Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight-year, $225m investment by the Australian Government. The Darling-Curnamona-Delamerian (DCD) 2D reflection seismic survey was acquired during May to August 2022 in the Delamerian Orogen, the Murray-Darling basin, the Curnamona Province, and the upper Darling River floodplain regions in South Australia, Victoria and New South Wales. This project is a collaboration between Geoscience Australia (GA), the Geological Survey of South Australia (GSSA), the Geological Survey of Victoria (GSV) and the Geological Survey of New South Wales (GSNSW) and was funded by the Australian Government’s Exploring for the Future (EFTF) program. The overall objective of the EFTF Darling-Curnamona-Delamerian project is to improve the understanding of mineral and groundwater resources of the Curnamona Province and Delamerian Orogen and overlying basin systems through acquisition and interpretation of new pre-competitive geoscience data sets. The total length of acquisition was 1256 km distributed over five deep crustal 2D reflection seismic lines 22GA-DL1 (446 km), 22GA-DL2 (249 km), 22GA-CD1 (287 km), 22GA-CD2 (178 km), 22GA-CD3 (39.5 km) to image deep crustal structures, and a high-resolution 2D reflection seismic line 22GA-UDF (56 km) to explore groundwater resources. The DL lines provide coverage of fundamental geophysical data over the Flinders Range, the Delamerian Province and the Murray-Darling basin region in eastern South Australia and Victoria. The CD lines extend through the Curnamona Province and into the Darling Basin. The UDF line will assist with refining the hydrogeological model, understanding groundwater dynamics, and locating areas better suited to groundwater bores for better quality groundwater in the upper Darling River floodplain area. The data processing was performed by a contractor under the supervision of Geoscience Australia. The five deep crustal lines (22GA-DL1,DL2,CD1,CD2,CD3) were processed with record lengths of 20 and 8 seconds, while the shallow high-resolution line (22GA-UDF) was processed at a 4 second length. This processing yielded DMO Stack, Post-Stack Time Migration, and Pre-Stack Time Migration products. <strong>Raw shot gathers and processed gathers for this survey are available on request from clientservices@ga.gov.au - Quote eCat# 147423</strong>

The Exploring for the Future (EFTF) program is an Australian government initiative to boost investment in resource exploration and development in Australia, and is committed to supporting a strong economy, resilient society and sustainable environment for the benefit of Australians. There are a number of interrelated projects within the EFTF, including the Australia’s Resources Framework (ARF) project. The latter is a continental-scale project aimed at laying the foundations for a national view of Australia’s surface and subsurface geology, to underpin our understanding of the continent’s mineral, energy and groundwater potential. The ARF project involves new, large-scale data acquisition, advances in big data analytics and tailored resource assessments, to support the resource sector, agriculture, remote communities and the environment, and contribute to community safety. As part of ARF, Geoscience Australia has been undertaking studies of Australian basins that are prospective for, or have potential for, basin-hosted base metal mineral systems (Pb-Zn, Co-Cu), as part of the basins module. The first component of this module (2016-2020) investigated the Paleoproterozoic to Mesoproterozoic greater McArthur Basin system, Northern Territory and western Queensland (Champion et al., 2020 a, b, c; Huston et al. 2020). The 2020-2024 module is focusing on the Neoproterozoic part of the Stuart Shelf region of the Adelaide Superbasin, South Australia. The Paleo- to Mesoproterozoic sedimentary and volcanic sequences of the Mount Isa–McArthur Basin region of Northern Territory and Queensland are host to a range of world class mineral deposits (Hutton et al., 2012) and include the basin-hosted base metal deposits of the North Australian Zinc Belt, the world’s richest belt of zinc deposits (Huston et al., 2006; Large et al., 2005). These syngenetic (and epigenetic) basin-hosted mineral deposits include McArthur River (formerly HYC) and Century lead-zinc (Pb-Zn) deposits, the Walford Creek Zn-Pb-Cu-Ag deposit (Rohrlach et al., 1998; Large et al., 2005; Hutton et al. 2012) and the Redbank Cu deposit (Knutson et al. 1979). The Neoproterozoic sedimentary sequences of the Stuart Shelf, and their continuation into the Torrens Hinge Zone and Adelaide Rift Complex (Adelaide Superbasin), South Australia, are host to, or form an integral part of, a number of, often historically important, deposits, including the first copper mining region in Australia. These include, amongst others, the Kapunda, Mt Gunson, Cattle Grid, MG14, Windabout, Myall Creek, and Emmie Bluff copper deposits (Lambert et al. 1980, 1984, 1985 1987; Knutson et al. 1983; Coda Minerals 2020, 2021). These deposits are hosted within the Neoproterozoic sediments or along the basal unconformity with older Mesoproterozoic clastic sedimentary rocks (Lambert et al. 1987). This report contains reanalysed geochemical data, and associated sample metadata, for legacy samples collected by the Baas Becking laboratories in the 1970’s from deposits and surrounds in the MacArthur Basin and Stuart Shelf region. This includes samples (mafic igneous rocks, mineralised samples and sedimentary rocks) from the Redbank Cu deposit and surrounds in the McArthur Basin, partly documented in Knutson et al. (1979); samples (sediments, mafic igneous rocks including basement volcanic units (Gawler Range Volcanics), and mineralised samples) from the Mt Gunson deposit and surrounds (Mt Gunson-Lake Dutton area) documented in Knutson et al. (1983, 1992); and a small subset of five samples (sediments, variably mineralised) from the Myall Creek prospect, documented in Lambert et al. (1984). The great majority of these samples are from drill core, with the full list of samples analyses and metadata listed in Appendix A and summarised in Table 1. This data release also includes 52 samples from the Killi Killi Hills regions and surrounds, Tanami, Northern Territory (jobno 9004424), collected by the NTGS and GA, and originally analysed, in the early 1990’s and early 2000’s. These samples included a subset of P2O5-Sr-HREE-enriched Gardiner Sandstone samples from the Killi Killi Hills prospect. These samples are not directly related to the basins project but have been included as they were analysed at the same time as the Stuart Shelf and Redbank samples, and they increase the number of samples and the range of rock types analysed, and so help with statistics for QA/QC purposes. All geochemical data are provided in the appendices, listed by batch. The data can be downloaded via the Geoscience Australia EFTF portal (https://portal.ga.gov.au/persona/eftf).

Presentation to Australian Research Council (ARC) Training Centre for Data Analytics in Resources and Environment (DARE) Symposium (17 February 2023, University of Sydney) demonstrating use of uncertainty in hydrogeophysical applications as part of the Upper Darling River Floodplain EFTF project.

Geoscience Australia’s Exploring for the Future (EFTF) program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government. Further detail is available at http://www.ga.gov.au/eftf. The National Groundwater Systems (NGS) project, is part of the Australian Government’s Exploring for the Future (EFTF) program, led by Geoscience Australia (https://www.eftf.ga.gov.au/national-groundwater-systems), to improve understanding of Australia’s groundwater resources to better support responsible groundwater management and secure groundwater resources into the future. The project is developing new national data coverages to constrain groundwater systems, develop a new map of Australian groundwater systems and improve data standards and workflows of groundwater assessment to populate a consistent data discovery tool and web-based mapping portal to visualise, analyse and download hydrogeological information. While our hydrogeological conceptual understanding of Australian groundwater systems continues to grow in each State and Territory jurisdiction, in addition to legacy data and knowledge from the 1970s, new information provided by recent studies in various parts of Australia highlights the level of geological complexity and spatial variability in stratigraphic and hydrostratigraphic units across the continent. We recognise the need to standardise individual datasets, such as the location and elevation of boreholes recorded in different datasets from various sources, as well as the depth and nomenclature variations of stratigraphic picks interpreted across jurisdictions to map such geological complexity in a consistent, continent-wide stratigraphic framework that can support effective long-term management of water resources and integrated resource assessments. This stratigraphic units data compilation at a continental scale forms a single point of truth for basic borehole data including 47 data sources with 1 802 798 formation picks filtered to 1 001 851 unique preferred records from 171 367 boreholes. This data compilation provides a framework to interpret various borehole datasets consistently, and can then be used in a 3D domain as an input to improve the 3D aquifer geometry and the lateral variation and connectivity in hydrostratigraphic units across Australia. The reliability of each data source is weighted to use preferentially the most confident interpretation. Stratigraphic units are standardised to the Australian Stratigraphic Units Database (ASUD) nomenclature (https://asud.ga.gov.au/search-stratigraphic-units) and assigned the corresponding ASUD code to update the information more efficiently when needed. This dataset will need to be updated as information grows and is being revised over time. This dataset provides: 1. ABSUC_v1 Australian stratigraphic unit compilation dataset (ABSUC) 2. ABSUC_v1_TOP A subset of preferred top picks from the ABSUC_v1 dataset 3. ABSUC_v1_BASE A subset of preferred base picks from the ABSUC_v1 dataset 4. ABSUC_BOREHOLE_v1 ABSUC Borehole collar dataset 5. ASUD_2023 A subset of the Australia Stratigraphic Units Database (ASUD) This consistent stratigraphic units compilation has been used to refine the Great Artesian Basin geological and hydrogeological surfaces in this region and will support the mapping of other regional groundwater systems and other resources across the continent. It can also be used to map regional geology consistently for integrated resource assessments.

This animation shows how Airborne Electromagnetic Surveys Work, when conducted by a rotary wing (helicopter) aircraft. It is part of a series of Field Activity Technique Engagement Animations. The target audience are the communities that are impacted by our data acquisition activities. There is no sound or voice over. The 2D animation includes a simplified view of what AEM equipment looks like, what the equipment measures and how the survey works.

Exploring for the Future (EFTF) is an Australian Government initiative that gathers new data and information about potential mineral, energy and groundwater resources. Commencing in 2016 with a focus on northern Australia, an EFTF extension to 2024 was recently announced, with expanded coverage across mainland Australia and Tasmania. The EFTF energy component aims to improve our understanding of the petroleum potential of frontier onshore Australian basins and has acquired significant pre-competitive datasets, including the recently drilled Barnicarndy 1 deep stratigraphic well in Western Australia’s Canning Basin (in partnership with the Geological Survey of Western Australia), and NDI Carrara 1 deep stratigraphic well in the South Nicholson region of the Northern Territory (in partnership with the MinEX CRC). These are the first stratigraphic wells drilled in a petroleum basin by Geoscience Australia since the formation in 2001 from its predecessor agencies. Both wells were sited along two-dimensional, deep crustal seismic surveys acquired by Geoscience Australia as part of EFTF, and provide stratigraphic control for the imaged geology. The sedimentary fill intersected by the Barnicarndy 1 and NDI Carrara 1 wells were cored and logged with a broad suite of wireline tools, providing substantial new data in two frontier basins. These data provide insights into regional stratigraphy and local lithology. Geochronology, petrographic, organic and inorganic geochemistry, petrophysical rock properties, petroleum systems elements, palaeontological, and fluid inclusion studies have been undertaken upon which inferences on regional prospectivity can made in these data-poor regions. Moving into the next phase of EFTF, these wells provide a template for new pre-competitive data acquisition by Geoscience Australia, expanding our knowledge of frontier regions making them attractive for new investment and exploration.

Exploring for the Future (EFTF) is an Australian Government program led by Geoscience Australia (GA), in partnership with state and Northern Territory governments. The EFTF program (2016-2024) aims to drive industry investment in resource exploration in frontier regions of onshore Australia by providing new precompetitive data and information about their energy, mineral and groundwater resource potential. Under the EFTF program, the Basin Inventory Project undertook a study of petroleum prospectivity of the onshore Eromanga Basin in Queensland and South Australia. Yongala 1 well in Queensland was selected based on the occurrence of gas and oil shows reported in the well completion report. Sampling of cuttings and cores was done at Geoscience Australia's Petroleum Data Repository in Canberra. Geoscience Australia commissioned a fluid inclusion stratigraphy (FIS) study on the downhole samples. Here, volatile components ostensibly trapped with fluid inclusions are released and analysed revealing the level of exposure of the well section to migrating fluids. Integration of thin section (TS) preparations reveal the extent of gas and fluid trapping within fluid inclusions while microthemometry (MT) gives an estimation of fluid inclusion trapping temperature. For Yongala 1, FIS analysis was performed on 418 cuttings and 52 cores between 15.2 metres and 3104.5 metres base depth, together with 22 samples prepared for TS and 3 samples for MT. To support this study, lithostratigraphic tops were compiled by Geoscience Australia. The results of the study are found in the accompanying documents.

This is a collection of continuous seismic records gathered by temporal and semi-permanent seismic deployments where real-time data transmission was not available. Time spans vary from half an hour to more than a year depending on the purpose of the survey. Description of the employed instrumentation and array constellations can be found in the accompanied material. <b>Value: </b>Passive seismic data contains records of soil vibration due to the natural earth movements, ocean, weather, and anthropogenic activities. This data is used in ongoing research to infer national lithospheric structure from depth of a few meters to a hundred kilometres. Derived models are an important source of information for assessment of resource potential and natural hazard. <b>Scope: </b>Over time, surveys have been focused on areas of economic interest, current work of the Australian Passive Seismic Array Project (AusArray) is seeking to create a grid pattern, spaced ~55 km apart, and complemented by semi-permanent higher sensitivity broadband seismic stations. For more information about AusArray click on the following URL: <a href="https://www.ga.gov.au/eftf/minerals/nawa/ausarray">https://www.ga.gov.au/eftf/minerals/nawa/ausarray</a> <b>Data from phase 1 are available on request from clientservices@ga.gov.au - Quote eCat# 135284</b>

The Groundwater Dependent Waterbodies (GDW) dataset is a subset of the Digital Earth Australia (DEA) Waterbodies product that has been combined with the Bureau of Meteorology’s national Groundwater Dependent Ecosystem (GDE) Atlas to produce surface waterbodies that are known/high potential aquatic GDEs. These aquatic GDEs include springs, rivers, lakes and wetlands. Where known/high potential GDEs intersected a DEA waterbody, the entire DEA waterbody polygon was retained and assigned as a GDW. Additional attributes were added to the waterbody polygons to indicate amount of overlap the waterbody had with the GDE(s) as well as the minimum, mean, median and maximum percentage of time that water has been detected in each GDW relative to the total number of clear observations (1986 to present). This web service will display a variety of layers with spatial summary statistics of the GDW dataset. These provide a first-pass representation of known/high potential aquatic GDEs and their surface water persistence, derived consistently from Landsat satellite imagery across Australia.

The Groundwater Dependent Waterbodies (GDW) dataset is a subset of the Digital Earth Australia (DEA) Waterbodies product that has been combined with the Bureau of Meteorology’s national Groundwater Dependent Ecosystem (GDE) Atlas to produce surface waterbodies that are known/high potential aquatic GDEs. These aquatic GDEs include springs, rivers, lakes and wetlands. Where known/high potential GDEs intersected a DEA waterbody, the entire DEA waterbody polygon was retained and assigned as a GDW. Additional attributes were added to the waterbody polygons to indicate amount of overlap the waterbody had with the GDE(s) as well as the minimum, mean, median and maximum percentage of time that water has been detected in each GDW relative to the total number of clear observations (1986 to present). This web service will display a variety of layers with spatial summary statistics of the GDW dataset. These provide a first-pass representation of known/high potential aquatic GDEs and their surface water persistence, derived consistently from Landsat satellite imagery across Australia.