Geoscience Australia carried out marine surveys in Jervis Bay (NSW) in 2007, 2008 and 2009 (GA303, GA305, GA309, GA312) to map seabed bathymetry and characterise benthic environments through colocated sampling of surface sediments (for textural and biogeochemical analysis) and infauna, observation of benthic habitats using underwater towed video and stills photography, and measurement of ocean tides and wavegenerated currents. Data and samples were acquired using the Defence Science and Technology Organisation (DSTO) Research Vessel Kimbla. Bathymetric mapping, sampling and tide/wave measurement were concentrated in a 3x5 km survey grid (named Darling Road Grid, DRG) within the southern part of the Jervis Bay, incorporating the bay entrance. Additional sampling and stills photography plus bathymetric mapping along transits was undertaken at representative habitat types outside the DRG. The dataset contains 11 bathymetry grids of Jervis Bay survey area produced from the processed EM3002 bathymetry data using the CARIS HIPS and SIPS software. Please see the metadata for detailed informaiton.<p><p>This dataset is not to be used for navigational purposes.

The WA Margins Reconnaissance survey, GA-2476 was acquired during October 2008 to January 2009 onboard the RV Sonne as part of the Energy Security Program. Almost 230,000 km² of multibeam bathymetry was acquired over the duration of the survey including all transits. Seafloor features revealed by the backscatter and swath bathymetry have shown that geomorphology of the study areas is diverse. The continental slope of the west Australian margin study areas is characterised by large areas with numerous deeply incised canyons and areas with low-angle slumps and scarps mostly on the upper part of the slope. Other geomorphic features on the continental slope include short escarpments of local extent and small volcanic peaks over the Houtman Sub-basin part of the Perth margin. New bathymetry from the Cuvier Plateau has mapped large volcanic domes, some of them with terraces, ridges, a large previously unmapped valley and two large seamounts (newly named the Cuvier Seamount and the Wallaby seamount). The dataset contains eight XYZ grids of 100m resolution; colour tiff images shaded with sun azimuth 45 degrees and a geotiff of the entire survey with a depth legend to go with the images.<p><p>This dataset is not to be used for navigational purposes.

Geoscience Australia conducted a marine survey to provide seabed environmental information to support the assessment of the CO2 storage potential of the Vlaming Sub-Basin. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2. The major aim of this survey was to look for evidence of any gas fluid seepage at the seabed and wether the location had faults that have been identified in a number of seismic lines. The survey also mapped seabed biota in the area of interest to indentify any biota communities that are related with seepage. This research addresses key questions of the regional seal integrity of the Southern Perth Shale and the potential for storing of CO2 in the Early Cretaceous Gage Sandstone. The survey was conducted by Fugro's Southern Supporter in the Vlaming Sub-Basin, North and South of Rotnest Island between the period of the 17th of March to the 20th of April 2012. Shallow seismic sub bottom profiler data were acquired as well as high resolution multibeam bathymetry and backscatter data during the survey. This dataset is not to be used for navigational purposes.<p><p>This dataset is not to be used for navigational purposes.

A bathymetric survey of Darwin Harbour was undertaken during the period 24 June to 20 August 2011 by iXSurvey Australia Pty Ltd for the Department of Natural Resources, Environment, The Arts and Sport (NRETAS) in collaboration with Geoscience Australia (GA), the Darwin Port Corporation (DPC) and the Australian Institute of Marine Science (AIMS) using GA's Kongsberg EM3002D multibeam sonar system and DPC's vessel 'Matthew Flinders'.

The Davis Coastal Seabed Mapping Survey, Antarctica (GA-4301 / AAS2201 / HI468) was acquired by the Australian Antarctic Division workboat Howard Burton during February-March 2010 as a component of Australian Antarctic Science (AAS) Project 2201 - Natural Variability and Human Induced Change on Antarctic Nearshore Marine Benthic Communities. The survey was undertaken as a collaboration between Geoscience Australia, the Australian Antarctic Division and the Australian Hydrographic Service (Royal Australian Navy). The objectives were to provide multibeam bathymetry and backscatter of the coastal region of the Vestfold Hills around Davis Station, Antarctica, to aid the understanding of sea bed character, benthic habitats, provide a basis for hydrodynamic modelling of water movement around Davis, and to update and extend the navigational charts of the region.

Geoscience Australia carried out a marine survey on Carnarvon shelf (WA) in 2008 (SOL4769) to map seabed bathymetry and characterise benthic environments through colocated sampling of surface sediments and infauna, observation of benthic habitats using underwater towed video and stills photography, and measurement of ocean tides and wavegenerated currents. Data and samples were acquired using the Australian Institute of Marine Science (AIMS) Research Vessel Solander. Bathymetric mapping, sampling and video transects were completed in three survey areas that extended seaward from Ningaloo Reef to the shelf edge, including: Mandu Creek (80 sq km); Point Cloates (281 sq km), and; Gnaraloo (321 sq km). Additional bathymetric mapping (but no sampling or video) was completed between Mandu creek and Point Cloates, covering 277 sq km and north of Mandu Creek, covering 79 sq km. Two oceanographic moorings were deployed in the Point Cloates survey area. The survey also mapped and sampled an area to the northeast of the Muiron Islands covering 52 sq km. The dataset contains 6 bathymetry grids of the Carnarvon Shelf study area produced from the processed EM3002 bathymetry data using the CARIS HIPS and SIPS software. Please see the metadata for detailed information.<p><p>This dataset is not to be used for navigational purposes.

The TOPAS Sea Trials survey GA-2361, was acquired by Geoscience Australia after the installation of the new Sub bottom profiler (TOPAS) onboard the RV Southern Surveyor during the 9th and the 10th of December 2004. The survey loacation was offshore Brisbane. The aim of the survey was to test the new sub bottom profiler installed onboard. The bathymetry grids consists of 5,10 and 40 resolution projected in Easting and Northing WGS84, UTM56S.<p><p>This dataset is not to be used for navigational purposes.

The Petrel Sub-basin CO2 storage 2D seismic survey GA-0336, was acquired by the MV Duke in the Bonaparte Bay, NW Australia for Geoscience Australia between the the 3rd of May to the 24th of June 2012. This survey was part of the Australian government's National Low emission Coal Initiative (NLECI).The purpose was to acquire geophysical data on shallow water (less than 120m water depth) in the Petrel sub-basin to support investigation for CO2 storage potential in the area. Multibeam bathymetry data was acquired by the vessel at the same time as the seismic data. This bathymetry dataset consist of the high resolution bathymetry grids (2m) of all the swath data acquired by the MV Duke.<p><p>This dataset is not to be used for navigational purposes.

The NSW Continental Slopes survey GA-2413, SS10/2006 was acquired by Geoscience australia onboard the RV Southern Surveyor from the 12th of October to the 25th of October 2006. The geographical range stretched from Jervis bay in the South to Port Stephens in the North. The aim was to assess the physical nature of the NSW continental slope, improve our understanding of the surface and subsurface structure of the continental slope and to investigate the history of sediment movement along the continental slope.<p><p>This dataset is not to be used for navigational purposes.

The Petrel Sub-basin Marine Environmental Survey GA-0335 was acquired by the RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was undertaken as a collaboration between Geoscience Australia and the Australian Institute of Marine Science (AIMS) . The purpose was to acquire geophysical and biophysical data on shallow (less than 100m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas.<p><p>This dataset is not to be used for navigational purposes.