<div>The footprint of a mineral system is potentially detectable at a range of scales and lithospheric depths, reflecting the size and distribution of its components. Magnetotellurics is one of a few techniques that can provide multiscale datasets to understand mineral systems. The Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP) is a collaborative national survey that acquires long-period magnetotelluric data on a half-degree grid spacing (about 55 km) across Australia. This project aims to map the electrical conductivity/resistivity structure in the crust and mantle beneath the Australian continent. We have used AusLAMP as a first-order reconnaissance survey to resolve large-scale lithospheric architecture for mapping areas of mineral potential in Australia. AusLAMP results show a remarkable connection between conductive anomalies and giant mineral deposits in known highly endowed mineral provinces. Similar conductive features are mapped in greenfield areas where mineralisation has not been previously recognised. In these areas we can then undertake higher-resolution infill magnetotelluric surveys to refine the geometry of major structures, and to investigate if deep conductive structures are connected to the near surface by crustal-scale fluid-flow pathways.</div><div> We summarise the results from a 3D resistivity model derived from AusLAMP data in Northern Australia. This model reveals a broad conductivity anomaly in the lower crust and upper mantle that extends beneath an undercover exploration frontier between the producing Tennant Creek region and the prospective Murphy Province. This anomaly potentially represents a fertile source region for mineral systems. A subsequent higher-resolution infill magnetotelluric survey revealed two prominent conductors within the crust whose combined responses produced the lithospheric-scale conductivity anomaly mapped in the AusLAMP model. Integration of the conductivity structure with deep seismic reflection data revealed a favourable crustal architecture linking the lower, fertile source regions with potential depositional sites in the upper crust. Integration with other geophysical and geochronological datasets suggests high prospectivity for major mineral deposits in the vicinity of major faults.</div><div> This study demonstrates that the integration of geophysical data from multiscale surveys is an effective approach to scale reduction during mineral exploration in covered terranes.</div> This Abstract was submitted to and presented at the 6th International Archean Symposium Target 2023, 28 July (https://6ias.org/target2023/)

Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government. As part of Exploring for the Future (EFTF) program with contributions from the Geological Survey of Queensland, long-period magnetotelluric (MT) data for the Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP) were collected using Geoscience Australia's LEMI-424 instruments on a half-degree grid across Queensland from April 2021 to November 2022. This survey aims to map the electrical resistivity structures in the region. These results provide additional information about the lithospheric architecture and geodynamic processes, as well as valuable precompetitive data for resource exploration in this region. This data release package includes processed MT data, a preferred 3D resistivity model projected to GDA94 MGA Zone 54 and associated information for this project. The processed MT data were stored in EDI format, which is the industry standard format defined by the Society of Exploration Geophysicists. The preferred 3D resistivity model was derived from previous EFTF AusLAMP data acquired from 2016-2019 and recently acquired AusLAMP data in Queensland. The model is in SGrid format and geo-referenced TIFF format.

<p>Airborne electromagnetic (AEM) data can be acquired cost-effectively, safely and efficiently over large swathes of land. Inversion of these data for subsurface electrical conductivity provides a regional geological framework for water resources management and minerals exploration down to depths of ~200 m, depending on the geology. However, for legacy reasons, it is not uncommon for multiple deterministic inversion models to exist, with differing details in the subsurface conductivity structure. This multiplicity presents a non-trivial problem for interpreters who wish to make geological sense of these models. In this article, we outline a Bayesian approach, in which various spatial locations were inverted in a probabilistic manner. The resulting probability of conductivity with depth was examined in conjunction with multiple existing deterministic inversion results. The deterministic inversion result that most closely followed the high-credibility regions of the Bayesian posterior probability was then selected for interpretation. Examining credibility with depth also allowed interpreters to examine the ability of the AEM data to resolve the subsurface conductivity structure and base geological interpretation on this knowledge of uncertainty. <p> <b>Citation:</b> Ray, A., Symington, N., Ley-Cooper, Y. and Brodie, R.C., 2020. A quantitative Bayesian approach for selecting a deterministic inversion model. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

<div>Long-period magnetotelluric (MT) data from the Australian Lithospheric Architecture Magnetotelluric Project (AusLAMP), collected as part of Geoscience Australia’s Exploring for the Future program with contributions from the Northern Territory Geological Survey and the Geological Survey of Queensland, provide important first-order information for resolving large-scale lithospheric architecture and identifying the broad footprint of mineral systems in northern Australia. Large-scale crust/mantle conductivity anomalies map pathways of palaeo-fluid migration which is an important element of several mineral systems. For example, the Carpentaria conductivity anomaly east of Mount Isa and the Croydon, Georgetown to Greenvale conductivity anomaly are highly conductive lithospheric-scale structures, and show spatial correlations with major suture zones and known mineral deposits. These results provide evidence that some mineralisation occurs at the gradient of or over highly conductive structures at lower crustal and lithospheric mantle depths, which may represent fertile source regions for mineral systems. These observations provide a powerful means of highlighting prospective greenfield areas for mineral exploration in under-explored and covered regions.</div><div><br></div><div>Higher resolution scale-reduction MT surveys refine the geometry of some conductive anomalies from AusLAMP data, and investigate whether these deep conductivity anomalies link to the near surface. These links may act as conduits for crustal/mantle scale fluid migration to the upper crust, where they could form mineral deposits. For example, data reveals a favourable crustal architecture linking the deep conductivity anomaly or fertile source regions to the upper crust in the Cloncurry region. In addition, high-frequency MT data help to characterise cover and assist with selecting targets for drilling and improve the understanding of basement geology.</div><div><br></div><div>These results demonstrate that integration of multi-scale MT surveys is an effective approach for mapping lithospheric-scale features and selecting prospective areas for mineral exploration in covered terranes with limited geological knowledge.</div><div><br></div><div>Some models in this presentation were produced on the National Computational Infrastructure, which is supported by the Australian government. Abstract presented to the Australian Institute of Geoscientists – ALS Friday Seminar Series: Geophysical and Geochemical Signatures of Queensland Mineral Deposits October 2023 (https://www.aig.org.au/events/aig-als-friday-seminar-series-geophysical-and-geochemical-signatures-of-qld-mineral-deposits/)

<div>In June to September 2022 an airborne electromagnetic (AEM) survey was flown over parts of the Curnamona Province, Delamerian Orogen and Darling Region in South Australia, New South Wales and Victoria.&nbsp;Geoscience Australia commissioned the survey in collaboration with the Department of Regional New South Wales as part of the Australian Government’s Exploring for the Future program. A total of 14,509 line kilometres of new data were acquired, of which 3,407 line kilometres were funded by the Department of Regional New South Wales. GA managed all aspects of the acquisition, quality control and processing of the AEM data.</div><div><br></div><div>The survey was flown by Skytem Australia Pty Ltd using its SkyTEM312Fast AEM system. The survey was conducted on east-west lines spaced at 2,500 m and 5,000 m apart.&nbsp;Skytem Australia Pty Ltd also processed the data. This data package includes the acquisition and processing report, the final processed AEM data and the results of the 1D laterally constrained inversion of the data to conductivity-depth estimates that was carried out by the contractor. The data package additionally contains the results and derived products from a 1D inversion carried out by Geoscience Australia with its own inversion software.</div><div><br></div><div>Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div><div><br></div>

<div>This package contains Airborne Electromagnetic (AEM) data from the regional survey flown over the Upper Darling Floodplain in New South Wales (NSW), Australia between March-July 2022. Approximately 25,000 line km of transient EM and magnetic data were acquired. Geoscience Australia (GA) commissioned the survey in collaboration with the New South Wales Department of Planning and Environment (NSW DPE) as part of the Australian Government’s Exploring for the Future (EFTF) program (https://www.ga.gov.au/eftf). The NSW DPE were funding contributors to the AEM data collection. GA managed all aspects of the acquisition, quality control and processing of the AEM data.</div>

This data release includes SPECTREM® AEM data from eleven airborne electromagnetic (AEM) surveys in Western Australia, originally flown for Anglo American Exploration (Australia) Pty Ltd in 2009, 2011 and 2012 and a survey flown in South Australia for Metex Nickel Pty Ltd in 2012. Data for each survey are open-file and were downloaded from the Government of Western Australia, Department of Mines, Industry Regulation and Safety and Government of South Australia, Department of Energy and Mining. AEM data were re-processed and re-inverted to produce conductivity models and a suit of derived datasets using Geoscience Australia Layered-Earth-Inversion as a single standard processing and inversion method to improve continuity and data quality. This data release includes visualisation products including conductivity sections, grids, s-grids, georeferenced sections and earth-sci sections.

<div>Two coincident, crustal-scale models, one of magnetic susceptibility and one of density, have been produced for a volume covering the Australian continent and extending down to 55.5 km depth. These models were produced using the UBC‑GIF MAG3D and GRAV3D inversion programs, respectively.</div><div><br></div><div>The inversions were constrained with geological reference models with layers for sediments, undifferentiated crust and the mantle. The reference model for the magnetic inversion incorporated a Curie depth surface below which magnetic susceptibility was set to zero.</div><div><br></div><div>Due to the size of the inversion problem to be solved, the volume was divided into 235 overlapping inversions, which were inverted separately and then recombined. The method of recombining the inversions relies on a cosine function to determine the weight of each property and then takes a weighted average. This method successfully attenuated the edge effects that would otherwise occur between models and allows them to be viewed as one seamless model that covers the whole of Australia.</div><div><br></div><div>Regions of coincident high-density (&gt;2.83 g/cm³) and high-magnetic susceptibility (&gt;0.0125 SI) within the top 8‑9&nbsp;km of the undifferentiated crust are suggested to be related to ultramafic rocks and the magnetite-forming hydrothermal alteration stages of potentially fertile IOCG systems. Currently the models are available in UBCGIF format (.den/.sus) only. Other formats and all supporting input data will be added in the near future. Due to their size, the models have been divided into subsets (labelled 1-17) for download. Please refer to the image below for the extent of the subsets.

This airborne electromagnetic (AEM) dataset provides regional scale probabilistic inversion products from 141,000 line km of airborne electromagnetic (AEM) data from the AusAEM program. The two main benefits of a probabilistic inversion over a deterministic one are: - Loss of signal sensitivity at depth does not “fade to blue” by returning to the resistive deterministic reference model. - Ambiguous subsurface features become clearer when examining multiple probability percentiles. Further details are provided in the accompanying technical note. Conductivity products from the following surveys are available: - Frome 2011 - AusAEM 1 NT (2017) - AusAEM 1 QLD (2017) - AusAEM 2 Tranche 1 part (2019) - AusAEM 3 Eastern Resources Corridor (all 3 phases) - AusAEM 3 Western Resources Corridor (Kimberley, Central, Musgraves and South) The 10th, 50th and 90th and mean percentiles of log10 conductivity are provided in a variety of formats: - VTK structured grids - ASCII point clouds - ASEG-GDF2 files - GOCAD S-grids All products have been provided in the coordinate reference system (CRS) the original AEM data were provided in. The VTK unstructured grids are also provided in GDA94 geodetic longitude, latitude coordinates for ease of display in the same CRS.