The North West Integrated System (NWIS) provides the capability to view the Horizon Power Network which services the communities located within the Pilbara region of Western Australia.

Small-angle neutron scattering (SANS) measurements were performed on 32 rock samples from the southern Georgina Basin, central Australia to assess nanopore anisotropy. Anisotropy can only be determined from oriented core material, hence the samples were cut perpendicular to bedding in cores selected from three wells that intersect the base of the hydrocarbon-bearing, organic-rich middle Cambrian Arthur Creek Formation; the latter is the source rock for both unconventional and conventional plays in the basin. The evolution of anisotropy of two-dimensional SANS intensity profiles with depth (for pore diameters ranging from 10 nm to 100 nm) was quantified and correlated with SANS intensity and total organic carbon (TOC) content. Our results confirm hydrocarbon generation at the base of the Arthur Creek Formation. The nanopore anisotropy in the basal Arthur Creek Formation at the well locations CKAD0001 (oil generation window) and MacIntyre 1 (late oil generation window) varies roughly according to normal compaction. When the Arthur Creek Formation is in the gas window, as sampled at Baldwin 1, there is a strong (negative) correlation between the average vertical-to-horizontal pore shape anisotropy and SANS intensity. The results indicate that unconventional gas production from organic-rich regions of over mature shale may be adversely affected by abnormal pore compaction.

Exploring for the Future (EFTF) is a four-year $100.5 million initiative by the Australian Government conducted by Geoscience Australia in partnership with state and Northern Territory government agencies, CSIRO and universities to provide new geoscientific datasets for frontier regions. As part of this program, Geoscience Australia acquired two new seismic surveys that collectively extend across the South Nicholson Basin (L120 South Nicholson seismic line) and into the Beetaloo Sub-basin of the McArthur Basin (L212 Barkly seismic line). Interpretation of the seismic has resulted in the discovery of new basins that both contain a significant section of presumed Proterozoic strata. Integration of the seismic results with petroleum and mineral systems geochemistry, structural analyses, geochronology, rock properties and a petroleum systems model has expanded the knowledge of the region for energy and mineral resources exploration. These datasets are available through Geoscience Australia’s newly developed Data Discovery Portal, an online platform delivering digital geoscientific information, including seismic locations and cross-section images, and field site and well-based sample data. Specifically for the EFTF Energy project, a petroleum systems framework with supporting organic geochemical data has been built to access source rock, crude oil and natural gas datasets via interactive maps, graphs and analytical tools that enable the user to gain a better and faster understanding of a basin’s petroleum prospectivity. <b>Citation:</b> Henson Paul, Robinson David, Carr Lidena, Edwards Dianne S., MacFarlane Susannah K., Jarrett Amber J. M., Bailey Adam H. E. (2020) Exploring for the Future—a new oil and gas frontier in northern Australia. <i>The APPEA Journal</i><b> 60</b>, 703-711. https://doi.org/10.1071/AJ19080

The Network Capacity Mapping Tool (NCMT) provides the capability to view Western Power’s current and proposed electrical network in the southern region of Western Australia.

The Power System Review (Review) is prepared by the NT Government's Utilities Commission with the aim to provide the routine release of comprehensive and authoritative data to industry participants, prospective participants, customers, regulators and policymakers.

The ca. 1.5–1.3 Ga Roper Group of the greater McArthur Basin is a component of one of the most extensive Precambrian hydrocarbon-bearing basins preserved in the geological record, recently assessed as of 429 million bbl oil (68 million cubic meters of oil) and between 8 and 118 TCF (222.56 billion cubic meters) of gas (in place). It was deposited in an intracratonic sea, referred to here as the McArthur-Yanliao gulf. The Velkerri Formation forms the major deep-water facies of the Roper Group. Trace metal redox proxies from this formation indicate that it was deposited in stratified waters, in which a shallow oxic layer overlay suboxic to anoxic waters. These deep waters became episodically euxinic during periods of high organic carbon export. The Velkerri Formation has organic carbon contents that reach ∼10 wt. %. Variations in organic carbon isotopes are consistent with organic carbon enrichment being associated with increases in primary productivity and export, rather than flooding surfaces or variations in mineralogy. Although deposition of the Velkerri Formation in an intracontinental setting has been well established, recent global reconstructions show a broader mid to low latitude gulf, with deposition of the Velkerri Formation being coeval with the widespread deposition of organic-rich rocks across northern Australia and northern China. The deposition of these organic-rich rocks may have been accompanied by significant oxygenation associated with such widespread organic carbon burial during the Mesoproterozoic. <b>Citation:</b> Grant M. Cox, Alan S. Collins, Amber J. M. Jarrett, Morgan L. Blades, April V. Shannon, Bo Yang, Juraj Farkas, Philip A. Hall, Brendan O’Hara, David Close, Elizabeth T. Baruch; A very unconventional hydrocarbon play: The Mesoproterozoic Velkerri Formation of northern Australia. <i>AAPG Bulletin</i> 2022;; 106 (6): 1213–1237. doi: https://doi.org/10.1306/12162120148

The Source Rock and Fluids Atlas delivery and publication services provide up-to-date information on petroleum (organic) geochemical and geological data from Geoscience Australia's Organic Geochemistry Database (ORGCHEM). The sample data provides the spatial distribution of petroleum source rocks and their derived fluids (natural gas and crude oil) from boreholes and field sites in onshore and offshore Australian basins. The services provide characterisation of source rocks through the visualisation of Pyrolysis, Organic Petrology (Maceral Groups, Maceral Reflectance) and Organoclast Maturity data. The services also provide molecular and isotopic characterisation of source rocks and petroleum through the visualisation of Bulk, Whole Oil GC, Gas, Compound-Specific Isotopic Analyses (CSIA) and Gas Chromatography-Mass Spectrometry (GCMS) data tables. Interpretation of these data enables the characterisation of petroleum source rocks and identification of their derived petroleum fluids that comprise two key elements of petroleum systems analysis. The composition of petroleum determines whether or not it can be an economic commodity and if other processes (e.g. CO2 removal and sequestration; cryogenic liquefaction of LNG) are required for development.

The Browse Basin hosts considerable gas and condensate resources, including the Ichthys and Prelude fields that are being developed for liquefied natural gas (LNG) production. Oil discoveries are sub-economic. This multi-disciplinary study integrating sequence stratigraphy, palaeogeography and geochemical data has mapped the spatial and temporal distribution of Jurassic to earliest Cretaceous source rocks. This study allows a better understanding of the source rocks contribution to the known hydrocarbon accumulations and charge history in the basin, including in underexplored areas. The Jurassic to earliest Cretaceous source rocks have been identified as being the primary sources of the gases and condensates recovered from accumulations in the Browse Basin as follows: - The Lower–Middle Jurassic J10–J20 (Plover Formation) organic-rich source rocks have been deposited along the northeast-southwest trending fluvial-deltaic system associated with a phase of pre-breakup extension. They have charged gas reservoired within J10–J20 accumulations on the Scott Reef Trend and in the central Caswell Sub-basin at Ichthys/Prelude, and in the Lower Cretaceous K40 supersequence on the Yampi Shelf. - Late Jurassic–earliest Cretaceous J30–K10 source rocks are interpreted to have been deposited in a rift, north of the Scott Reef Trend and along the Heywood Fault System (e.g. Callovian–Tithonian J30–J50 supersequences, lower Vulcan Formation). The J30–K10 shales are believed to have sourced wet gas reservoired in the K10 sandstone (Brewster Member) in the Ichthys/Prelude and Burnside accumulations, and potentially similar plays in the southern Caswell Sub-basin. - The organic-rich source rocks observed in the Heywood Graben may be associated with deeper water marine shales with higher plant input into the isolated inboard rift. They are the potential source of fluids reservoired within the Crux accumulation, which has a geochemical composition more closely resembling a petroleum system in the southern Bonaparte Basin.

The Energy component of Geoscience Australia’s Exploring for the Future (EFTF) program is aimed at improving our understanding of the petroleum resource potential of northern Australia, including the Lawn Hill Platform region of the Isa Superbasin. The Paleoproterozoic Isa Superbasin in northwestern Queensland contains organic rich sedimentary units with the potential to host both conventional and unconventional petroleum systems (Gorton & Troup, 2018). On the Lawn Hill Platform, the River and Lawn supersequences of the Isa Superbasin host the recently discovered Egilabria shale gas play and are considered highly prospective shale gas targets. However, the lateral extent of these plays is currently unknown due to the limited well and associated geochemical data. To aid in the identification of new areas with the potential to host active petroleum systems, this work assesses the burial and thermal history of the Lawn Hill Platform (Figure 1) by using organic richness, quality and thermal maturity of source rocks of the Isa Superbasin. This assessment is based on a compilation of updated and quality controlled publicly available total organic carbon (TOC), Rock-Eval pyrolysis and organic matter reflectance data, and combines revised assessments of the depth structure and isopach mapping by Bradshaw et al., (2018, in press). Burial-thermal relationships in the basin have been difficult to determine in the past, usually attributed to multiple hydrothermal events which has resulted in erratic, and occasionally inverted, maturity reflectance profiles (Gorton and Troup, 2018; Glikson, 1993). Additional difficulties that contribute large uncertainties to our understanding are estimating the burial history across the basin, especially the maximum depth of burial and hence the estimated amount of erosion. Initial modelling suggests erosion amounts could range anywhere from several hundreds of meters to several thousands of meters across the Lawn Hill Platform region (Figure 2). Burial and thermal history modelling is calibrated using paleo-maturity data (reflectance profiles as mentioned above, Figure 2), which is poorly constrained. Because of the age (Paleoproterozoic) of the organic matter, reflectance values of alginite and bitumen were used, which are not always comparable to the standard vitrinite reflectance profiles that are typically used for burial and thermal history modelling calibration. In this study other options of burial-thermal model calibrations were assessed to aid in characterising the petroleum potential of this region, including; bottom hole temperature, developing an improved Tmax conversion equation specific to the Isa Superbasin region, using published conversion equations to convert alginite and bitumen reflectance to vitrinite equivalent reflectance, using HI as an indicator of thermal history, oxygen isotopes (δ18O), and fluid inclusion geothermometry. Abstract and poster for presentation at the Australian Organic Geochemistry Conference 2018

Petroleum geochemical datasets and information are essential to government for evidence-based decision making on natural resources, and to the petroleum industry for de-risking exploration. Geoscience Australia’s newly built Data Discovery Portal (https://portal.ga.gov.au/) enables digital discoverability and accessibility to key petroleum geochemical datasets. The portal’s web map services and web feature services allow download and visualisation of geochemical data for source rocks and petroleum fluids, and deliver a petroleum systems framework for northern Australian basins. The Petroleum Source Rock Analytics Tool enables interrogation of source rock data within boreholes and field sites, and facilitates correlation of these elements of the petroleum system within and between basins. The Petroleum Systems Summary Assessment Tool assists the user to search and query components of the petroleum system(s) identified within a basin. The portal functionality includes customised data searches, and visualisation of data via interactive maps, graphs and geoscientific tools. Integration of the petroleum systems framework with the supporting geochemical data enables the Data Discovery Portal to unlock the value of these datasets by affording the user a one-stop access to interrogate the data. This allows greater efficiency and performance in evaluating the petroleum prospectivity of Australia’s sedimentary basins, facilitating and accelerating decision making around exploration investment to ensure Australia’s future resource wealth <b>Citation:</b> Edwards, D.S., MacFarlane, S.K., Grosjean, E., Buckler, T., Boreham, C.J., Henson, P., Cherukoori, R., Tracey-Patte, T., van der Wielen, S., Ray, J. and Raymond, O., 2020. Australian source rocks, fluids and petroleum systems – a new integrated geoscience data discovery portal for maximising data potential. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.