From 1 - 10 / 47
  • <div>Geoscience Australia's Exploring for the Future Program (EFTF) is supporting regional and national-scale initiatives to address Australia’s hydrogeological challenges using an integrated geoscience systems approach. An important early step in the EFTF groundwater program focused on developing a national hydrogeological inventory of Australia’s major groundwater basins and fractured rock provinces. The inventory has its roots in the seminal 1987 Hydrogeology of Australia map, the first continental-scale map of groundwater systems and principal aquifers (Jacobson and Lau, 1987). Seeking to enhance and modernise the supporting information base for the national map, the inventory combines a curated selection of geospatial data attributes supported by focused narrative on the geology and hydrogeology of each basin and fractured rock province.</div><div>&nbsp;</div><div>The national hydrogeological inventory has a broad range of benefits for Australian groundwater users, managers and policy makers. These include the provision of an updated knowledge base covering the hydrogeology and groundwater systems of the major hydrogeological provinces of the nation, as well as important contextual information. The extensive catalogue of knowledge contained in the inventory also enables an objective approach to identify and prioritise areas for further regional assessment.</div><div>&nbsp;</div><div>Based on analysis of data compiled for the national inventory, the Lake Eyre Basin in arid central Australia was the first region prioritised for more detailed hydrogeological assessment during EFTF. The integration of a variety of basin- to national-scale geoscience datasets enabled significant advances in geological and hydrogeological understanding and the development of a new geological model for the three main basin depo-centres, namely the Tirari and Callabonna Sub-basins, and the Cooper Creek Palaeovalley. The geological modelling has further supported a range of hydrogeological applications, including substantial improvements in the number of bores with aquifer attribution, as well as the first regional watertable map across the basin. Abstract submitted and presented at the 2023 AGC NZHS Joint Conference Auckland, NZ (https://www.agcnzhs2023conference.co.nz/)

  • This Eucla Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Eucla Basin, located along Australia's southern margin, covers an extensive area of approximately 1,150,000 square kilometres, housing the world's largest grouping of onshore Cenozoic marine sediments. It stretches over 2000 km from east to west and has four main subdivisions: Scaddan Embayment, Esperance Shelf, Nullarbor Shelf, and Yalata Sub-basin offshore. The basin extends about 350 km inland from the modern southern Australian coastline and terminates around 200 km offshore where it meets sediments of the Australian-Antarctic Basin. The sedimentary succession is largely consistent throughout the entire basin. In the west, it overlaps with the Yilgarn Craton and Albany-Fraser Orogen, while in the east, the Gawler Craton and Officer Basin separate it from the Musgrave Province. The basin contains mainly Cenozoic sediments, with thicker sequences in the east due to sediment movement and regional elevation differences. The onshore Eucla Basin hosts an unfaulted sheet of sediment deposited over a south-sloping shelf during several marine transgressions. The basal units rest on a prominent unconformity above the Bight Basin, indicating a break in deposition during the separation of Australia and Antarctica. The sedimentary sequence comprises various units such as the Hampton Sandstone, Pidinga Formation, and Werillup Formation, followed by the Wilson Bluff Limestone, Abrakurrie Limestone, Nullarbor Limestone, and Roe Calcarenite. The basin's geological history is marked by significant events such as marine transgressions during the Eocene, leading to the deposition of extensive limestone formations. The Miocene saw slight tilting of the basin, exposing the Nullarbor Plain to the atmosphere and limiting further sediment deposition. During the late Miocene to Pliocene, barrier and lagoonal transgressions contributed to the formation of the Roe Calcarenite. The Pliocene period witnessed intense karstification and the development of ferricrete and silcrete, resulting in the unique modern-day topography of the region.

  • This Arafura Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Arafura Basin is a large intracratonic sedimentary basin along the northern continental margin of Australia. Over 90% of the basin occurs offshore in relatively shallow marine waters of the Arafura Sea, with the basin extending northwards beyond Australia's territorial claim. The southern part of the basin is onshore in northern Arnhem Land. Older Paleo- to Mesoproterozoic rocks of the northern Macarthur Basin underlie most of the onshore basin, whereas Mesozoic and Cenozoic sediments of the Money Shoal Basin unconformably overlie the offshore basin. The sedimentary record of the Arafura Basin spans greater than 250 million years, from the late Neoproterozoic to the early Permian. However, subsidence was episodic and restricted to four main phases of regional subsidence interspersed with relatively long periods of tectonic quiescence. Consequently, the entire sedimentary succession of the basin is relatively structurally conformable. The oldest rocks are the Neoproterozoic to Cambrian Wessel Group. These are overlain by the Middle Cambrian to early Ordovician Goulburn Group, followed by the Late Devonian Arafura Group. The uppermost sequence is Late Carboniferous to early Permian (an equivalent of the Kulshill Group from the neighbouring Bonaparte Basin). The sedimentary rocks of the Arafura Basin are clastic-dominated and include sandstone, shale, limestone, dolostone and minor coal and glacial deposits. Most of the Arafura Basin formed within shallow marine environments, with evidence for fluvial conditions largely restricted to the Carboniferous to Permian rocks. There are no detailed basin-scale studies on the hydrogeology and groundwater systems of the Arafura Basin. Previous hydrogeological investigations by the Northern Territory Government during the 1980s and 1990s focused on groundwater supplies for remote communities such as Maningrida, Galiwinku and Millingimbi. Groundwater for these communities is sourced from fractured rock sandstone aquifers, most likely units of the Arafura Basin such as the Marchinbar Sandstone and Elcho Island Formation of the Wessel Group. The aquifers are fractured and extensively weathered up to 100 metres below surface.

  • This Otway Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Otway Basin is an elongated sedimentary basin located on the south-east continental margin of Australia. Covering approximately 150,000 square kilometres and stretching about 500 km from South Australia's Cape Jaffa to Victoria's Port Phillip Bay and Tasmania's north-west, most of the basin is offshore, with a smaller portion onshore. Geological studies of the Otway Basin have primarily focused on its hydrocarbon prospectivity, examining thick Cretaceous aged rocks both onshore and offshore. However, the shallower onshore sedimentary units are more relevant from a groundwater perspective. The basin's formation began with rifting between the Australian and Antarctic plates during the Late Jurassic, leading to regional subsidence and the development of the elongated sedimentary basin. Following the Cretaceous plate breakup, a passive margin basin formed, which subsequently underwent basin inversion, reverse faulting, and folding, interspersed with extensional periods and normal faulting. This complex evolution, combined with sea level variations and volcanic activity, resulted in numerous sedimentary cycles. The sedimentary succession in the basin comprises non-marine sediments and volcanic rocks from the Jurassic and early Cretaceous, with a period of tectonic compression interrupting sedimentation during the mid-Cretaceous. The late Cretaceous and Cenozoic sedimentary and volcanic rocks form the primary groundwater-bearing aquifers of the basin, with various sedimentary environments developing in the Neogene and Quaternary. The basin's structural geology is intricate, with numerous basement highs, sub-basins, troughs, and embayments. Fault systems are prevalent, separating tectonic blocks and potentially influencing groundwater flow, offering conduits for inter-aquifer connectivity. Overall, the Otway Basin's geological history has shaped its hydrocarbon potential and groundwater resources, making it an essential area for ongoing research and exploration in Australia's geological landscape.

  • This Carpentaria Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Carpentaria Basin is a vast intra-cratonic sedimentary basin situated on and offshore in north-eastern Australia, covering around 550,000 square kilometres across Queensland and the Northern Territory. It comprises predominantly sandstone-rich rock units deposited during sea level highs from the Late Jurassic to Mid Cretaceous. The basin overlies a heterogeneous Proterozoic basement and is separated from contemporaneous sedimentary structures by basement highs and inliers. Four main depocentres within the larger Carpentaria Basin form four major sub-basins: the Western Gulf Sub-basin, Staaten Sub-basin, Weipa Sub-basin, and Boomara Sub-basin. While the basin is extensive and continuous in Queensland, it becomes more heterogeneous and discontinuous in the Northern Territory. Remnants of the basin's stratigraphy, referred to as the Dunmarra Basin, are found along the Northern Territory coast and inland. The depositional history commenced during the Jurassic with down warping near Cape York Peninsula, resulting in the Helby beds and Albany Pass beds' concurrent deposition. The basin experienced marine transgressions during the Cretaceous, with the Gilbert River Formation widespread and the Wallumbilla Formation occurring during sea level highs. The Carpentaria Basin's strata are relatively undeformed and unmetamorphosed. The Northern Territory sequence displays slightly different stratigraphy, limited to the height of the Aptian marine transgression above the Georgina Basin. The Walker River Formation and Yirrkala Formation represent key units in this area, outcropping as tablelands and mesas largely unaffected by tectonism.

  • This Sydney Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Sydney Basin, part of the Sydney–Gunnedah–Bowen basin system, consists of rocks dating from the Late Carboniferous to Middle Triassic periods. The basin's formation began with extensional rifting during the Late Carboniferous and Early Permian, leading to the creation of north-oriented half-grabens along Australia's eastern coast. A period of thermal relaxation in the mid Permian caused subsidence in the Bowen–Gunnedah–Sydney basin system, followed by thrusting of the New England Orogen from the Late Permian through the Triassic, forming a foreland basin. Deposition in the basin occurred in shallow marine, alluvial, and deltaic environments, resulting in a stratigraphic succession with syn-depositional folds and faults, mostly trending north to north-east. The Lapstone Monocline and Kurrajong Fault separate the Blue Mountains in the west from the Cumberland Plain in the central part of the basin. The Sydney Basin contains widespread coal deposits classified into geographic coalfield areas, including the Southern, Central, Western, Newcastle, and Hunter coalfields. These coalfields are primarily hosted within late Permian strata consisting of interbedded sandstone, coal, siltstone, and claystone units. The coal-bearing formations are grouped based on sub-basins, namely the Illawarra, Tomago, Newcastle, and Wittingham coal measures, underlain by volcanic and marine sedimentary rocks. Deposition within the basin ceased during the Triassic, and post-depositional igneous intrusions (commonly of Jurassic age) formed sills and laccoliths in various parts of the basin. The maximum burial depths for the basin's strata occurred during the early Cretaceous, reaching around 2,000 to 3,000 metres. Subsequent tectonic activity associated with the Tasman Rift extension in the Late Cretaceous and compressional events associated with the convergence between Australia and Indonesia in the Neogene led to uplift and erosion across the basin. These processes have allowed modern depositional environments to create small overlying sedimentary basins within major river valleys and estuaries, along the coast and offshore, and in several topographic depressions such as the Penrith, Fairfield and Botany basins in the area of the Cumberland Plain.

  • This Wiso Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Wiso Basin, a large intra-cratonic basin in the central Northern Territory, covers about 140,000 square kilometres and is part of the Centralian Superbasin. It is bounded by the Tennant and Tanami regions to the east and west, while a thrust fault separates it from the Arunta Region to the south. The basin adjoins the Georgina Basin in the southeast and joins the Daly and Georgina basins beneath the Cretaceous strata of the Carpentaria Basin in the north. The basin contains a relatively flat, undeformed succession of strata that gently dip towards the main depo-centre, the Lander Trough. About 80% of the basin consists of shallow middle Cambrian strata, while the remaining portion is within the Lander Trough, containing a diverse succession of Cambrian, Ordovician, and Devonian units. The depositional history and stratigraphy reveal that early Cambrian saw widespread basaltic volcanism, with the Antrim Plateau Volcanics forming the base layer and aquitard of the Wiso Basin. The middle Cambrian deposits include the Montejinni Limestone, the oldest sedimentary unit, followed by the Hooker Creek Formation and the Lothari Hills Sandstone. The uppermost Cambrian unit is the Point Wakefield beds. The Ordovician deposits consist of the Hansen River beds, primarily composed of fossiliferous sandstone and siltstone deposited in shallow marine environments. The Devonian unit capping the basin is the Lake Surprise Sandstone, found in the Lander Trough area, formed in shallow marine, shoreline, and fluvial environments during the Alice Springs Orogeny. Three main hypotheses have been proposed for the formation of the Lander Trough: a large crustal downwarp before thrusting of Paleoproterozoic rocks, the formation of a half-graben by faulting along the southern boundary, or the formation of two en-echelon synclines by vertical block movement. While the majority of the Wiso Basin consists of shallow middle Cambrian rocks, the Lander Trough presents a more varied stratigraphic sequence, holding potential for Neoproterozoic and early Cambrian rocks. However, further drilling is needed to verify this. The presence of similar units in neighbouring basins provides valuable insight into the basin's geological history and development.

  • <div>This presentation is about the National Hydrogeological Inventory, developed as part of Geoscience Australia's national-scale groundwater research efforts in the Exploring for the Future (EFTF) program. The presentation is part of the 2024 Distinguished Geoscience Australia Lecture (DGAL) series.</div><div><br></div><div>One of Geoscience Australia's strategic drivers is to Improve understanding of Australia's groundwater systems to support sustainable management and help to secure our water resources to optimise and sustain their use. Aligned with this key objective, and as part of the EFTF program, Geoscience Australia developed and delivered the first comprehensive update to the Hydrogeology of Australia map and supporting report since first published more than 35 years ago.</div><div>&nbsp;</div><div>Known as the National Hydrogeological Inventory (NHI), this new online mapping application delivers consistent national-scale synthesis of hydrogeological and related data and information for the nation's 42 major groundwater provinces. Accessible via the Geoscience Australia Data Discovery Portal, the NHI provides an enhanced and updated picture of groundwater systems across Australia, giving us a broader understanding of the communities, industries, and environments that rely on access to groundwater. This presentation uncovers the story behind the development of the inventory, looking at why it was developed, the type of information it contains, and plans for further improvements as part of the new Resourcing Australia's Prosperity Initiative.</div><div> </div>

  • A compilation of thematic summaries of 42 Australian Groundwater Provinces. These consistently compiled 42 summaries comprise the National Hydrogeological Inventory. The layer provides the polygons for each groundwater province in the inventory and thematic information for each province, including location and administration information, demographics, physical geography, surface water, geology, hydrogeology, groundwater, groundwater management and use, environment, land use and industry types and scientific stimulus.

  • This Tasmania Basin dataset contains descriptive attribute information for the areas bounded by the relevant spatial groundwater feature in the associated Hydrogeology Index map. Descriptive topics are grouped into the following themes: Location and administration; Demographics; Physical geography; Surface water; Geology; Hydrogeology; Groundwater; Groundwater management and use; Environment; Land use and industry types; and Scientific stimulus. The Late Carboniferous to Late Triassic Tasmania Basin covers approximately 30,000 square kilometres of onshore Tasmania. The basin contains up to 1500 m of mostly flat-lying sedimentary rocks, and these are divided into two distinct lithostratigraphic units, the Lower and the Upper Parmeener Supergroup. The Lower Parmeener Supergroup comprises Late Carboniferous to Permian rocks that mainly formed in marine environments. The most common rock types in this unit are mudstone, siltstone and sandstone, with less common limestone, conglomerate, coal, oil shale and tillite. The Upper Parmeener Supergroup consists predominantly of non-marine rocks, typically formed in fluvial and lacustrine environments. Common rock types include sandstone, siltstone, mudstone and minor basalt layers. Post-deposition the rocks of the Parmeener Supergroup experienced several major geological events, including the widespread intrusion of tholeiitic dolerite magma during the Middle Jurassic.