Like many of the basins along Australia's eastern seaboard, there is currently only a limited understanding of the geothermal energy potential of the New South Wales extent of the Clarence-Moreton Basin. To date, no study has examined the existing geological information available to produce an estimate of subsurface temperatures throughout the region. Forward modelling of a basin structure using its expected thermal properties is the process generally used in geothermal studies to estimate temperatures at depth in the Earth's crust. This process has been validated for one-dimensional models such as a drill hole, where extensive information can be provided for a specific location. The process has also seen increasing use in more complex three-dimensional (3D) models, including in areas of sparse data. The overall uncertainties of 3D models, including the influence of the broad assumptions required to undertake them, are generally only poorly examined by their authors and sometimes completely ignored. New methods are presented in this study which will allow estimates and uncertainties to be addressed in a quantitative and justifiable way. Specifically, this study applies Monte Carlo Analysis to constrain uncertainties through random sampling of statistically congruent populations. Particular focus has been placed on the uncertainty in assigning thermal conductivity values to complex and spatially extensive geological formations using only limited data. These geological formations will typically consist of a range of lithological compositions, resulting in a range of spatially variable thermal conductivity values. As a case study these new methods are then applied to the New South Wales extent of the Clarence-Moreton Basin. The structure of the basin has been built using Intrepid Geophysics' 3D GeoModeller software package using data from existing petroleum drill holes, surface mapping and information derived from the FrOGTech SEEBASE study. A range of possible lithological compositions was determined for each of the major geological layers through application of compositional data analysis, using data from deep wells only (>2000 m). In turn, a range of possible thermal properties was determined from rock samples held by the New South Wales Department of Primary Industries and analysed at the Geoscience Australia laboratories. These populations of values were then randomly sampled to create 120 different forward models which were computed using SHEMAT. The results of these have been interpreted to present the best estimate of the expected subsurface temperatures of the basin, and their uncertainties, given the current state of knowledge. These results suggest that the Clarence-Moreton Basin has a moderate geothermal energy potential within an economic drilling depth. The results also show a significant degree of variability between the different thermal modelling runs, which is likely due to the limited data available for the region.

Accurate seismic velocity model is essential for depth conversion and rock property determination in the context of fluid flow modelling to support site selection for secure storage of carbon dioxide. The Bonaparte CO2 Storage project funded by the Australian Government will assess the carbon dioxide geological storage potential of two blocks in the Petrel Sub-basin on the Australian NW Margin. These blocks were offered as part of the 2009 release of offshore areas for greenhouse gas (GHG) storage assessment. The Petrel Sub-basin is a northwest-trending Paleozoic rift within the southern Bonaparte Basin. The geological reservoirs of interest include the Jurassic Plover Formation and the Early Cretaceous Sandpiper Sandstone. Primary and secondary seals of interest include the Late Jurassic Frigate Formation and the Cretaceous Bathurst Island Group (regional seal). Trapping mechanisms for injected CO2 may include faulted anticlines, stratigraphic traps, salt diapirs and/or migration dissolution and residual trapping. Water depths are generally less than 100m and depths to reservoir/seal pairs range between 800-2500m below the sea surface. All three main types of seismic velocity measurements are available within the area of our study: velocities derived from stacking of multi-channel reflection seismic data; velocities determined in the process of ray tracing modelling of large offset refraction data acquired by the ocean bottom seismographs (OBS) along the coincident reflection/refraction transect, and velocities from well log (sonic, vertical seismic profiling and check shot) measurements.

Rock properties provide the vital link between observed geophysical data and interpreted geology. Geoscience Australia has periodically made measurements of rock properties to support various investigations into the composition and structure of the subsurface. The Rock Properties Project consolidates this information into a single database structure and makes it accessible to external clients via a web delivery application. We have chosen to initially concentrate on mass density and magnetic properties, as these are of prime importance to the important gravity and magnetic datasets maintained for the Australian region by Geoscience Australia. Additional property types and more extensive datasets will be added over time.

The Officer Basin spanning South Australia and Western Australia is the focus of a regional stratigraphic study being undertaken as part of the Exploring for the Future (EFTF) program, an Australian Government initiative dedicated to increasing investment in resource exploration in Australia. Despite numerous demonstrated oil and gas shows, the Officer Basin remains a frontier basin for energy exploration with significant uncertainties due to data availability. Under the EFTF Officer-Musgrave Project, Geoscience Australia acquired new geomechanical rock property data from forty core samples in five legacy stratigraphic and petroleum exploration wells that intersected Paleozoic and Neoproterozoic aged intervals. These samples were subjected to unconfined compressive rock strength tests, Brazilian tensile strength tests and laboratory ultrasonic measurements. Petrophysical properties were also characterised via X-ray computerised tomography scanning, grain density and porosity-permeability analysis. Accurate characterisation of static geomechanical rock properties through laboratory testing is essential. In the modern exploration environment, these datasets are a precompetitive resource that can simplify investment decisions in prospective frontier regions such as the Officer Basin. Appeared in The APPEA Journal 62 S385-S391, 13 May 2022

This OGC WFS web service (generated by Geoserver) serves data from the Geoscience Australia Rock Properties database. The database stores the results of measurements of physical properties of rock and regolith specimens, including such properties as mass density, magnetic susceptibility, magnetic remanence and electrical conductivity. The database also records analytical process information such as method and instrument details where possible.

A deposit of weathered graphic granite at White Rocks, 2 miles south of Queanbeyan, was investigated and the limits of material in it suitable for easily quarryable road metal were determined. The area was divided into two sections: a northern one held for the most part by the Queanbeyan Council, and a southern section at present held privately as a grazing lease. "Indicated" reserves, based on the present quarrying level, of 170,000 cub. yds were established in the northern section. Most of this material will be of the same quality as that being quarried at present; some of the material towards the southern boundary of the lease will however be harder and require more blasting. In the grazing leases "inferred reserves" of 140,000 cub. yds. were delineated. It is expected that this material will be quite suitable for road making but may be slightly inferior in sizing to the material at present being quarried; also it may require more blasting in some portions than the material being quarried at present; it will carry a higher average overburden than the Queanbeyan lease.

The information presented in this paper was collected in 1947-8 by a combined scientific team composed of officers from the Commonwealth Scientific and Industrial Research Organization and the Commonwealth Bureau of Mineral Resources, Geology and Geophysics, who carried out a reconnaissance of the natural resources of the Barkly Region. The subsurface water supplies and the geological features which assist in determining the characteristics of water supplies are discussed in this report.

Six wax-sealed samples of cores were received with a request that they be tested for porosity, permeability and oil and water content. Testing was carried out by Messrs. N.V.H. Hoyling and H.S. Taylor-Rogers at the Newcastle Technical College - to the Principal and Staff of which institution grateful acknowledgment of their co-operation and utilization of their apparatus and laboratory space is made.

In connection with the search for uranium in Australia samples of mill products from producing mines have been examined for radioactivity by the Bureau. Amongst these were several samples from mines at Broken Hill. A preliminary examination showed that the uranium content of the samples was certainly much less than 0.01 per cent. To obtain more accurate data, the samples were re-examined by more sensitive methods, and the results of these are tabulated below.

Bearing in mind Mr. Kitchin's statement that the mica has been recovered from a shallow depth of about six feet only it appears to be of really good quality, and in view of the shortage of clearer types of mica it seems desirable that the deposit should be examined. The four mica specimens submitted for examination are described herein.