Authors / CoAuthors
Spinoccia, M.
Abstract
Geoscience Australia carried out marine surveys in Jervis Bay (NSW) in 2007, 2008 and 2009 (GA303, GA305, GA309, GA312) to map seabed bathymetry and characterise benthic environments through colocated sampling of surface sediments (for textural and biogeochemical analysis) and infauna, observation of benthic habitats using underwater towed video and stills photography, and measurement of ocean tides and wavegenerated currents. Data and samples were acquired using the Defence Science and Technology Organisation (DSTO) Research Vessel Kimbla. Bathymetric mapping, sampling and tide/wave measurement were concentrated in a 3x5 km survey grid (named Darling Road Grid, DRG) within the southern part of the Jervis Bay, incorporating the bay entrance. Additional sampling and stills photography plus bathymetric mapping along transits was undertaken at representative habitat types outside the DRG. The dataset contains 11 bathymetry grids of Jervis Bay survey area produced from the processed EM3002 bathymetry data using the CARIS HIPS and SIPS software. Please see the metadata for detailed informaiton.<p><p>This dataset is not to be used for navigational purposes.
Product Type
dataset
eCat Id
72004
Contact for the resource
Custodian
Owner
Custodian
Cnr Jerrabomberra Ave and Hindmarsh Dr GPO Box 378
Canberra
ACT
2601
Australia
Digital Object Identifier
Keywords
- Australian and New Zealand Standard Research Classification (ANZSRC)
-
- Marine Geoscience
- ( {1} )
-
- HVC_144641
- ( Project )
-
- AusSeabed
- ( {1} )
-
- Marine Data Bathymetry Grid
- ( Theme )
-
- abiotic surrogates
- ( Theme )
-
- bathymetry
- ( Theme )
-
- marine
- ( Theme )
-
- CERF
- ( {1} )
-
- AU-NSW
- ( {1} )
-
- Published_External
Publication Date
2011-01-01T00:00:00
Creation Date
Security Constraints
Legal Constraints
Status
Purpose
Maintenance Information
asNeeded
Topic Category
geoscientificInformation
Series Information
Lineage
Due to the exceptionally good quality data being acquired, post processing of the raw data was kept to a minimum. Swath data was processed through Caris HIPS/SIPS version 7.2. First a vessel configuration file was created that the coordinates of the motion sensor and DGPS antenna and patch test offsets were recorded. A new project was then created and the vessel configuration file was attached to the project file. The raw swath sonar data, in raw.all format, for each line was then imported into the project and the vessel information assigned to the data. The motion sensor, DGPS and heading data were then cleaned using a filter that averaged adjacent data to remove artifacts. Different sound velocity profiles data for each block were attached to the corresponding raw swath sonar data files to correct the depths for changes in the speed of sound through the water column. Then a new blank field area was defined that specified the geographic area of study and the coordinate system used. The coordinates for all the study areas were WGS84. The data was cleaned by applying several filters that removed any remaining spikes in the bathymetry data using user defined threshold values. A visual inspection of the data for each line was then undertaken where artefacts and noisy data not removed by the filtering process were removed manually using Swath and subset editors modules of the Caris HIPS/SIPS software. In addition, GPS tidal information was used to correct for the tidal variations in the processing. All the data for each bathymetric, motion sensor, DGPS, heading, tide and sound velocity profile data were merged to produce the final processed data file. A weighted grid of the processed data was then created for each Block. The processed data was finally exported as XYZ grid soundings and converted into ArcINFO grid.
Parent Information
Extents
[-35.22, -35.00, 150.60, 150.87]
Reference System
Spatial Resolution
Service Information
Associations
Source Information
CERF Marine Biodiversity Hub