PHYSICAL GEOGRAPHY AND ENVIRONMENTAL GEOSCIENCE
Type of resources
Keywords
Publication year
Topics
-
This Amadeus Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Amadeus Basin is a sedimentary basin in central Australia that spans from the Neoproterozoic to Late Devonian, potentially Early Carboniferous, periods. It contains clastic, carbonate, and evaporitic sedimentary rocks, with a total thickness of 6,000 m to 14,000 m. The Neoproterozoic section alone is up to 3,000 m thick and is divided into four super-sequences separated by major unconformities. The basin is an active hydrocarbon province, with ongoing oil and gas production and the potential for further discoveries. Several key petroleum source rock units have been identified in the Amadeus Basin. The Gillen Formation, found in the northeast, consists of marine black shale, dolostone, sandstone, and evaporite, reaching a maximum thickness of 850 m. The Loves Creek Formation comprises deep water grainstone and mudstone overlain by stromatolite-bearing grainstone and dolostone, with a thickness of up to 500 m. The Johnnys Creek Formation is a unit composed of red bed and dolomitic limestone or dolostone, along with siltstone and sandstone, up to 400 m thick. The Inindia beds consist of sandstone, siltstone, chert, jasper, tillite, and dolostone, with a maximum thickness of 2,000 m and were deposited in shallow marine conditions. The Aralka Formation is a siltstone and shale unit with two members, the Ringwood Member and the Limbla Member, reaching a thickness of up to 1,000 m. The Pertatataka Formation is a turbiditic red and green siltstone and shale unit, along with minor feldspathic sandstone, deposited in a deep marine or marine shelf environment, typically about 350 m thick but up to 1,400 m thick at certain locations. The Winnall Group is a succession of sandstone and siltstone, with a maximum thickness of 2,134 m. The Chandler Formation is a poorly exposed unit consisting of halite, foetid carbonate mudstone, shale, and siltstone, deposited in a shallow marine environment, with halite deposits reaching thicknesses of 230 m to 450 m. The Giles Creek Dolostone is a carbonate and siltstone unit, with minor sandstone, deposited in a shallow-marine environment. The Horn Valley Siltstone is a thinly bedded shale and siltstone, with nodular limestone and sandy phosphatic and glauconitic interbeds, serving as the primary hydrocarbon source rock in the basin. Lastly, the Stairway Sandstone is 544 m thick and divided into three subunits, consisting of quartzitic sandstone, black shale, siltstone, mudstone, and phosphorites.
-
This Darling Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The geological Darling Basin, covering approximately 130,000 square kilometres in western New South Wales (with parts in South Australia and Victoria), is filled with over 8,000 m of mainly Devonian sedimentary rocks formed in various environments, from alluvial to marine. It sits atop regional basement structures, coinciding with boundaries between Late Paleozoic Kanmantoo, Lachlan, and Southern Thomson Fold Belts. The basin's outcrops are scarce, obscured by younger rocks and sediments. Sedimentary rocks from Late Silurian to Early Carboniferous periods make up the basin, with marine shales and fluvial quartz-rich sandstones being the most common. The Menindee and Bancannia Troughs rest unconformably over Proterozoic and Lower Paleozoic basement rocks, while eastern sub-basins onlap deformed and metamorphosed Lower Paleozoic rocks. A major tectonic shift at the end of the Ordovician transformed south-eastern Australia's palaeogeography from a marginal marine sea to deep troughs and basins. The Darling Basin's discrete sedimentary troughs formed in areas of maximum tectonic extension, including the Ivanhoe, Blantyre, Pondie Range, Nelyambo, Neckarboo, Bancannia, Menindee troughs, and Poopelloe Lake complex. Spatial variation in sedimentary facies indicates potential interconnections between the troughs. The western basin overlies Proterozoic and Lower Paleozoic rocks of the Paroo and Wonominta basement blocks, while the eastern basin onlaps folded, faulted, and metamorphosed older Paleozoic rocks of the Lachlan Fold Belt. The Darling Basin has seen limited hydrocarbon exploration, with wells mostly situated on poorly-defined structures. Indications of petroleum presence include gas seeping from water bores, potential source rocks in sparsely sampled Early Devonian units, and occasional hydrocarbon shows in wells. Reservoir units boast good porosity and permeability, while Cambrian to Ordovician carbonates and shales beneath the basin are considered potential source rocks.
-
This Carnarvon Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Carnarvon Basin is a large sedimentary basin covering the western and north-western coast of Western Australia, stretching over 1,000 km from Geraldton to Karratha. It is predominantly offshore, with over 80% of the basin located in water depths of up to 4,500 m. The basin is elongated north to south and connects to the Perth Basin in the south and the offshore Canning Basin in the north-east. It is underlain by Precambrian crystalline basement rocks. The Carnarvon Basin consists of two distinct parts. The southern portion comprises onshore sub-basins with mainly Paleozoic sedimentary rocks extending up to 300 km inland, while the northern section consists of offshore sub-basins containing Mesozoic, Cenozoic, and Paleozoic sequences. The geological evolution of the Southern Carnarvon Basin was shaped by multiple extensional episodes related to the breakup of Gondwana and reactivation of Archean and Proterozoic structures. The collision between Australia and Eurasia in the Mid-Miocene caused significant fault reactivation and inversion. The onshore region experienced arid conditions, leading to the formation of calcrete, followed by alluvial and eolian deposition and continued calcareous deposition offshore. The Northern Carnarvon Basin contains up to 15,000 m of sedimentary infill, primarily composed of siliciclastic deltaic to marine sediments from the Triassic to Early Cretaceous and shelf carbonates from the Mid-Cretaceous to Cenozoic. The basin is a significant hydrocarbon province, with most of the resources found within Upper Triassic, Jurassic, and Lower Cretaceous sandstone reservoirs. The basin's development occurred during four successive periods of extension and thermal subsidence, resulting in the formation of various sub-basins and structural highs. Overall, the Carnarvon Basin is a geologically complex region with a rich sedimentary history and significant hydrocarbon resources. Exploration drilling has been ongoing since 1953, with numerous wells drilled to unlock its hydrocarbon potential.
-
This Northern Australian Fractured Rock Province dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Northern Australian Fractured Rock Province is a hydrogeological entity defined for this study, building upon earlier national-scale hydrogeological research. Australia's geological development was predominantly from west to east, with Archean rocks in the west, Proterozoic rocks in central Australia, and Phanerozoic rocks in the east. The North Australian Craton (NAC) is a significant tectonic element underlying 80% of the Northern Territory and extending to parts of Western Australia and northern Queensland, making up the core of the Northern Australian Fractured Rock Province. The NAC primarily consists of Paleoproterozoic rocks overlying Neoarchean basement. It is surrounded by Proterozoic terranes, including the Musgrave, Warumpi, and Paterson orogens to the south and south-west, the Terra Australis Orogen in the east, and the Western Australian Craton in the west. The Northern Australian Fractured Rock Province includes approximately twelve geological regions of mostly Proterozoic age, such as the Kimberley Basin, Speewah Basin, and Tanami Orogen, among others. Additionally, the province is partially overlain by the Kalkarindji Province, characterized by volcanic rocks. This widespread basaltic province serves as the basement for several significant sedimentary basins in northern Australia, including the Wiso, Ord, Bonaparte, Daly, and Georgina basins. In summary, the Northern Australian Fractured Rock Province is a hydrogeological region defined by combining various Proterozoic geological regions, mainly situated within the North Australian Craton. It is bounded by other Proterozoic terranes and covered in part by the Kalkarindji Province, which consists of volcanic rocks and forms the basement for several key sedimentary basins in northern Australia. Understanding this province is crucial for evaluating the hydrogeological characteristics and geological history of the region.
-
This Karumba Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Karumba Basin is a shallow geological basin in Queensland, Australia, composed of sedimentary rocks and unconsolidated sediments that cover the Mesozoic Carpentaria Basin. Deposition started during the Late Cretaceous to Early Paleocene and has continued into the Holocene. The basin extends from western Cape York Peninsula into the Gulf of Carpentaria, where it connects with Cenozoic sediment deposits in Papua New Guinea. Although the sediments in both areas share lithostratigraphic and biostratigraphic similarities, their tectonic histories differ. The basin's structural geology is relatively uniform, with a significant downwarp known as the Gilbert-Mitchell Trough in Cape York Peninsula and another depocenter offshore in the Gulf of Carpentaria. The depositional history and stratigraphy of the Karumba Basin can be divided into three cycles of deposition, erosion, weathering, and the formation of stratigraphic units. The earliest cycle (the Bulimba Cycle) began in the Late Cretaceous to Early Paleocene, with episodes of significant uplift along the eastern margins of the basin. This resulted in the deposition of the Bulimba Formation and the Weipa Beds, primarily consisting of claystone, sandstone, conglomerate, and siltstone with minor coal layers. This cycle was followed by a period of planation and deep weathering, creating the Aurukun Surface. The second cycle (the Wyaaba Cycle) was initiated by large-scale earth movements along the Great Dividing Ranges, forming much of the eastern boundary of the Karumba Basin, and leading to the formation of the Wyaaba beds and other equivalent units. These beds consist mainly of fluvial to paralic clay-rich sandstone, conglomerate, siltstone, and claystone. In the south-west, Oligocene to Pliocene limestone deposits also formed in lacustrine settings, and were sourced from and deposited upon the underlying Georgina Basin. The cycle ended with ensuing periods of erosion and weathering and the development of the Pliocene Kendall Surface, as well as widespread basaltic volcanism. The final cycle (the Claraville Cycle) started in the Pliocene and continues to the present. It has experienced several episodes of uplift and deposition controlled by sea level change, climate variability and volcanism in the south. The Claraville beds are unconsolidated sediments, chiefly comprised of clayey quartzose sand and mud with minor gravels, reaching approximately 148 m thickness offshore, and approximately 70 m onshore. As this cycle is still ongoing, no terminal surface has been formed, and most units consist of unconsolidated surficial sediments.
-
<div>This document steps educators and students through some of the uses of the satellite data on the Digital Earth Australia (DEA) Portal, with a particular focus on changes to landscapes and coasts over time. Instructions and questions are provided so educators and students can explore the data sets as they work their way through the document. The document also gives a brief background on how satellites operate and how they capture imagery.</div><div><br></div>
-
This Murray Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Murray Basin, a significant sedimentary basin in Australia, displays varying sediment thickness across its expanse, with the thickest layers concentrated in its central regions. The basin's geological evolution is characterised by distinct depositional phases. During the Paleocene to Eocene Renmark Group phase, sedimentary deposits encompass fluvial sands at the base, transitioning into paralic carbonaceous clay and lignite layers. These sediments indicate the shift from riverine to shallow marine environments, dating back to the Paleocene and Eocene periods. The Oligocene to Middle Miocene period encompasses the Ettrick Formation and Murray Group Limestone. The former includes marl, and the latter displays glauconitic grey-green marl and bryozoal limestone, revealing prevailing marine conditions during the Oligocene to Middle Miocene. In the Late Miocene to Early Pliocene Bookpurnong Formation, marine shelly dark grey clay and silt, previously known as the Bookpurnong Beds, coexist with Pliocene fluvial to marginal marine quartz sands (Loxton Sands), marking the transition back to terrestrial and nearshore marine settings. During the Late Pliocene to Pleistocene, the Blanchetown Clay, a substantial unit within Lake Bungunnia, signifies lacustrine phases. Overlying ferricretes in the central/eastern basin and the Norwest Bend Formation's oyster coquinas in the western region, the clay exhibits variable coloration and laminations. Lastly, the Pleistocene to Holocene phase witnesses river-induced reworking and erosion of underlying sediments, giving rise to the Shepparton and Coonambidgal formations. In the western Murray Basin, Cenozoic sedimentary rocks are relatively thin, typically measuring under 200-300 meters. The Renmark Trough area presents a maximum thickness of 600 meters.
-
This Wiso Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Wiso Basin, a large intra-cratonic basin in the central Northern Territory, covers about 140,000 square kilometres and is part of the Centralian Superbasin. It is bounded by the Tennant and Tanami regions to the east and west, while a thrust fault separates it from the Arunta Region to the south. The basin adjoins the Georgina Basin in the southeast and joins the Daly and Georgina basins beneath the Cretaceous strata of the Carpentaria Basin in the north. The basin contains a relatively flat, undeformed succession of strata that gently dip towards the main depo-centre, the Lander Trough. About 80% of the basin consists of shallow middle Cambrian strata, while the remaining portion is within the Lander Trough, containing a diverse succession of Cambrian, Ordovician, and Devonian units. The depositional history and stratigraphy reveal that early Cambrian saw widespread basaltic volcanism, with the Antrim Plateau Volcanics forming the base layer and aquitard of the Wiso Basin. The middle Cambrian deposits include the Montejinni Limestone, the oldest sedimentary unit, followed by the Hooker Creek Formation and the Lothari Hills Sandstone. The uppermost Cambrian unit is the Point Wakefield beds. The Ordovician deposits consist of the Hansen River beds, primarily composed of fossiliferous sandstone and siltstone deposited in shallow marine environments. The Devonian unit capping the basin is the Lake Surprise Sandstone, found in the Lander Trough area, formed in shallow marine, shoreline, and fluvial environments during the Alice Springs Orogeny. Three main hypotheses have been proposed for the formation of the Lander Trough: a large crustal downwarp before thrusting of Paleoproterozoic rocks, the formation of a half-graben by faulting along the southern boundary, or the formation of two en-echelon synclines by vertical block movement. While the majority of the Wiso Basin consists of shallow middle Cambrian rocks, the Lander Trough presents a more varied stratigraphic sequence, holding potential for Neoproterozoic and early Cambrian rocks. However, further drilling is needed to verify this. The presence of similar units in neighbouring basins provides valuable insight into the basin's geological history and development.
-
This Carpentaria Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Carpentaria Basin is a vast intra-cratonic sedimentary basin situated on and offshore in north-eastern Australia, covering around 550,000 square kilometres across Queensland and the Northern Territory. It comprises predominantly sandstone-rich rock units deposited during sea level highs from the Late Jurassic to Mid Cretaceous. The basin overlies a heterogeneous Proterozoic basement and is separated from contemporaneous sedimentary structures by basement highs and inliers. Four main depocentres within the larger Carpentaria Basin form four major sub-basins: the Western Gulf Sub-basin, Staaten Sub-basin, Weipa Sub-basin, and Boomara Sub-basin. While the basin is extensive and continuous in Queensland, it becomes more heterogeneous and discontinuous in the Northern Territory. Remnants of the basin's stratigraphy, referred to as the Dunmarra Basin, are found along the Northern Territory coast and inland. The depositional history commenced during the Jurassic with down warping near Cape York Peninsula, resulting in the Helby beds and Albany Pass beds' concurrent deposition. The basin experienced marine transgressions during the Cretaceous, with the Gilbert River Formation widespread and the Wallumbilla Formation occurring during sea level highs. The Carpentaria Basin's strata are relatively undeformed and unmetamorphosed. The Northern Territory sequence displays slightly different stratigraphy, limited to the height of the Aptian marine transgression above the Georgina Basin. The Walker River Formation and Yirrkala Formation represent key units in this area, outcropping as tablelands and mesas largely unaffected by tectonism.
-
The poster uses a colourful digital elevation model to show the topography of the Australian continent. Low land is shown in green, higher land is yellow and orange and the highest parts of the country appear red. The map also shows perennial and non-perennial lakes and rivers as well as the location of the highest point in Australia and Kati Thanda-Lake Eyre at below sea level. The surrounding 200 m and 1000 m seabed depths contours are shown against a grey background. An accompanying text box outlines the three main physical regions of the county: the western plateau, central lowlands and eastern highlands. The poster is designed to be printed at A1 size which is 1:7 000 000 scale.