This Eucla Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Eucla Basin, located along Australia's southern margin, covers an extensive area of approximately 1,150,000 square kilometres, housing the world's largest grouping of onshore Cenozoic marine sediments. It stretches over 2000 km from east to west and has four main subdivisions: Scaddan Embayment, Esperance Shelf, Nullarbor Shelf, and Yalata Sub-basin offshore. The basin extends about 350 km inland from the modern southern Australian coastline and terminates around 200 km offshore where it meets sediments of the Australian-Antarctic Basin. The sedimentary succession is largely consistent throughout the entire basin. In the west, it overlaps with the Yilgarn Craton and Albany-Fraser Orogen, while in the east, the Gawler Craton and Officer Basin separate it from the Musgrave Province. The basin contains mainly Cenozoic sediments, with thicker sequences in the east due to sediment movement and regional elevation differences. The onshore Eucla Basin hosts an unfaulted sheet of sediment deposited over a south-sloping shelf during several marine transgressions. The basal units rest on a prominent unconformity above the Bight Basin, indicating a break in deposition during the separation of Australia and Antarctica. The sedimentary sequence comprises various units such as the Hampton Sandstone, Pidinga Formation, and Werillup Formation, followed by the Wilson Bluff Limestone, Abrakurrie Limestone, Nullarbor Limestone, and Roe Calcarenite. The basin's geological history is marked by significant events such as marine transgressions during the Eocene, leading to the deposition of extensive limestone formations. The Miocene saw slight tilting of the basin, exposing the Nullarbor Plain to the atmosphere and limiting further sediment deposition. During the late Miocene to Pliocene, barrier and lagoonal transgressions contributed to the formation of the Roe Calcarenite. The Pliocene period witnessed intense karstification and the development of ferricrete and silcrete, resulting in the unique modern-day topography of the region.

This Bonaparte Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Bonaparte Basin is a large sedimentary basin off the north-west coast of Australia, encompassing both offshore and onshore areas. It has undergone multiple phases of extension, deposition, and tectonic inversion from the Paleozoic to Cenozoic periods. The Petrel Sub-basin, situated on the eastern margin, exhibits a north-west trending graben/syncline and exposes lower Paleozoic rocks onshore while transitioning to upper Paleozoic, Mesozoic, and Cenozoic sediments offshore. Onshore, the basin's geological structures reflect two dominant regimes: north to north-north-east trending Proterozoic basement structures associated with the Halls Creek Mobile Zone, and north-north-west trending basin structures linked to the rifting and later compressional reactivation of the Petrel Sub-basin. The Petrel Sub-basin has experienced growth and tectonic inversion since the Paleozoic, marked by volcanic activity, deposition of clastics and carbonates, and extension events. During the Devonian, extension occurred along faults in the Ningbing Range, leading to the deposition of clastics and carbonates. The Carboniferous to Permian period witnessed offshore extension associated with the Westralian Superbasin initiation, while onshore deposition continued in shallow marine and transitional environments. Thermal subsidence diminished in the Early Permian, and subsequent compression in the mid-Triassic to Early Jurassic reactivated faults, resulting in inversion anticlines and monoclines. After the Early Jurassic, the sub-basin experienced slow sag with predominantly offshore deposition. Post-Cretaceous deformation caused subsidence, and an Early Cretaceous transgression led to shallow marine conditions and the deposition of chert, claystone, and mudstones. Mid-Miocene to Recent compression, related to continental collision, reactivated faults and caused localized flexure. The stratigraphy of the onshore Bonaparte Basin is divided into Cambro-Ordovician and Middle Devonian to Early Permian sections. Studies have provided insights into the basin's stratigraphy, with an update to the Permo-Carboniferous succession based on seismic interpretation, borehole data integration, field validation, and paleontological information. However, biostratigraphic subdivision of the Carboniferous section remains challenging due to poorly constrained species definitions, leading to discrepancies in the application of biozonations.

This Maryborough-Nambour Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Maryborough Basin is a half-graben intracratonic sag basin mainly filled with Early Cretaceous rocks, overlain by up to 100 m of Cenozoic sediments. It adjoins the older Nambour Basin to the south, comprising Triassic to Jurassic rocks. The boundary between the basins has shifted due to changes in sedimentary unit classifications, with the Cretaceous units now restricted to the Maryborough Basin and Jurassic and older units assigned to the Nambour Basin. Both basins are bounded to the west and unconformably overlies older Permian and Triassic rocks in the Gympie Province and Wandilla Province of the New England Orogen. In the south of the Nambour Basin, it partly overlaps with the Triassic Ipswich Basin. The Nambour Basin in the south is primarily composed of the Nambour Formation, with interbedded conglomerate, sandstone, siltstone, shale, and minor coal. Overlying this is the Landsborough Sandstone, a unit with continental, fluviatile sediments and a thickness of up to 450 m. In the north, the Duckinwilla Group contains the Myrtle Creek Sandstone and the Tiaro Coal Measures, which were formerly considered part of the Maryborough Basin but are now associated with the northern Nambour Basin. In contrast, the Maryborough Basin consists of three main Cretaceous units and an upper Cenozoic unit. The Grahams Creek Formation is the deepest, featuring terrestrial volcanic rocks, volcaniclastic sedimentary rocks, and minor pyroclastic rocks. The overlying Maryborough Formation was deposited in a continental environment with subsequent marine incursion and includes mudstone, siltstone, minor sandstone, limestone, conglomerate, and tuff. The upper Cretaceous unit is the Burrum Coal Measures, comprising interbedded sedimentary rocks deposited in fluvial to deltaic environments. The uppermost unit, the Eocene to Miocene Elliott Formation, includes sandstone, siltstone, conglomerate, and shale deposited in fluvial to deltaic environments. Cenozoic sediments overlying the Elliott Formation consist of Quaternary alluvium, coastal deposits, and sand islands like Fraser Island, influenced by eustatic sea level variations. Volcanic deposits and freshwater sediments also occur in some areas. Adjacent basins, such as the Clarence-Moreton Basin and Capricorn Basin, have stratigraphic correlations with the Maryborough Basin. The Oxley Basin lies to the south, overlying the Ipswich Basin. In summary, the Maryborough Basin and the older Nambour Basin exhibit distinct geological characteristics, with varying rock formations, ages, and sedimentary features, contributing to the diverse landscape of the region.

This Wiso Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Wiso Basin, a large intra-cratonic basin in the central Northern Territory, covers about 140,000 square kilometres and is part of the Centralian Superbasin. It is bounded by the Tennant and Tanami regions to the east and west, while a thrust fault separates it from the Arunta Region to the south. The basin adjoins the Georgina Basin in the southeast and joins the Daly and Georgina basins beneath the Cretaceous strata of the Carpentaria Basin in the north. The basin contains a relatively flat, undeformed succession of strata that gently dip towards the main depo-centre, the Lander Trough. About 80% of the basin consists of shallow middle Cambrian strata, while the remaining portion is within the Lander Trough, containing a diverse succession of Cambrian, Ordovician, and Devonian units. The depositional history and stratigraphy reveal that early Cambrian saw widespread basaltic volcanism, with the Antrim Plateau Volcanics forming the base layer and aquitard of the Wiso Basin. The middle Cambrian deposits include the Montejinni Limestone, the oldest sedimentary unit, followed by the Hooker Creek Formation and the Lothari Hills Sandstone. The uppermost Cambrian unit is the Point Wakefield beds. The Ordovician deposits consist of the Hansen River beds, primarily composed of fossiliferous sandstone and siltstone deposited in shallow marine environments. The Devonian unit capping the basin is the Lake Surprise Sandstone, found in the Lander Trough area, formed in shallow marine, shoreline, and fluvial environments during the Alice Springs Orogeny. Three main hypotheses have been proposed for the formation of the Lander Trough: a large crustal downwarp before thrusting of Paleoproterozoic rocks, the formation of a half-graben by faulting along the southern boundary, or the formation of two en-echelon synclines by vertical block movement. While the majority of the Wiso Basin consists of shallow middle Cambrian rocks, the Lander Trough presents a more varied stratigraphic sequence, holding potential for Neoproterozoic and early Cambrian rocks. However, further drilling is needed to verify this. The presence of similar units in neighbouring basins provides valuable insight into the basin's geological history and development.

This Carnarvon Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Carnarvon Basin is a large sedimentary basin covering the western and north-western coast of Western Australia, stretching over 1,000 km from Geraldton to Karratha. It is predominantly offshore, with over 80% of the basin located in water depths of up to 4,500 m. The basin is elongated north to south and connects to the Perth Basin in the south and the offshore Canning Basin in the north-east. It is underlain by Precambrian crystalline basement rocks. The Carnarvon Basin consists of two distinct parts. The southern portion comprises onshore sub-basins with mainly Paleozoic sedimentary rocks extending up to 300 km inland, while the northern section consists of offshore sub-basins containing Mesozoic, Cenozoic, and Paleozoic sequences. The geological evolution of the Southern Carnarvon Basin was shaped by multiple extensional episodes related to the breakup of Gondwana and reactivation of Archean and Proterozoic structures. The collision between Australia and Eurasia in the Mid-Miocene caused significant fault reactivation and inversion. The onshore region experienced arid conditions, leading to the formation of calcrete, followed by alluvial and eolian deposition and continued calcareous deposition offshore. The Northern Carnarvon Basin contains up to 15,000 m of sedimentary infill, primarily composed of siliciclastic deltaic to marine sediments from the Triassic to Early Cretaceous and shelf carbonates from the Mid-Cretaceous to Cenozoic. The basin is a significant hydrocarbon province, with most of the resources found within Upper Triassic, Jurassic, and Lower Cretaceous sandstone reservoirs. The basin's development occurred during four successive periods of extension and thermal subsidence, resulting in the formation of various sub-basins and structural highs. Overall, the Carnarvon Basin is a geologically complex region with a rich sedimentary history and significant hydrocarbon resources. Exploration drilling has been ongoing since 1953, with numerous wells drilled to unlock its hydrocarbon potential.

This Karumba Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Karumba Basin is a shallow geological basin in Queensland, Australia, composed of sedimentary rocks and unconsolidated sediments that cover the Mesozoic Carpentaria Basin. Deposition started during the Late Cretaceous to Early Paleocene and has continued into the Holocene. The basin extends from western Cape York Peninsula into the Gulf of Carpentaria, where it connects with Cenozoic sediment deposits in Papua New Guinea. Although the sediments in both areas share lithostratigraphic and biostratigraphic similarities, their tectonic histories differ. The basin's structural geology is relatively uniform, with a significant downwarp known as the Gilbert-Mitchell Trough in Cape York Peninsula and another depocenter offshore in the Gulf of Carpentaria. The depositional history and stratigraphy of the Karumba Basin can be divided into three cycles of deposition, erosion, weathering, and the formation of stratigraphic units. The earliest cycle (the Bulimba Cycle) began in the Late Cretaceous to Early Paleocene, with episodes of significant uplift along the eastern margins of the basin. This resulted in the deposition of the Bulimba Formation and the Weipa Beds, primarily consisting of claystone, sandstone, conglomerate, and siltstone with minor coal layers. This cycle was followed by a period of planation and deep weathering, creating the Aurukun Surface. The second cycle (the Wyaaba Cycle) was initiated by large-scale earth movements along the Great Dividing Ranges, forming much of the eastern boundary of the Karumba Basin, and leading to the formation of the Wyaaba beds and other equivalent units. These beds consist mainly of fluvial to paralic clay-rich sandstone, conglomerate, siltstone, and claystone. In the south-west, Oligocene to Pliocene limestone deposits also formed in lacustrine settings, and were sourced from and deposited upon the underlying Georgina Basin. The cycle ended with ensuing periods of erosion and weathering and the development of the Pliocene Kendall Surface, as well as widespread basaltic volcanism. The final cycle (the Claraville Cycle) started in the Pliocene and continues to the present. It has experienced several episodes of uplift and deposition controlled by sea level change, climate variability and volcanism in the south. The Claraville beds are unconsolidated sediments, chiefly comprised of clayey quartzose sand and mud with minor gravels, reaching approximately 148 m thickness offshore, and approximately 70 m onshore. As this cycle is still ongoing, no terminal surface has been formed, and most units consist of unconsolidated surficial sediments.

A compilation of thematic summaries of 42 Australian Groundwater Provinces. These consistently compiled 42 summaries comprise the National Hydrogeological Inventory. The layer provides the polygons for each groundwater province in the inventory and thematic information for each province, including location and administration information, demographics, physical geography, surface water, geology, hydrogeology, groundwater, groundwater management and use, environment, land use and industry types and scientific stimulus.

This Gippsland Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Gippsland Basin is an asymmetrical east-trending rift structure that originated during rifting in the Late Jurassic to Early Cretaceous, as Australia and Antarctica began to separate. Over time, it developed into a continental passive margin basin, with sedimentation continuing to the present day. The basin is characterized by four main phases of tectonic evolution, interspersed with eustatic sea-level variations: initial rifting and extension, mid-Cretaceous contraction, renewed extension, and cessation of rifting in the middle Eocene. The basin's geological structures consist of mainly east to north-east trending features, with the west dominated by north-east structures due to the influence of basement trends. Major fault systems are prominent, compartmentalizing the basin into platforms and depressions separated by bedrock highs. The basin's complex stratigraphic succession reveals fluvial, deltaic, marginal marine, and open marine depositional environments. The sedimentary sequence includes terrigenous siliciclastic sediments from the Upper Cretaceous to Eocene, followed by post-rift sands, clays, coals, and limestones/marls of Oligocene to Holocene age. The Gippsland Basin's sediments are subdivided into four main stratigraphic groups: the Strzelecki, Latrobe, Seaspray, and Sale groups. The Strzelecki Group, dating from the Late Jurassic to Early Cretaceous, consists of non-marine sedimentary rocks deposited in fluvial and lacustrine environments. The Latrobe Group, from Late Cretaceous to early Oligocene, contains siliciclastic sediments deposited in various non-marine to marginal marine settings, showing significant lateral lithofacies variations. The Seaspray Group, dating from Oligocene to Pliocene, formed during a post-rift phase, characterized by marine limestone and marl units and continental clastic sediments. Lastly, the Sale Group consists of Miocene-to-Recent continental clastic sediments forming a thin veneer over the onshore portion of the basin. The Gippsland Basin also contains several basaltic lava fields, with two notable volcanic units—the Thorpdale Volcanics and Carrajung Volcanics—part of the Older Volcanics in Victoria. Overall, the Gippsland Basin's geological history and diverse sedimentary deposits make it a significant area for various geological and geophysical studies, including its hydrocarbon resources concentrated in offshore Latrobe Group reservoirs.

This South Nicholson Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. This South Nicholson Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The South Nicholson Basin is a Mesoproterozoic sedimentary basin spanning Queensland and the Northern Territory and is bordered by neighbouring provinces and basins. The basin unconformably overlies the Lawn Hill Platform of the Mount Isa Province to the east, is bound by the Warramunga and Davenport provinces to the south-west, the Murphy Province to the north and the McArthur Basin to the north-west. It extends southwards under younger cover sequences. Rock units in the basin are correlated with the Roper Group in the McArthur Basin, forming the 'Roper Superbasin.' The underlying Mount Isa Province contains potential shale gas resources. The basin mainly consists of sandstone- and siltstone-bearing units, including the South Nicholson Group, with a prevailing east to east-northeast structural grain. Mild deformation includes shallowly plunging fold axes and numerous faults along a north-west to south-east shortening direction. Major geological events affecting the South Nicholson Basin region include the formation of the Murphy Province's metamorphic and igneous rocks around 1850 million years ago (Ma). The Mount Isa Province experienced deposition in the Leichhardt Superbasin (1800 to 1750 Ma) and Calvert Superbasin (1725 to 1690 Ma). The Isa Superbasin, with extensional growth faulting in the Carrara Sub-basin (~1640 Ma), deposited sediments from approximately 1670 to 1590 Ma. Subsequently, the South Nicholson Group was deposited around 1500 to 1430 Ma, followed by the Georgina Basin's sedimentation. The basin shows potential for sandstone-type uranium, base metals, iron ore, and petroleum resources, while unconventional shale and tight gas resources remain largely unexplored. The Constance Sandstone holds promise as a petroleum reservoir, and the Mullera Formation and Crow Formation serve as potential seals.

This Ngalia Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Ngalia Basin is an elongate, east-trending basin over 500 km long and 90 km wide. It occurs mostly in the Northern Territory, with limited occurrence in Western Australia. The Ngalia Basin is an intra-cratonic sedimentary basin in a structural downwarp formed by a faulted asymmetrical syncline. The basin began to form about 850 Ma, and contains a Neoproterozoic to Carboniferous sedimentary succession. Sedimentation ceased in response to the 450 to 300 Ma Alice Springs Orogeny. The maximum stratigraphic thickness of the Ngalia Basin is about 5000 m. The basin contains mainly arenaceous sedimentary rocks, with lesser fine-grained rock types and some carbonates. Fining upwards sedimentary cycles are commonly preserved and capped by calcite-cemented fine-grained sandstone and siltstone. Tectonic events disrupted deposition during basin evolution and led to at least ten unconformities. There are many disconformable contacts, with angular unconformities common in areas with abundant faulting. The upper-most arkosic sandstone formations in the Ngalia Basin are the Mount Eclipse Sandstone and the Kerridy Sandstone. These units have an aggregate thickness of several hundreds of metres and are the main aquifers within the Ngalia Basin sequence. There is some interstitial porosity, especially in the Mount Eclipse Sandstone, although joints and fissures associated with faulting provide significant secondary permeability. These aquifers provide good supplies of potable to brackish groundwater, and supply the community borefield at Yuendumu. The Ngalia Basin is almost entirely concealed by Cenozoic cover, including Palaeogene-Neogene palaeovalley, lake and alluvial fan sediment systems and Quaternary aeolian sands. Shallow aquifers with brackish to potable water occur in many palaeovalleys sediments overlying the basin.