of SE Australia is a sequence of metamorphosed late Neoproterozoic-early Cambrian deep marine sediments intruded by mafic rocks ranging in composition from continental tholeiites to mid-ocean ridge basalts. This sequence originated during breakup of the Rodinia supercontinent and is locally host to lenses of variably sheared and serpentinised mantle-derived peridotite (Hummocks Serpentinite) representing the deepest exposed structural levels within the metamorphic complex. Direct tectonic emplacement of these rocks from mantle depths is considered unlikely and the ultramafites are interpreted here as fragments of sub-continental lithosphere originally exhumed at the seafloor during continental breakup through processes analogous to those that produced the hyper-extended continental margins of the North Atlantic. Subsequent to burial beneath marine sediments, the exhumed ultramafic rocks and their newly acquired sedimentary cover were deformed and tectonically dismembered during arc-continent collision accompanying the early Paleozoic Delamerian Orogeny, and transported to higher structural levels in the hangingwalls of west-directed thrust faults. Thrust-hosted metasedimentary rocks yield detrital zircon populations that constrain the age of mantle exhumation and attendant continental breakup to be no later than late Neoproterozoic-earliest Cambrian. A second extensional event commencing ca. 490 Ma overprints the Delamerian-age structures; it was accompanied by granite magmatism and low pressure-high temperature metamorphism but outside the zone of magmatic intrusion failed to erase the original, albeit modified, rift geometry. This geometry originally extended southward into formerly contiguous parts of the Ross Orogen in Antarctica where mafic-ultramafic rocks are similarly hosted by a deformed continental margin sequence.
-
The Tasman Frontier region includes c. 3,000,000 sq km of seabed that is thought to be underlain by crust with continental affinities: the Lord Howe Rise, Bellona Trough, Challenger Plateau, Dampier Ridge, Middleton Basin, Fairway Basin, New Caledonia Trough, Norfolk Ridge System, Reinga Basin, and deep-water parts of Taranaki and Northland basins. We have compiled and interpreted c. 100,000 line km of archival seismic reflection data. Using seismic stratigraphy tied to Deep Sea Drilling Project (DSDP) wells, we identify a tectonic and stratigraphic event that we refer to as the 'Tectonic Event of the Cenozoic Tasman Area' (TECTA). This Middle Eocene to Late Oligocene event involved regional uplift followed by 1-2 km of tectonic subsidence of topographic highs, and >2 km of tectonic subsidence in the New Caledonia Trough. Strata below the TECTA reflector (or seismic unit in some places) are locally folded or reverse faulted. We present seismic-stratigraphic evidence that numerous islands were transiently created by uplift on the Lord Howe Rise during the TECTA event. We suggest that the underlying cause of the TECTA event was initiation of the subduction system that has since evolved into the Tonga-Kermadec system. Note: Abstract for initial submission; acceptance to be confirmed.
-
Introduction: As part of the Offshore Energy Security Program (2007-2011), Geoscience Australia (GA) undertook an integrated regional study of the deepwater Otway and Sorell basins to improve the understanding of the geology and petroleum prospectivity of the region. The under-explored deepwater Otway and Sorell basins lie offshore of southwestern Victoria and western Tasmania in water depths of 100-4,500 m. The basins developed during rifting and continental separation between Australia and Antarctica from the Cretaceous to Cenozoic and contain up to 10 km of sediment. Significant changes in basin architecture and depositional history from west to east reflect the transition from a divergent rifted continental margin to a transform continental margin. The basins are adjacent to hydrocarbon-producing areas of the Otway Basin, but despite good 2D seismic data coverage, they remain relatively untested and their prospectivity poorly understood. The deepwater (>500 m) section of the Otway Basin has been tested by two wells, of which Somerset 1 recorded minor gas shows. Three wells have been drilled in the Sorell Basin, where minor oil shows were recorded near the base of Cape Sorell 1. Structural framework: Using an integrated approach, new aeromagnetic data, open-file potential field, seismic and exploration well data were used to develop new interpretations of basement structure and basin architecture. This analysis has shown that reactivated north-south Paleozoic structures, particularly the Avoca-Sorell Fault System, controlled the transition from extension through transtension to a dominantly strike-slip tectonic regime along this part of the southern margin. Depocentres to the west of this structure are large and deep in contrast to the narrow elongate depocentres to its east. ...
-
Neotectonism on the eastern Australian passive margin: evidence from the Lapstone Structural Complex
Faults of the Lapstone Structural Complex (LSC) underlie 100 km, and perhaps as much as 160 km, of the eastern range front of the Blue Mountains, west of Sydney, Australia. More than a dozen major faults and monoclinal flexures have been mapped along its extent. Debate continues as to the age of formation of the ~400 m or more of relief relating to the LSC, with estimates ranging from Palaeozoic to Pliocene. The results of an investigation of Mountain Lagoon, a small basin bound on its eastern side by the Kurrajong Fault in the central part of the LSC, favour a predominantly pre-Neogene origin. Drilling on the eastern margin of the lagoon identified 15 m of fluvial, colluvial and lacustrine sediments, overlying shale bedrock. The sediments are trapped behind a sandstone barrier corresponding to the Kurrajong Fault. Dating of pollen grains preserved in sediments at the base of this sediment column suggest that the fault-angle depression began trapping sediment in the Early to Middle Miocene. Strongly heated Permo-Triassic gymnosperm pollen in the same strata provides circumstantial evidence that sediment accumulation post-dates the ca. 18.8 Ma emplacement of the nearby Green Scrub basalt. Our data indicate that only 15 m of the 130 m of throw across the Kurrajong Fault has occurred during the Neogene suggesting a predominantly erosional exhumation origin for current relief at the eastern edge of the Blue Mountains plateau. Sedimentation since the Late Pleistocene appears to have been controlled largely by climatic processes, with tectonism exerting little or no influence.
-
Numerous disparate and, in many cases, mutually inconsistent models for the Proterozoic amalgamation and evolution of the Australian continent have been published over the past ~15 years. Most of the models involve large-scale relative movements between pre-existing cratonic blocks, as well as accretion of relatively juvenile crust to cratonic margins, via modern style subduction-tectonics. As such, improved geological understanding of the margins of the major constituent cratonic blocks is critical to testing between contrasting evolutionary models. Both the northern and eastern margins of the Gawler Craton, South Australia, are characterised by shear zones with strike lengths of several hundred kilometres; the Karari Shear Zone in the north, and the Kalinjala Shear Zone in the east. Each of these structures preserves evidence for very significant strike-slip motion, but also juxtaposes rocks from different crustal levels indicating significant dip-slip motion. Recently-acquired deep seismic transects across each of these cratonic margins, together with new U-Pb and 40Ar/39Ar geochronology are interpreted to indicate that the Karari Shear Zone was likely active in at least three episodes through the Paleo- and Mesoproterozoic, and currently preserves an overall north-dipping thrust geometry that dates from the early Mesoproterozoic (~1580 - 1450 Ma). In contrast, on the eastern margin of the craton, the northern part of the Kalinjala Shear Zone preserves an east-dipping bulk extensional geometry that dates from the Paleoproterozoic (~1800 - 1740 Ma). The temporal evolution of the margins of the Gawler Craton provides constraints on models invoking tectonic interaction with other parts of Proterozoic Australia.
-
Australian Governments over the past decade have acquired thousands of kilometres of high-quality deep-seismic reflection data. The deep-seismic reflection method is unique among imaging techniques in giving textural information as well as a cross sectional view of the overall crust, including the character of the middle crust, lower crust, Moho, and any upper mantle features. Seismic reflection data can be readily integrated with other geophysical and geological data to provide an unsurpassed understanding of a region's geological history as well as the mineral and energy resource potential. Continental Australia is made up of four main elements (blocks), separated by orogens. Most boundaries between the elements are deeply rooted in the lithosphere, and formed during amalgamation of Australia. Major boundaries within the elements attest to their individual amalgamation, mostly prior to the final construction of the continent. Many of Australia's mineral and energy resources are linked to these deep boundaries, with modern seismic reflection providing excellent images of the boundaries. All of the seismic surveys have provided new geological insights. These insights have significantly advanced the understanding of Australian tectonics. Examples include: preservation of extensional architecture in an otherwise highly shortened terrane (Arunta, Yilgarn, Mt Isa and Tanami), unknown deep structures associated with giant mineral deposits (Olympic Dam, Yilgarn, Gawler-Curnamona), as well as the discovery of unknown basins, sutures and possible subduction zones (Arunta, North Queensland, Gawler-Curnamona). These new insights provide not only an improved tectonic understanding, but also new concepts and target areas for mineral and energy resources.
-
We present a seismic reflection section acquired across the western margin of the Lake George Basin near Geary's Gap which images the stratigraphy of the basin sediments and the interaction between faults and these sediments. When coupled with high resolution topographic data, key aspects of the evolution of the Lake George Basin may be deduced. The Lake George Basin formed as the result of west-dipping reverse faulting and associated fault propagation folding at the eastern margin of the Lake George Range in the interval between ca. 3.93 Ma and the present. Assuming that elevated gravels in Geary's Gap and to the west along Brooks Creek are correlative with similar lithology at the base of the basin (as suggested by previous workers), vertical displacement in the order of 250 m has occurred in this time interval. This is one of the larger rates of displacement recorded for an Australian intraplate fault, averaged over a timescale of several million years. Three prominent angular unconformities, separating packages of approximately parallel strata, indicate that deformation was episodic, with up to 1 million years separating active periods on the fault. The ~75 km active length of the Lake George Fault is consistent with a MW7.4 characteristic earthquake. An event of this magnitude has the potential to cause significant damage to the Australian Capital Territory, given that the surface trace of the fault approaches to within 25 km of Parliament House. Assuming periodic recurrence, a characteristic event might be expected every ~3040 kyr. However, the evidence for temporal clustering suggests that such events might be much more tightly spaced in time (perhaps by an order of magnitude) in an active period on the fault. This neotectonic activity is allied to the Late Pliocene to Pleistocene `Kosciuszko Uplift, which may be responsible for adding several hundred metres of relief to the Eastern Highlands of Australia. Few crustal fault systems which might have accommodated such large-scale uplift have yet been characterised. Consequently, the seismic hazard of the Eastern Highlands, which is based largely upon the short historic record of seismicity, is likely to be underestimated. Nearby candidate faults for similar activity include the Queanbeyan, Murrumbidgee, Shoalhaven, Crookwell, Mulwaree, Binda, Tawonga, Khancoban-Yellow Bog and Jindabyne faults.