The greater Phoenix area in the Bedout Sub-basin has experienced recent exploration success on Australia’s North West Shelf (NWS). Oil and gas discoveries in the Triassic reservoirs of the Keraudren Formation and Locker Shale have revived interest in mapping the distribution and lateral facies variation of the Triassic succession from the Bedout Sub-basin into the adjacent underexplored Beagle and Rowley sub-basins. This multi-disciplinary study integrating structural architecture, sequence stratigraphy, palaeogeography and geochemistry has mapped the spatial and temporal distributions of Triassic source rocks on the central NWS. The Lower‒Middle Triassic palaeogeography is dominated by a deltaic system building from the Bedout Sub-basin into the Beagle Sub-basin. The oil sourced and reservoired within the Lower‒Middle Triassic sequences at Phoenix South 1 is unique to the Bedout Sub-basin, compared to other oils along the NWS. Its mixed land-plant and algal biomarker signature is most likely sourced locally by fluvial-deltaic mudstones within the TR10‒TR14 or TR15 sequences and represents a new petroleum system on the NWS. A Middle Triassic marine incursion is recorded in the Bedout Sub-basin with the development of a carbonate platform while in the Rowley Sub-basin, volcanics have been penetrated at the top of the thick Lower‒Middle Triassic sediment package. The Late Triassic palaeogeographic map suggests a carbonate environment in the Rowley Sub-basin distinct to the clastic-dominated fluvial-deltaic environment in the Beagle Sub-basin. This information combined with results of well-based geochemical analyses highlights the potential for hydrocarbon generation within the Upper Triassic in these sub-basins. This extended abstract was presented at the Australasian Exploration Geoscience Conference (AECG) 2019

Petroleum geochemical datasets and information are essential to government for evidence-based decision making on natural resources, and to the petroleum industry for de-risking exploration. Geoscience Australia’s newly built Data Discovery Portal (https://portal.ga.gov.au/) enables digital discoverability and accessibility to key petroleum geochemical datasets. The portal’s web map services and web feature services allow download and visualisation of geochemical data for source rocks and petroleum fluids, and deliver a petroleum systems framework for northern Australian basins. The Petroleum Source Rock Analytics Tool enables interrogation of source rock data within boreholes and field sites, and facilitates correlation of these elements of the petroleum system within and between basins. The Petroleum Systems Summary Assessment Tool assists the user to search and query components of the petroleum system(s) identified within a basin. The portal functionality includes customised data searches, and visualisation of data via interactive maps, graphs and geoscientific tools. Integration of the petroleum systems framework with the supporting geochemical data enables the Data Discovery Portal to unlock the value of these datasets by affording the user a one-stop access to interrogate the data. This allows greater efficiency and performance in evaluating the petroleum prospectivity of Australia’s sedimentary basins, facilitating and accelerating decision making around exploration investment to ensure Australia’s future resource wealth <b>Citation:</b> Edwards, D.S., MacFarlane, S.K., Grosjean, E., Buckler, T., Boreham, C.J., Henson, P., Cherukoori, R., Tracey-Patte, T., van der Wielen, S., Ray, J. and Raymond, O., 2020. Australian source rocks, fluids and petroleum systems – a new integrated geoscience data discovery portal for maximising data potential. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

<p>Northern Australia contains extensive Proterozoic-aged sedimentary basins with potential energy, mineral, and groundwater resources concealed beneath the surface. The region is remote and largely underexplored with limited data and infrastructure and therefore is considered to have high exploration risk. Exploration for hydrocarbons and basin-hosted base metals, although perceived to have very different exploration models, share a number of important similarities and key parameters. Foremost amongst these is shale geochemistry since the same reduced, organic-rich shales are both a hydrocarbon source rock and a depositional site for base metal mineralisation. Furthermore, anoxic and euxinic (anoxic with free hydrogen sulfide, H2S) water column and sediments are important for both the preservation of organic matter and as a H2S reservoir needed for precipitation of ore minerals after reaction with oxic metalliferous brines. Here we present new organic and inorganic geochemical datasets for shales in the South Nicholson Basin, Lawn Hill Platform and greater McArthur Basin, including the organic-richness of shales and the inorganic geochemistry of redox-sensitive trace metals, to demonstrate changes in water-column chemistry and favourable base metals depositional sites. Parameters such as total organic carbon (TOC) content and redox-sensitive elemental concentrations are used to identify prospective packages with hydrocarbon and base metals mineral resource potential <p>The results reveal many units in the Lawn Hill Platform, South Nicholson Basin and greater McArthur Basin contain organic-rich rocks. A cut-off value of TOC ≥ 2 wt% is used to define several shale and carbonate sequences in the region that are favourable for both hydrocarbon generation and as base metals depositional sites. Inorganic geochemistry results demonstrate a range of paleoredox conditions, from predominantly anoxic, ferruginous conditions with deviations, to sub-oxic and euxinic conditions. Future work mapping the temporal and spatial distribution of this geochemistry, in combination with other mappable geological criteria, is required to create mineral and petroleum systems models that can define prospective fairways across the basins and increase our understanding of resource potential. <p>The precompetitive data generated in this study highlight the utility of shared geochemical datasets for resource exploration in the region. More broadly, this study improves our understanding of the energy and mineral potential across northern Australia, supporting resource decision-making and investment.

The main aim of this study is to use petroleum systems analysis to improve the understanding of the petroleum systems present on the Lawn Hill Platform of the Isa Superbasin. Part A of this report series reported the results of burial and thermal modelling of two wells (Desert Creek 1 and Egilabria 1). Results from the 1-D modelling help other aspects of interest such as the hydrocarbon generation potential and distribution of hydrocarbons by source rock which this publication presents. Modelling uncertainties are reported and described, highlighting knowledge gaps and areas for further work.

Pyrolysis and bulk kinetic studies were used to investigate the hydrocarbon generation potential and source rock facies variability of the marine organic-rich rocks from the Middle Ordovician (Darriwilian) Goldwyer Formation in the Canning Basin, Western Australia. Rock Eval pyrolysis results for the analysed immature to mid-mature calcareous mudstones imply that the upper Goldwyer Sequence I samples contain oil-prone Type I kerogen, while the lower Goldwyer Sequence III samples comprise on average Type II/III oil- and gas-prone kerogen. This is supported by the pyrolysis gas chromatography (Py-GC) results that show the presence of homogenous organofacies in the Goldwyer Sequence I that comprise aliphatic molecular signatures, possibly attributed to the selective preservation of the lipid fraction derived from <i>Gloeocapsomorpha prisca</i> (<i>G. prisca</i>). The heterogeneous organofacies of the Goldwyer Sequence III contains aromatic moieties that are present in similar abundance as the aliphatic compounds. The calcareous claystones of the Goldwyer Sequence I have the capacity to generate paraffinic oil with low wax contents, whereas those of the Goldwyer Sequence III have generative potential for paraffinic-naphthenic-aromatic (P-N-A) low wax oils and gas and condensate. The temperature for hydrocarbon generation for the Type I kerogen, assuming a constant geological heating rate of 3^oC/Ma, is estimated to occur over a narrow interval between 145^oC and 170^oC for the Goldwyer Sequence I samples. Generation from the Type II/III kerogen occurs from 100°C to 160°C in the Goldwyer Sequence III samples which are significantly thermally less stable than observed for the Goldwyer Sequence I samples. The kinetics results for both sequences were used in standard thermal and burial history plots to evaluate their transformation ratio and hydrocarbon generative potential. This provided a basin-specific kinetic input for burial history modelling and a better constraint for kerogen transformation and hydrocarbon generation on the Broome Platform. <b>Citation:</b> Lukman M. Johnson, Reza Rezaee, Gregory C. Smith, Nicolaj Mahlstedt, Dianne S. Edwards, Ali Kadkhodaie, Hongyan Yu,; Kinetics of hydrocarbon generation from the marine Ordovician Goldwyer Formation, Canning Basin, Western Australia,<i> International Journal of Coal Geology</i>, Volume 232, <b>2020</b>, 103623, ISSN 0166-5162, https://doi.org/10.1016/j.coal.2020.103623.

<div>The Adavale Basin is located approximately 850 km west-northwest of Brisbane and southwest of Longreach in south-central Queensland. The basin system covers approximately 100,000 km2 and represents an Early to Late Devonian (Pragian to Famennian) depositional episode, which was terminated in the Famennian by widespread contractional deformation, regional uplift and erosion. </div><div>Burial and thermal history models were constructed for nine wells using existing open file data to assess the lateral variation in maturity and temperature for potential source rocks in the Adavale Basin, and to provide an estimate of the hydrocarbon generation potential in the region.</div>

The Browse Basin is located offshore on Australia's North West Shelf and is a proven hydrocarbon province hosting gas with associated condensate and where oil reserves are typically small. The assessment of a basin's oil potential traditionally focuses on the presence or absence of oil-prone source rocks. However, light oil can be found in basins where source rocks are gas-prone and the primary hydrocarbon type is gas-condensate. Oil rims form whenever such fluids migrate into reservoirs at pressures less than their dew point (saturation) pressure. By combining petroleum systems analysis with geochemical studies of source rocks and fluids (gases and liquids), four Mesozoic petroleum systems have been identified in the basin. This study applies petroleum systems analysis to understand the source of fluids and their phase behaviour in the Browse Basin. Source rock richness, thickness and quality are mapped from well control. Petroleum systems modelling that integrates source rock property maps, basin-specific kinetics, 1D burial history models and regional 3D surfaces, provides new insights into source rock maturity, generation and expelled fluid composition. The principal source rocks are Early-Middle Jurassic fluvio-deltaic coaly shales and shales within the J10-J20 supersequences (Plover Formation), Middle-Late Jurassic to Early Cretaceous sub-oxic marine shales within the J30-K10 supersequences (Vulcan and Montara formations) and K20-K30 supersequences (Echuca Shoals Formation). All of these source rocks contain significant contributions of land-plant derived organic matter and within the Caswell Sub-basin have reached sufficient maturities to have transformed most of the kerogen into hydrocarbons, with the majority of expulsion occurring from the Late Cretaceous until present.

Although the Canning Basin has yielded minor gas and oil within conventional and unconventional reservoirs, the relatively limited geological data available in this under-explored basin hinder a thorough assessment of its hydrocarbon potential. Knowledge of the Paleozoic Larapintine Petroleum Supersystem is restricted by the scarcity of samples, especially recovered natural gases, which are limited to those collected from recent exploration successes in Ordovician and Permo-Carboniferous successions along the margins of the Fitzroy Trough and Broome Platform. To address this shortcoming, gases trapped within fluid inclusions were analysed from 121 Ordovician to Permian rock samples (encompassing cores, sidewall cores and cuttings) from 70 exploration wells with elevated mud gas readings. The molecular and carbon isotopic compositions of these gases have been integrated with gas compositions derived from open-file sources and recovered gases analysed by Geoscience Australia. Fluid inclusion C1–C5 hydrocarbon gases record a snapshot of the hydrocarbon generation history. Where fluid inclusion gases and recovered gases show similar carbon isotopes, a simple filling history is likely; where they differ, a multicharge history is evident. Since some fluid inclusion gases fall outside the carbon isotopic range of recovered gases, previously unidentified gas systems may have operated in the Canning Basin. Interestingly, the carbon isotopes of the fluid-inclusion heavy wet gases converge with the carbon isotopes of the light oil liquids, indicating potential for gas–oil correlation. A regional geochemical database incorporating these analyses underpins our re-evaluation of gas systems and gas–gas correlations across the basin. <b>Citation:</b> Boreham, C.J., Edwards, D.S., Sohn, J.H., Palatty, P., Chen, J.H. and Mory, A.J., 2020. Gas systems in the onshore Canning Basin as revealed by gas trapped in fluid inclusions. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

<div>This study aims to understand both the burial and thermal history of the Carrara Sub-basin to further develop an understanding of possible geo-energy resources, particularly that for unconventional resources such as shale gas. A 1D and 2D model were developed using data from the above mentioned seismic and drilling campaigns, combined with previously published knowledge of the basin. This work contributes to Australia’s Future Energy Resources (AFER) Project, specifically the Onshore Basin Inventories study, which aims to promote exploration and investment in selected underexplored onshore basins. Inventory reports and petroleum systems modelling are being undertaken in select basins to highlight the oil and gas potential in underexplored provinces and to increase the impact of existing datasets.</div><div><br></div>

<div>Lateral variation in maturity of potential Devonian source rocks in the Adavale Basin have been investigated using nine 1D burial thermal and petroleum generation history models, constructed using existing open file data. These models provide an estimate of the hydrocarbon generation potential of the basin. Total organic carbon (TOC) content and pyrolysis data indicate that the Log Creek Formation, Bury Limestone and shale units of the Buckabie Formation have the most potential as source rocks. The Log Creek Formation and the Bury Limestone are the most likely targets for unconventional gas exploration.</div><div>&nbsp;</div><div>The models were constructed used geological information from well completion reports to assign formation tops and stratigraphic ages to then forward-model the evolution of geophysical parameters. The rock parameters, including facies, temperature, organic geochemistry/petrology, were used to investigate source rock quality, maturity and kerogen type. Suitable boundary conditions were assigned for paleo-heat flow, paleo-surface temperature and paleo-water depth. The resulting models were calibrated using bottom hole temperature and measured vitrinite reflectance data.</div><div>&nbsp;</div><div>The results correspond relatively well with published heat flow predictions, however a few wells show possible localised heat effects that differ from the overall basin average. The models indicate full maturation of the Devonian source rocks with generation occurring during the Carboniferous and again during the Late Cretaceous. Any potential accumulations may be trapped in Devonian sandstone, limestone and mudstone units, as well as overlying younger sediments of the Mesozoic Eromanga Basin. Accumulations could be trapped by localised deposits of the Cooladdi Dolomite and other marine, terrestrial clastic and evaporite units around the basin. Migration of the expelled hydrocarbons may be restricted by overlying regional seals, such as the Wallumbilla Formation of the Eromanga Basin. Unconventional hydrocarbons are a likely target for the Adavale Basin with potential either for tight or shale gas in favourable areas from the Log Creek Formation and Bury Limestone.</div> This Abstract was submitted/presented to the 2023 Australian Exploration Geoscience Conference 13-18 Mar (https://2023.aegc.com.au/)