<div>The lithology, geochemistry, and architecture of the continental lithospheric mantle (CLM) underlying the Kimberley Craton of north-western Australia has been constrained using pressure-temperature estimates and mineral compositions for &gt;5,000 newly analyzed and published garnet and chrome (Cr) diopside mantle xenocrysts from 25 kimberlites and lamproites of Mesoproterozoic to Miocene age. Single-grain Cr diopside paleogeotherms define lithospheric thicknesses of 200–250 km and fall along conductive geotherms corresponding to a surface heat flow of 37–40 mW/m 2. Similar geotherms derived from Miocene and Mesoproterozoic intrusions indicate that the lithospheric architecture and thermal state of the CLM has remained stable since at least 1,000 Ma. The chemistry of xenocrysts defines a layered lithosphere with lithological and geochemical domains in the shallow (&lt;100 km) and deep (&gt;150 km) CLM, separated by a diopside-depleted and seismically slow mid-lithosphere discontinuity (100–150 km). The shallow CLM is comprised of Cr diopsides derived from depleted garnet-poor and spinel-bearing lherzolite that has been weakly metasomatized. This layer may represent an early (Meso to Neoarchean?) nucleus of the craton. The deep CLM is comprised of high Cr2O3 garnet lherzolite with lesser harzburgite, and eclogite. The peridotite components are inferred to have formed as residues of polybaric partial mantle melting in the Archean, whereas eclogite likely represents former oceanic crust accreted during Paleoproterozoic subduction. This deep CLM was metasomatized by H2O-rich melts derived from subducted sediments and high-temperature FeO-TiO2 melts from the asthenosphere.</div><div><br></div><div>Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div><div><br></div><div><strong>Citation:</strong></div><div>Sudholz, Z.J., et al. (2023) Mapping the Structure and Metasomatic Enrichment of the Lithospheric Mantle Beneath the Kimberley Craton, Western Australia,&nbsp;<em><i>Geochemistry, Geophysics, Geosystems</i>,</em>&nbsp;24, e2023GC011040.</div><div>https://doi.org/10.1029/2023GC011040</div>

<div>Diamond exploration over the past decade has led to the discovery of a new province of kimberlitic pipes (the Webb Province) in the Gibson Desert of central Australia. The Webb pipes comprise sparse macrocrystic olivine set in a groundmass of olivine, phlogopite, perovskite, spinel, clinopyroxene, titanian-andradite and carbonate. The pipes resemble ultramafic lamprophyres (notably aillikites) in their mineralogy, major and minor oxide chemistry, and initial 87Sr/ 86Sr and <em>ε</em>Nd-<em>ε</em>Hf isotopic compositions. Ion probe U-Pb geochronology on perovskite (806 ± 22 Ma) indicates the eruption of the pipes was co-eval with plume-related magmatism within central Australia (Willouran-Gairdner Volcanic Event) associated with the opening of the Centralian Superbasin and Rodinia supercontinent break-up. The equilibration pressure and temperature of mantle-derived garnet and chromian (Cr) diopside xenocrysts range between 17 and 40 kbar and 750–1320°C and define a paleo-lithospheric thickness of 140 ± 10 km. Chemical variations of xenocrysts define litho-chemical horizons within the shallow, middle, and deep sub-continental lithospheric mantle (SCLM). The shallow SCLM (50–70 km), which includes garnet-spinel and spinel lherzolite, contains Cr diopside with weakly refertilized rare earth element compositions and unenriched compositions. The mid-lithosphere (70–85 km) has lower modal abundances of Cr diopside. This layer corresponds to a seismic mid-lithosphere discontinuity interpreted as pargasite-bearing lherzolite. The deep SCLM (&gt;90 km) comprises refertilized garnet lherzolite that was metasomatized by a silicate-carbonatite melt.</div><div><br></div><div>Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to net zero emissions, strong, sustainable resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div><div><br></div><div><strong>Citation:</strong></div><div>Sudholz, Z. J., et al. (2023). Petrology, age, and rift origin of ultramafic lamprophyres (aillikites) at Mount Webb, a new alkaline province in Central Australia. <i>Geochemistry, Geophysics, Geosystems</i>, 24, e2023GC011120.</div><div>https://doi.org/10.1029/2023GC011120</div>

<div>Lithospheric structure and composition have direct relevance for our understanding of mineral prospectivity. Aspects of the lithosphere can be imaged using geophysical inversion or analysed from exhumed samples at the surface of the Earth, but it is a challenge to ensure consistency between competing models and datasets. The LitMod platform provides a probabilistic inversion framework that uses geology as the fabric to unify multiple geophysical techniques and incorporates a priori geochemical information. Here, we present results from the application of LitMod to the Australian continent. The rasters summarise the results and performance of a Markov-chain Monte Carlo sampling from the posterior model space. Release FR23 is developed using primary-mode Rayleigh phase velocity grids adapted from Fishwick & Rawlinson (2012).</div><div><br></div><div>Geoscience Australia's Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia's geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia's transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia's regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div>

<div>Lithospheric structure and composition have direct relevance for our understanding of mineral prospectivity. Aspects of the lithosphere can be imaged using geophysical inversion or analysed from exhumed samples at the surface of the Earth, but it is a challenge to ensure consistency between competing models and datasets. The LitMod platform provides a probabilistic inversion framework that uses geology as the fabric to unify multiple geophysical techniques and incorporates a priori geochemical information. Here, we present results from the application of LitMod to the Australian continent. The rasters summarise the results and performance of a Markov-chain Monte Carlo sampling from the posterior model space. Release KY22 is developed using the primary-mode Rayleigh phase velocity grids of Yoshizawa (2014).</div><div><br></div><div>Geoscience Australia's Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia's geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia's transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia's regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div>

<div>Building on the national-scale thermochemical tomographic inversions of Haynes & Afonso (2023), we infer regions of subduction-driven metasomatic alteration within the Australia sub-continental lithospheric mantle. Such regions are inferred on the basis of age-corrected magnesium number anomalies for bulk composition of the lithospheric mantle, and the spatial correlation of these features with electrical conductors. This defines a mappable criteria for mineral system conceptual models focused on the transport of melts from re-enriched upper mantle sources. Mapping this feature through stochastic uncertainty propogation of inferred mantle compositions enables us to quantify the level of agreement in the spatial constraints on the feature. Here, we present a voting map that quantifies the relative presence or absence of such features across Australia under any arbitrary model realisation.</div><div><br></div><div>Geoscience Australia's Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and knowledge, we are building a national picture of Australia's geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia's transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia's regional and remote communities. The Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div>

<div><strong>Output Type: </strong>Exploring for the Future Extended Abstract</div><div><br></div><div><strong>Short Abstract: </strong>The continental crust directly hosts or underlies almost all mineral resources on which society depends. Despite its obvious importance its structure is poorly characterised. In particular, its density is surprisingly poorly constrained because it is difficult to directly image from the surface. Here we collate a global database of crustal thickness and velocity constraints. In combination with a compilation of published laboratory experimental constraints on seismic velocity at a range of pressures, we develop a scheme with which to convert seismic velocities into density as a function of pressure and temperature. We apply this approach to the Australian crystalline basement. We find that the Australian crust is highly heterogeneous, ranging in bulk density from 2.7—3.0 g cm-3. Finally, we explore the utility of our database for testing hypotheses about the location and endowment of mineral resources using porphyry copper deposits as an example. Our results provide an improved framework with which to explore the subsidence and thermal evolution of sedimentary basins, as well as probing relationships between deposit types and crustal architecture.</div><div><br></div><div><strong>Citation: </strong>Stephenson, S.N., Hoggard, M.J., Haynes, M.W., Czarnota, K. & Hejrani, B., 2024. Constraints on continental crustal thickness and density structure. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, https://doi.org/10.26186/149336</div>

<div>Raster datasets of inferred magnesium number for the bulk lithospheric mantle across the Australian continent. The magnesium number is an elemental ratio, defined by Mg / (Mg + Fe), which correlates to the relative enrichment or depletion in incompatible elements. Oxide concentrations are inferred in from thermo-chemical inverse modelling of Rayleigh phase velocities, surface heat flow, geoid anomalies, and topography. The magnesium number rasters summarise the results of a Markov-chain Monte Carlo sampling of the posterior model space from an ensemble of plausible candidate models. Model release 'FR23' is developed using primary-mode Rayleigh phase velocity grids adapted from Fishwick & Rawlinson (2012; "3-D structure of the Australian lithosphere from evolving seismic datasets"). Model release 'KY22' is developed using the primary-mode Rayleigh phase velocity grids of Yoshizawa (2014; "Radially anisotropic 3-D shear wave structure of the Australian lithosphere and asthenosphere from multi-mode surface waves"). All models are products of the Exploring for the Future program.</div>

<div><strong>Output Type: </strong>Exploring for the Future Extended Abstract</div><div><br></div><div><strong>Short Abstract: </strong>The thickness and thermal structure of continental lithosphere influences the location of seismic and volcanic hazards and is important for predicting long-term evolution of landscapes, sedimentary basins, and the distribution of natural resources. In this project, we have developed new, continental-scale models of the thermomechanical structure of the Australian plate. We begin by compiling an inventory of >15,000 geochemical analyses of peridotitic xenoliths and xenocrysts from across the continent that have been carried up to the surface in volcanic eruptions. We apply thermobarometric techniques to constrain their pressure and temperature of equilibration and perform steady-state heat flow modelling to assess the paleogeotherm beneath these sites. We subsequently use the paleogeotherms as constraints in a Bayesian calibration of anelasticity at seismic frequencies to provide a mapping between seismic velocity and temperature as a function of pressure. We apply this method to several regional-scale seismic tomography models, allowing the temperature to be continuously mapped throughout the Australian lithospheric and asthenospheric mantle. Our models include assessment of uncertainties and can be used to query thermomechanical properties, such as lithospheric thickness, heat flow through the Moho, and the Curie depth.</div><div><br></div><div><strong>Citation: </strong>Hoggard, M.J., Hazzard, J., Sudholz, Z., Richards, F., Duvernay, T., Austermann, J., Jaques, A.L., Yaxley, G., Czarnota, K. & Haynes, M., 2024. Thermochemical models of the Australian plate. In: Czarnota, K. (ed.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra. https://doi.org/10.26186/149411</div>