Queensland LiDAR data (Lockyer Valley Project) - Lockyer Valley Regional Council (LGA) - 2010  

Authors / CoAuthors

Grove, R.

Abstract

These datasets cover approximately 1400 sq km in the northern sector of the Lockyer Valley Regional Council and comprise the 2010 Lockyer Valley LiDAR capture project. This project, undertaken by AAM Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 0.25 metre contours in ESRI Shape

Product Type

dataset

eCat Id

74163

Contact for the resource

Keywords

• DEM topographic

• AU-QLD

Australian and New Zealand Standard Research Classification (ANZSRC)

• Topology

• Published_Internal

Publication Date

2011-01-01T00:00:00

Creation Date

Security Constraints

Australian Government Security ClassificationSystem    

Classification - unclassified

Legal Constraints

Special, MOU, etc.

Access - restricted

Use - license

Status

Purpose

Maintenance Information

unknown

Topic Category

elevation

Series Information

Lineage

Airborne Laser Scanning (ALS) data was acquired for the Lockyer Valley project from a fixed wing aircraft between 01 August 2010 and 23 October 2010. DATA PROCESSING - Reduction of the ALS data proceeded without any significant problems. Laser strikes were classified into ground and non-ground points using a single algorithm across the project area. Manual checking and editing of the data classification further improved the quality of the terrain model. During QA of the dataset a few small areas contained poor GPS solutions hence resulting LiDAR data needed to be recaptured (Flight 14). FURTHER PROCESSING - Vegetation: Vegetation points have been classified using an automatic algorithm tailored for the project area. No manual checking of Vegetation points has been undertaken. There may be instances of non-ground strikes being incorrectly classified as vegetation and conversely vegetation strikes remaining classified as non-ground. Buildings: Building points have been classified using an automatic algorithm tailored for the project area. No manual checking of building points has been undertaken. There may be instances of non-ground strikes being incorrectly classified as buildings and conversely building strikes remaining classified as non-ground. Non-ground: Non-ground points have been filtered by removing points within 0.1m of the ground surface to reduce incidence surface 'noise'. Points classified as non-ground may include laser strikes on the surface of water bodies. DEM: An ArcGIS 9.2 Terrain model was created from the LiDAR ground points from which tiled ESRI ASCII grid and ASCII xyz grid were generated. Contours: 0.25m engineering contours have been generated automatically from a smoothed triangulated ground model and visually checked for completeness and logical consistency. No cartographic license has been applied.

Parent Information

Extents

[-27.6961, -27.3925, 151.935, 152.5246]

Reference System

GDA94 / MGA zone 56 (EPSG:28356)

Spatial Resolution

Service Information

Associations

Downloads and Links

Source Information

These datasets cover approximately 1400 sq km in the northern sector of the Lockyer Valley Regional Council and comprise the 2010 Lockyer Valley LiDAR capture project. This project, undertaken by AAM Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las in AHD datum (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - Classified las in Ellipsoidal datum (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 1 metre Digital Elevation Model (DEM) in ESRI binary grid - 0.25 metre contours in ESRI Shape