Authors / CoAuthors
Lai, E.C.S. | Dixon-Jain, P. | Kilgour, P.L. | Ransley, T. R.
Abstract
<p>Summary <p>Spring point locations compiled for the Nulla Basalt Province <p>A compilation of spring locations as identified through various methods, including existing Queensland Springs Database, topographic mapping, fieldwork visits, landholder citizen scientist mapping, and inspection for neighbouring similar features in Google Earth. This compilation has had locations adjusted through inspecting visible imagery and elevation data to identify the likely positions of springs at higher resolution.
Product Type
dataset
eCat Id
133457
Contact for the resource
Point of contact
Cnr Jerrabomberra Ave and Hindmarsh Dr GPO Box 378
Canberra
ACT
2601
Australia
Resource provider
Point of contact
- Contact instructions
- MEG
Digital Object Identifier
Keywords
- theme.ANZRC Fields of Research.rdf
-
- EARTH SCIENCESGEOLOGY
- ( Project )
-
- Exploring for the Future
- ( Project )
-
- EFTF
- ( Project )
-
- Upper Burdekin
- ( Stratum )
-
- Nulla Basalt
- ( Discipline )
-
- hydrogeology
- ( Theme )
-
- discharge
- ( Theme )
-
- groundwater
- ( Theme )
-
- spring
-
- Published_External
Publication Date
2020-04-24T05:26:49
Creation Date
Security Constraints
Legal Constraints
Status
completed
Purpose
Maintenance Information
asNeeded
Topic Category
geoscientificInformation
Series Information
Lineage
This dataset is a compilation of numerous methods to identify spring locations as point features around the Nulla Basalt Province, as part of the Upper Burdekin groundwater project within Exploring for the Future. In addition, the locations of these points have been manually altered through detailed analysis of high resolution imagery and elevation data acquired as part of the same project. This compilation of spring locations is not considered an exhaustive suite of springs, as it is acknowledged that other clusters could be found in areas not examined thoroughly. <p>The presence of springs, and the initial locations for these springs, are derived from several methods: <p>1. Spring point locations from Queensland Springs Database (Queensland Herbarium 2016) <p>2. Spring locations identified in NATMAP Topographic Mapping 1:250,000 scale map sheets (Geoscience Australia 2008) <p>3. Locations of springs visited during hydrochemical sampling fieldwork campaigns as part of the project, as recorded by GPS devices carried by Geoscience Australia field officers. These included springs alluded to by landholders. <p>4. Locations marked by a landholder citizen scientist (at Felspar Station) identifying locations known to be springs on an A0 paper map <p>5. Locations of additional features identified by inspecting Google Earth for areas in similar appearance to those noted above, as conducted by Queensland Department of Environment and Science officers. <p>These five sets of spring locations were compiled together, and duplicates merged into a single ID. A manual process of refining the spring locations was undertaken for all points by an officer from Geoscience Australia. This pinpointing process involved examining visible imagery (e.g. ESRI World Imagery and LiDAR RGB imagery) in conjunction with digital elevation models and derived slope and aspect rasters (SRTM 1s and high-resolution LiDAR where available). The locations of watercourses, slope changes, and vegetation patterns suggested the likely positions of springs. This produced a new set of coordinates. A shapefile was created as a point dataset based on these coordinates chosen, allowing further details to be provided in distinct columns for an attribute table. <p>The attribute table describes the source datasets for these inputs, with the ID from these marked where relevant. Blank cells in these columns indicate that this spring was not derived from this dataset. <p> - QldSprDb = the spring ID from the Queensland Springs Database <p> - Nul_JH = the spring ID from the Queensland Department of Environment and Science dataset <p> - Felspar = the spring ID from the landholder at Felspar Station <p> - Toomba = the sample IDs for springs visited by Geoscience Australia staff conducting fieldwork at Toomba Station <p> - Topo250k = spring names identified from the NATMAP topographic mapping
Parent Information
Extents
[-21.8615, -18.5629, 144.50, 146.35]
Reference System
GDA94 (EPSG:4283)
Spatial Resolution
Service Information
Associations
Downloads and Links
Source Information