<div>We have investigated whether water-saturated residual oil zones (ROZs), sometimes associated with conventional Australian hydrocarbon plays, could provide a CO2 storage resource and supplement depleted field storage. Our petrophysical study demonstrates that ROZs occur in Australia’s hydrocarbon-rich regions, particularly in the Cooper-Eromanga Basin. ROZs with more than 10% residual oil saturation are uncommon, likely due to small original oil columns and lower residual saturations retained in sandstone reservoirs than in classic, carbonate-hosted North American ROZs. Extensive, reservoir-quality rock is found below the deepest occurring conventional oil in many of the fields in the Eromanga Basin, potentially offering significant CO2 storage capacity. Multiphase compositional flow modelling was used to estimate the CO2 storage efficiency of typical Australian ROZs. We developed a novel modelling methodology that first captures oil migration events leading to the formation of ROZs. Modelling CO2 storage over a 20-year injection period demonstrates that CO2-oil interactions increase the density and viscosity of CO2, enhancing CO2 sweep efficiency and lateral flow, improving storage efficiency. The extent of these effects depends on the quantity and spatial distribution of residual oil in place and the miscibility of CO2 at reservoir conditions. Presented at the Australian Energy Producers (AEP) Conference & Exhibition (https://energyproducersconference.au/conference/)

<div>The “Australia’s Future Energy Resources” (AFER) project, funded under the Government’s “Exploring for the Future” (EFTF) program has been completed. The project’s four modules have evaluated a mixture of energy resource commodities, including natural gas, hydrogen, subsurface storage opportunities for carbon dioxide and hydrogen. They are complimented by several targeted basin inventories which outline the current geological knowledge of energy resources in underexplored, data-poor regions. Several publicly available data sets have been generated and published under the AFER project, including 3,750&nbsp;line-km of reprocessed 2D seismic data, acquired in the Pedirka and western Eromanga basins, of which key lines have been interpreted and integrated with geological and petrophysical well log data. Relative prospectivity maps have been produced for five energy resource commodities from 14&nbsp;play intervals to show the qualitative variability in prospectivity of these resources, including quantitative resource assessments where warranted. Results from the AFER project have helped to identify and geologically characterise the required energy resource commodities to accelerate Australia’s path to net zero emissions.</div> Presented at the Australian Energy Producers (AEP) Conference & Exhibition (https://energyproducersconference.au/conference/)

<div>Lateral variation in maturity of potential Devonian source rocks in the Adavale Basin has been investigated using nine 1D burial, thermal and petroleum generation history models, constructed using existing open file data. These models provide an estimate of the hydrocarbon generation potential of the basin. Total organic carbon (TOC) content and pyrolysis data indicate that the Log Creek Formation, Bury Limestone and shale units of the Buckabie Formation have the most potential as source rocks. The Log Creek Formation and the Bury Limestone are the most likely targets for unconventional gas exploration.</div><div>The models were constructed using geological information from well completion reports to assign formation tops and stratigraphic ages, and then forward model the evolution of geophysical parameters. The rock parameters, including facies, temperature, organic geochemistry and petrology, were used to investigate source rock quality, maturity and kerogen type. Suitable boundary conditions were assigned for paleo-heat flow, paleo-surface temperature and paleo-water depth. The resulting models were calibrated using bottom hole temperature and measured vitrinite reflectance data.</div><div>The results correspond well with published heat flow predictions, although a few wells show possible localised heat effects that differ from the basin average. The models indicate that three major burial events contribute to the maturation of the Devonian source rocks, the first occurring from the Late Devonian to early Carboniferous during maximum deposition of the Adavale Basin, the second in the Late Triassic during maximum deposition of the Galilee Basin, and the third in the Late Cretaceous during maximum deposition of the Eromanga Basin. Generation in the southeastern area appears to have not been effected by the second and third burial events, with hydrocarbon generation only modelled during the Late Devonian to early Carboniferous event. This suggests that Galilee Basin deposition was not significant or was absent in this area. Any potential hydrocarbon accumulations could be trapped in Devonian sandstone, limestone and mudstone units, as well as overlying younger sediments of the Mesozoic Eromanga Basin. Migration of the expelled hydrocarbons may be restricted by overlying regional seals, such as the Wallumbilla Formation of the Eromanga Basin. Unconventional hydrocarbons are a likely target for exploration in the Adavale Basin, with potential for tight or shale gas from the Log Creek Formation and Bury Limestone in favourable areas.</div>

<div>Gas production from the Inner Otway Basin commenced in the early 2000s but the deep-water part of this basin remains an exploration frontier. Historically, the understanding of plays in this region were largely model driven and therefore the ground-truthing of depositional environments (DE) and gross depositional environments (GDE) are critical. This aspect has been investigated for the Sherbrook Supersequence (SS) by the integration of legacy wireline and core data, with regional 2D seismic facies mapping of new and reprocessed data from Geoscience Australia’s 2020 Otway Basin seismic program. Core observations were matched to wireline logs and seismic facies with resulting well based DE interpretations calibrated to seismic resolution Regional GDE intervals. Integration of well and seismic observations lead to the compilation of a basin-wide Regional GDE map for the Sherbrook SS. This GDE map indicates the distribution of Sherbrook SS play elements such as source rock, seal and reservoir, especially across the Deep Water Otway Basin where well data is sparse.</div> Published in The APPEA Journal 2023. <b>Citation:</b> Cubitt Chris, Abbott Steve, Bernardel George, Gunning Merrie-Ellen, Nguyen Duy, Nicholson Chris, Stoate Alan (2023) Cretaceous depositional environment interpretation of offshore Otway Basin cores and wireline logs; application to the generation of basin-scale gross depositional environment maps. <i>The APPEA Journal</i><b> 63</b>, S215-S220. https://doi.org/10.1071/AJ22090

<div>Disruptions to the global supply chains of critical raw materials (CRM) have the potential to delay or increase the cost of the renewable energy transition. However, for some CRM, the primary drivers of these supply chain disruptions are likely to be issues related to environmental, social, and governance (ESG) rather than geological scarcity. Herein we combine public geospatial data as mappable proxies for key ESG indicators (e.g., conservation, biodiversity, freshwater, energy, waste, land use, human development, health and safety, and governance) and a global dataset of news events to train and validate three models for predicting “conflict” events (e.g., disputes, protests, violence) that can negatively impact CRM supply chains: (1) a knowledge-driven fuzzy logic model that yields an area under the curve (AUC) for the receiver operating characteristics plot of 0.72 for the entire model; (2) a naïve Bayes model that yields an AUC of 0.81 for the test set; and (3) a deep learning model comprising stacked autoencoders and a feed-forward artificial neural network that yields an AUC of 0.91 for the test set. The high AUC of the deep learning model demonstrates that public geospatial data can accurately predict natural resources conflicts, but we show that machine learning results are biased by proxies for population density and likely underestimate the potential for conflict in remote areas. Knowledge-driven methods are the least impacted by population bias and are used to calculate an ESG rating that is then applied to a global dataset of lithium occurrences as a case study. We demonstrate that giant lithium brine deposits (i.e., >10&nbsp;Mt Li2O) are restricted to regions with higher spatially situated risks relative to a subset of smaller pegmatite-hosted deposits that yield higher ESG ratings (i.e., lower risk). Our results reveal trade-offs between the sources of lithium, resource size, and spatially situated risks. We suggest that this type of geospatial ESG rating is broadly applicable to other CRM and that mapping spatially situated risks prior to mineral exploration has the potential to improve ESG outcomes and government policies that strengthen supply chains. <b>Citation:</b> Haynes M, Chudasama B, Goodenough K, Eerola T, Golev A, Zhang SE, Park J and Lèbre E (2024) Geospatial Data and Deep Learning Expose ESG Risks to Critical Raw Materials Supply: The Case of Lithium. <i>Earth Sci. Syst. Soc. </i>4:10109. doi: 10.3389/esss.2024.10109

<div>Tin and tungsten have good potentials for increased demand applications particularly in the electrical and energy storage areas. Similar to other critical metals like Li and Co, Sn and W are essential ingredients for many applications and technologies that are important for a sustainable future. </div><div>&nbsp;</div><div>Granite related hydrothermal mineral systems are the predominant source for Sn and W deposits.Cassiterite, wolframite and scheelite are primary Sn and W ore minerals in nature. The distribution of Sn rich areas around the world is uneven, which may reflects that geochemical heritage is fundamental to form Sn and W deposits. Besides, magmatic differentiation has been considered as another efficient way to enrich Sn in various geological reservoirs. The tectonic setting of Sn and W mineralisation is well understood, with most Sn and W deposits having formed at active margin settings. A comparison between the Tethyan and Andean Sn-W mineral systems confirmed that Sn and W mineral systems can form under thickened continental crust associated with an oceanic crust subduction. The importance of granitoids for the formation of Sn and W mineral systems is well understood. The genetic affinity of causative intrusions can be either S-type, I-type or A-type, but a common feature is that they are reduced (or ilmenite series) and highly evolved (high SiO2 content and high Rb/Sr ratio). Another prominent feature for Sn and W mineral systems is their high concentration of critical metals, including Li, Ce, Ta and In etc. Therefore, Sn and W mineralisation has a close association with other critical metal mineralisation. Overall, the precipitation mechanisms of W (wolframite and scheelite) and Sn (cassiterite) ore minerals from the hydrothermal fluid include (1) fluids mixing, (2) boiling and, (3) water-rock interaction.&nbsp;</div><div><br></div><div>Recent studies have highlighted discrepancies in Sn mineralisation and W mineralisation conditions. Although Sn- and W-associated granites have substantial overlapping characteristics, many of their physico-chemical natures (e.g., aluminum-saturation index (ASI) values, zirconium saturation temperatures and crystal fractionation degrees) are distinctive, suggesting Sn- and W-granites may form under different geological conditions. The difference between Sn mineralisation and W mineralisation is also evident by their contrasting fluid-melt partitioning coefficients. Tungsten strongly partitions into the aqueous fluid and can be transported farther away from the intrusion, but Sn slightly partitions into the silicate melt and can precipitate as magmatic cassiterite or be incorporated into crystallizing micas (which can have >100 ppm Sn). Another area warranting more study is understanding the elemental associations observed in Sn and W mineral systems. It is common to have many other metals in Sn-dominant mineral systems, for example W, Li, Nb, Ta. For W-dominant mineral systems, apart from with Sn, other common associated metals include Mo, Au-Bi and Cu. Nevertheless, the relationship between Sn-W and Cu-Au mineral systems at both the regional/provincial-scale and deposit-scale is an intriguing puzzle, because Sn-W and Cu-Au deposits are generally formed under different geological conditions, though their tectonic setting are similar, i.e., arc-related subduction and continental collision. An emerging field for understanding Sn and W mineral systems is made possible with the development of micro-analytical techniques, e.g., in-situ U-Pb geochronology and O-isotopic analyses on cassiterite and wolframite enable a greater understanding of Sn and W mineralising systems. Since both are the primary ore minerals, U-Pb dating on them can deliver direct age information - an advantage compared with many other commodities types like Cu, Au and Ag. However, unlike those commodities, impactful advances on Sn and W exploration models, techniques, and tools have been deficient in recent years; therefore, more attention and effort is needed to boost Sn and W mineral exploration in the future.</div><div><br></div>This paper was presented to the 2022 Asian Current Research on Fluid Inclusions IX (ACROFI IX) Conference 12-13 December (http://www.csmpg.org.cn/tzgg2017/202210/t20221011_6522628.html)

<div>Geoscience Australia’s Exploring for the Future (EFTF) program is a multi-year Australian Government initiative, led by Geoscience Australia in partnership with State and Territory governments. The EFTF program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources. By gathering, analysing and interpreting new and existing precompetitive geoscience data and information, we are building a national picture of Australia’s geology and resource potential. This leads to a strong economy, resilient society and sustainable environment for the benefit of all Australians. This includes supporting Australia’s transition to a low emissions economy, strong resources and agriculture sectors, and economic opportunities and social benefits for Australia’s regional and remote communities. The EFTF program, which commenced in 2016, is an eight year, $225 million investment by the Australian Government.</div><div><br></div><div>This report presents the results of Grains with Oil Inclusions (GOI™) and Frequency of Oil Inclusions (FOI™) on rock samples from three selected drill holes across the Birrindudu Basin. Forty-five samples were obtained from drill holes WLMB001B, ANT003 and 99VRNTGSDD1. GOI™ and FOI™ was conducted on sedimentary and carbonate vein lithologies to investigate the potential presence of oil inclusions. Oil inclusions were recorded in samples taken from drill holes WLMB001B and ANT003, but not 99VRNTGSDD1. Analysis was undertaken by CSIRO under contract to Geoscience Australia.</div>

<div>Geoscience Australia’s Exploring for the Future program provides precompetitive information to inform decision-making by government, community and industry on the sustainable development of Australia's mineral, energy and groundwater resources.&nbsp;&nbsp;Exploring for the Future program, which commenced in 2016, is an eight year, $225m investment by the Australian Government.</div><div><br></div><div>The Proterozoic Birrindudu Basin is an underexplored region that contains sparse geological data. Strata of similar age are highly prospective to the east, in the McArthur and South Nicholson basins and the Mount Isa region. To investigate this underexplored and data-poor region, the L214 Northwest Northern Territory Seismic Survey was acquired in August to September 2023 by GA and co-funded by the Northern Territory Government. Prior to this survey the region contained minimal seismic data. To complement the acquisition of the seismic survey, a sampling program of legacy stratigraphic and mineral exploration drill holes was also undertaken.</div><div><br></div><div>The new sampling program and seismic reflection data acquired over the Birrindudu Basin and its flanks, has identified many areas of exploration opportunity. This has almost tripled seismic coverage over the Birrindudu Basin, which has enabled new perspectives to be gained on its geology and relationship to surrounding regions. The new seismic has shown an increase in the extent of the Birrindudu Basin, revealing the presence of extensive concealed Birrindudu Basin sedimentary sequences and major, well preserved depocentres. In the central Birrindudu Basin and Tanami Region, shallow basement and deep-seated faults are encouraging for mineralisation, as these structures have the potential to focus mineralised fluids to the near surface. The clear presence of shallow Tanami Region rocks underlying the southern Birrindudu Basin sequences at the northern end of line 23GA-NT2 extends the mineral resource potential of the Tanami Region further north into the southern Birrindudu Basin. A new minimum age of 1822±7 Ma for the deposition of metasediments in drill hole LBD2 for rocks underlying the central Birrindudu Basin, extends the age-equivalent mineral-rich basement rocks of the Tanami Region north into the central Birrindudu Basin – extending the mineral resource potential into a new region.</div><div><br></div><div>The continuous stratigraphy imaged of the Birrindudu Basin by the new seismic is encouraging for energy prospectivity, as the system elements needed for an effective petroleum system, better defined by the new sampling program results, have been imaged to extend over a wider and deeper area. New organic petrological analysis and reflectance data indicate the sampled sections have reached thermal maturity suitable for hydrocarbon generation. Oil inclusion analyses provide evidence for oil generation and migration, and hence elements of a petroleum system are present in the central and northwestern Birrindudu Basin. With the expanded breadth of these rocks demonstrated on the seismic, this greatly increases the spatial extent of hydrocarbon prospectivity in Birrindudu Basin.</div>

<div><strong>Conclusions</strong>&nbsp;</div><div><br></div><div>The NW NT Seismic Survey (L214) was designed to image the underexplored Proterozoic Birrindudu Basin and adjacent regions, including the highly prospective Tanami region. In an area of very limited seismic coverage, the acquisition of ~900km of deep crustal seismic data has vastly improved the seismic coverage through this region. &nbsp;The new dataset will be available as both raw and processed data files from the Geoscience Australia website in the future.</div><div><br></div>Abstract presented at the 2024 Annual Geoscience Exploration Seminar (AGES)

<div>The Canning Basin is a prospective hydrocarbon frontier basin and is unusual for having limited offshore seismic and well data in comparison with its onshore extent. In this study, seismic mapping was conducted to better resolve the continuity of 13 key stratigraphic units from onshore to offshore to delineate prospective offshore hydrocarbon-bearing units, and better understand the distribution of mafic igneous units that can compartmentalise migration pathways and influence heat flow. The offshore Canning Basin strata are poorly constrained in six wells with limited seismic coverage; hence data availability was bolstered by integrating data from the onshore portion of the basin and adjacent basins into a single 3D seismic stratigraphic model. This model integrates over 10 000 km of historical 2D seismic data and 23 exploration wells to allow mapping of key stratal surfaces. Mapped seismic horizons were used to construct isochores and regional cross-sections. Seven of the 13 units were mapped offshore for the first time, revealing that the onshore and offshore stratigraphy are similar, albeit with some minor differences, and mafic igneous units are more interconnected than previously documented whereby they may constitute a mafic magmatic province. These basin-scale maps provide a framework for future research and resource exploration in the Canning Basin. To better understand the basin’s geological evolution, tectonic history and petroleum prospectivity, additional well data are needed in the offshore Canning Basin where Ordovician strata have yet to be sampled.</div><div><br></div><div>C. T. G. Yule, J. Daniell, D. S. Edwards, N. Rollet & E. M. Roberts&nbsp;(2023).&nbsp;Reconciling the onshore/offshore stratigraphy of the Canning Basin and implications for petroleum prospectivity,&nbsp;Australian Journal of Earth Sciences,&nbsp;DOI:&nbsp;10.1080/08120099.2023.2194945</div> Appeared in Australian Journal of Earth Sciences Pages 691-715, Volume 70, 2023 - Issue 5.