Mineralogy and Crystallography
Type of resources
Keywords
Publication year
Topics
-
Heavy minerals (HMs) are minerals with a specific gravity greater than 2.9 g/cm3. They are commonly highly resistant to physical and chemical weathering, and therefore persist in sediments as lasting indicators of the (former) presence of the rocks they formed in. The presence/absence of certain HMs, their associations with other HMs, their concentration levels, and the geochemical patterns they form in maps or 3D models can be indicative of geological processes that contributed to their formation. Furthermore trace element and isotopic analyses of HMs have been used to vector to mineralisation or constrain timing of geological processes. The positive role of HMs in mineral exploration is well established in other countries, but comparatively little understood in Australia. Here we present the results of a pilot project that was designed to establish, test and assess a workflow to produce a HM map (or atlas of maps) and dataset for Australia. This would represent a critical step in the ability to detect anomalous HM patterns as it would establish the background HM characteristics (i.e., unrelated to mineralisation). Further the extremely rich dataset produced would be a valuable input into any future machine learning/big data-based prospectivity analysis. The pilot project consisted in selecting ten sites from the National Geochemical Survey of Australia (NGSA) and separating and analysing the HM contents from the 75-430 µm grain-size fraction of the top (0-10 cm depth) sediment samples. A workflow was established and tested based on the density separation of the HM-rich phase by combining a shake table and the use of dense liquids. The automated mineralogy quantification was performed on a TESCAN® Integrated Mineral Analyser (TIMA) that identified and mapped thousands of grains in a matter of minutes for each sample. The results indicated that: (1) the NGSA samples are appropriate for HM analysis; (2) over 40 HMs were effectively identified and quantified using TIMA automated quantitative mineralogy; (3) the resultant HMs’ mineralogy is consistent with the samples’ bulk geochemistry and regional geological setting; and (4) the HM makeup of the NGSA samples varied across the country, as shown by the mineral mounts and preliminary maps. Based on these observations, HM mapping of the continent using NGSA samples will likely result in coherent and interpretable geological patterns relating to bedrock lithology, metamorphic grade, degree of alteration and mineralisation. It could assist in geological investigations especially where outcrop is minimal, challenging to correctly attribute due to extensive weathering, or simply difficult to access. It is believed that a continental-scale HM atlas for Australia could assist in derisking mineral exploration and lead to investment, e.g., via tenement uptake, exploration, discovery and ultimately exploitation. As some HMs are hosts for technology critical elements such as rare earth elements, their systematic and internally consistent quantification and mapping could lead to resource discovery essential for a more sustainable, lower-carbon economy.
-
We describe a vision for a national-scale heavy mineral (HM) map generated through automated mineralogical identification and quantification of HMs contained in floodplain sediments from large catchments covering most of Australia. The composition of the sediments reflects the dominant rock types in each catchment, with the generally resistant HMs largely preserving the mineralogical fingerprint of their host protoliths through the weathering-transport-deposition cycle. Heavy mineral presence/absence, absolute and relative abundance, and co-occurrence are metrics useful to map, discover and interpret catchment lithotype(s), geodynamic setting, magmatism, metamorphic grade, alteration and/or mineralization. Underpinning this vision is a pilot project, focusing on a subset from the national sediment sample archive, which is used to demonstrate the feasibility of the larger, national-scale project. We preview a bespoke, cloud-based mineral network analysis (MNA) tool to visualize, explore and discover relationships between HMs as well as between them and geological settings or mineral deposits. We envisage that the Heavy Mineral Map of Australia and MNA tool will contribute significantly to mineral prospectivity analysis and modeling, particularly for technology critical elements and their host minerals, which are central to the global economy transitioning to a more sustainable, lower carbon energy model. The full, peer-reviewed article can be found here: Caritat, P. de, McInnes, B.I.A., Walker, A.T., Bastrakov, E., Rowins, S.M., Prent, A.M. 2022. The Heavy Mineral Map of Australia: vision and pilot project. Minerals, 12(8), 961, https://doi.org/10.3390/min12080961
-
The Hera Au–Pb–Zn–Ag deposit in the southeastern Cobar Basin of central New South Wales preserves calc-silicate veins/skarn and remnant carbonate/sandstone-hosted skarn within a reduced anchizonal Siluro-Devonian turbidite sequence. The skarn orebody distribution is controlled by a long-lived, basin margin fault system, that has intersected a sedimentary horizon dominated by siliciclastic turbidite, with lesser gritstone and thick sandstone intervals, and rare carbonate-bearing stratigraphy. Foliation (S1) envelopes the orebody and is crosscut by a series of late-stage east–west and north–south trending faults. Skarn at Hera displays mineralogical zonation along strike, from southern spessartine–grossular–biotite–actinolite-rich associations, to central diopside-rich–zoisite–actinolite/tremolite–grossular-bearing associations, through to the northern most tremolite–anorthite-rich (garnet-absent) association in remnant carbonate-rich lithologies and sandstone horizons; the northern lodes also display zonation down dip to garnet present associations at depth. High-T skarn assemblages are pervasively retrogressed to actinolite/tremolite–biotite-rich skarn and this retrograde phase is associated with the main pulse of sulfide mineralisation. The dominant sulfides are high-Fe-Mn sphalerite–galena–non-magnetic high-Fe pyrrhotite–chalcopyrite; pyrite, arsenopyrite and scheelite are locally abundant. The distribution of metals in part mimics the changing gangue mineralogy, with Au concentrated in the southern and lower northern lode systems and broadly inverse concentrations for Ag–Pb–Zn. Stable isotope data (O–H–S) from skarn amphiboles and associated sulfides are consistent with magmatic/basinal water and magmatic sulfur inputs, while hydrosilicates and sulfides from the wall rocks display elevated δD and mixed δ34S consistent with progressive mixing or dilution of original basinal/magmatic waters within the Hera deposit by unexchanged waters typical of low latitude (tropical) meteoritic waters. High precision titanite (U–Pb) and biotite (Ar–Ar) geochronology reveals a manifold orebody commencing with high-T skarn and retrograde Pb–Zn-rich skarn formation at ≥403 Ma, Au–low-Fe sphalerite mineralisation at 403.4 ± 1.1 Ma, foliation development remobilisation or new mineralisation at 390 ± 0.2 Ma followed by thrusting, orebody dismemberment at (384.8 ± 1.1 Ma) and remobilization or new mineralisation at 381.0 ± 2.2 Ma. The polymetallic nature of the Hera orebody is a result of multiple mineralizing events during extension and compression and involving both magmatic and likely basinal fluid/metal sources. <b>Citation:</b> Fitzherbert, Joel A., McKinnon, Adam R., Blevin, Phillip L., Waltenberg, Kathryn., Downes, Peter M., Wall, Corey., Matchan, Erin., Huang Huiqin., The Hera orebody: A complex distal (Au–Zn–Pb–Ag–Cu) skarn in the Cobar Basin of central New South Wales, Australia <i>Resource Geology,</i> Vol 71, Iss 4, pp296-319 <b>2021</b>. DOI: https://doi.org/10.1111/rge.12262
-
<div>Heavy minerals (HMs) are those with a specific gravity greater than 2.9 g/cc (e.g., anatase, zircon). They have been used successfully in mineral exploration programs outside Australia for decades [1 and refs therein]. Individual HMs and combinations, or co-occurrence, of HMs can be characteristic of lithology, degree of metamorphism, alteration, weathering or even mineralisation. These are termed indicator minerals, and have been used in exploration for gold, diamonds, mineral sands, nickel-copper, platinum group elements, volcanogenic massive sulfides, non-sulfide zinc, porphyry copper-molybdenum, uranium, tin-tungsten, and rare earth elements mineralization. Although there are proprietary HM sample assets held by industry in Australia, no extensive public-domain dataset of the natural distribution of HMs across the continent currently exists.</div><div> We describe a vision for a national-scale heavy mineral (HM) map generated through automated mineralogical identification and quantification of HMs contained in floodplain sediments from large catchments covering most of Australia [1]. These samples were collected as part of the National Geochemical Survey of Australia (NGSA; www.ga.gov.au/ngsa) and are archived in Geoscience Australia’s rock store. The composition of the sediments can be assumed to reflect the dominant rock and soil types within each catchment (and potentially those upstream), with the generally resistant HMs largely preserving the mineralogical fingerprint of their host protoliths through the weathering-transport-deposition cycle. </div><div> Underpinning this vision is a pilot project, focusing on a subset of NGSA to demonstrate the feasibility of the larger, national-scale project. Ten NGSA sediment samples were selected and both bulk and HM fractions were analysed for quantitative mineralogy using a Tescan® Integrated Mineral Analyzer (TIMA) at the John de Laeter Centre, Curtin University (Figure 1). Given the large and complex nature of the resultant HM dataset, we built a bespoke, cloud-based mineral network analysis (MNA) tool to visualise, explore and discover relationships between HMs, as well as between them and geological setting or mineral deposits. The pilot project affirmed our expectations that a rich and diverse mineralogical ecosystem will be revealed by expanding HM mapping to the continental scale. </div><div> A first partial data release in 2022 was the first milestone of the Heavy Mineral Map of Australia (HMMA) project. The area concerned is the Darling-Curnamona-Delamerian region of southeastern Australia, where the richly endowed Broken Hill mineral province lies. Here, we identified over 140 heavy minerals from 29 million individual mineral observations in 223 sediment samples. Using the MNA tool, one can quickly identify interesting base metal mineral associations and their spatial distributions (Figure 2).</div><div> We envisage that the Heavy Mineral Map of Australia and the MNA tool will contribute significantly to mineral prospectivity analysis and modelling in Australia, particularly for technology critical elements and their host minerals, which are central to the global economy transitioning to a more sustainable, decarbonised paradigm.</div><div><br></div>Figure 1. Distribution map of ten selected heavy minerals in the heavy mineral fractions of the ten NGSA pilot samples (pie charts), overlain on Australia’s geological regions (variable colors) [2]). Map projection: Albers equal area.</div><div><br></div><div>Figure 2. Graphical user interface for the Geoscience Australia MNA cloud-based visualization tool for the DCD project (https://geoscienceaustralia.shinyapps.io/HMMA-MNA/) showing the network for Zn minerals with the gahnite subnetwork highlighted (left) and the map of gahnite distribution (right).</div><div> <strong>References</strong></div><div>[1] Caritat et al., 2022, Minerals, 12(8), 961. https://doi.org/10.3390/min12080961 </div><div>[2] Blake & Kilgour, 1998, Geosci Aust. https://pid.geoscience.gov.au/dataset/ga/32366 </div><div><br></div>This Abstract was submitted/presented to the 2022 Mineral Prospectivity and Exploration Targeting (MinProXT 2022) webinar, Freiburg, Germany, 01 - 03 November (www.minproxt.com)
-
<div>Indicator minerals are those minerals that indicate the presence of a specific mineral deposit, alteration or lithology[1]. Their utility to the exploration industry has been demonstrated in a range of environments and across multiple deposit types including Cu-Au porphyry[2], Cu-Zn-Pb-Ag VMS[3] and Ni-Cu-PGE[4]. Recent developments in the field of SEM-EDS analysis have enabled the rapid quantitative identification of indicator minerals during regional sampling campaigns[4,5].</div><div>Despite the demonstrated utility of indicator minerals for diamond and base metal exploration in Canada, Russia and Africa, there are relatively few case studies published from Australian deposits. We present the results of an indicator mineral case study over the Julimar exploration project located 90 km NE of Perth. The Gonneville Ni-Cu-PGE deposit, discovered by Chalice Mining in 2020, is hosted within a ~30 km long belt of 2670 Ma ultramafic intrusions within the western margin of the Yilgarn Craton[6].</div><div>Stream sediments collected from drainage channels around the Gonneville deposit were analysed by quantitative mineralogy techniques to determine if a unique indicator mineral footprint exists there. Samples were processed and analysed for heavy minerals using a workflow developed for the Curtin University-Geoscience Australia Heavy Mineral Map of Australia project[7]. Results indicate elevated abundances of indicator minerals associated with ultramafic/mafic magmatism and Ni-sulfide mineralisation in the drainages within the Julimar project area, including pyrrhotite, pentlandite, pyrite and chromite. We conclude that indicator mineral studies using automated mineralogy are powerful, yet currently underutilised, tools for mineral exploration in Australian environments.</div><div>[1]McClenaghan, 2005. https://doi.org/10.1144/1467-7873/03-066 </div><div>[2]Hashmi et al., 2015. https://doi.org/10.1144/geochem2014-310 </div><div>[3]Lougheed et al., 2020. https://doi.org/10.3390/min10040310 </div><div>[4]McClenaghan & Cabri, 2011. https://doi.org/10.1144/1467-7873/10-IM-026 </div><div>[5]Porter et al., 2020. https://doi.org/10.1016/j.oregeorev.2020.103406 </div><div>[6]Lu et al., 2021. http://dx.doi.org/10.13140/RG.2.2.35768.47367 </div><div>[7]Caritat et al., 2022. https://doi.org/10.3390/min12080961 </div> This Abstract was submitted/presented to the 2023 Australian Exploration Geoscience Conference 13-18 Mar (https://2023.aegc.com.au/)
-
<div>Although heavy mineral exploration techniques have been successfully used as exploration vectors to ore deposits around the world, exploration case studies and pre-competitive datasets relevant to Australian conditions are relatively limited. The Heavy Mineral Map of Australia (HMMA) project is a novel analytical campaign to determine the abundance and distribution of heavy minerals (SG>2.9 g/cc) in 1315 floodplain sediment samples collected from catchments across Australia during Geoscience Australia’s National Geochemical Survey of Australia (NGSA) project. Archived NGSA samples, which originated from, on average, 60 to 80 cm depth in floodplain landforms, were sub-sampled and subjected to dense media separation and automated SEM-EDS analysis in the John de Laeter Centre at Curtin University. Mineral assay data from all 1315 drainage samples will be publicly released by the end of 2023. </div><div><br></div><div>An initial data package released in August 2022 contains mineralogical assay data for 223 samples from the Darling–Curnamona–Delamerian (DCD) region of south-eastern Australia. That package identified over 140 heavy minerals from 29 million individual mineral observations. The number of mineral observations generated during the project required development of a novel Mineral Network Analysis (MNA) tool to allow end users to discover, visualise and interpret mineral co-occurrence relationships, potentially useful in exploration vectoring and targeting. The MNA tool can also be used to rapidly search the heavy mineral database to locate observations of potential economic significance. The co-occurrence of Zn-minerals indicative of high-grade metamorphism of base metal mineralisation (e.g., gahnite (Zn-spinel), ecandrewsite (Zn-ilmenite) and zincostaurolite (Zn-aluminosilicate)) from the region surrounding Broken Hill demonstrated the utility of the method. Zn-mineral co-occurrences not associated with known mineralisation were also noted and may represent targeting opportunities. </div><div><br></div><div>Heavy mineral data from parts of Queensland are scheduled for a separate public release in December 2022 and will be presented at the conference. </div> This Abstract was submitted/presented to the 2023 Australian Exploration Geoscience Conference 13-18 Mar (https://2023.aegc.com.au/)
-
Geoscience Australia is currently assessing selected Australian sedimentary basins for their unconventional hydrocarbon resource potential, in collaboration with the Northern Territory and state governments. A study of the southern Georgina Basin is in progress, involving the compilation of a cross-border dataset of all accessible open file seismic, well, geological and geochemical data that will be publicly released in mid-2014. Major geochemical resampling of old wells has generated new information on source rock characteristics, kerogen kinetics, and gas and oil isotope geochemistry in the Georgina Basin. Preliminary 3D geology and 1D petroleum systems models have also been generated. Several cores from the Georgina Basin have been HyLogged by the geological surveys of Northern Territory, Queensland and New South Wales, using HyLogging facilities funded by AuScope Pty Ltd and CSIRO as part of the National Collaborative Research Infrastructure Strategy (NCRIS) and AuScope National Virtual Core Library (NVCL) Project. Geoscience Australia currently has a project underway to reprocess the raw HyLogging data using a common set of mineral scalars, to create an internally-consistent, basin-wide dataset. An initial composite HyLogging data package was publicly released in March 2014, including reprocessed data for 14 wells in the southern Georgina Basin, information about the processing methods used, and metadata. A second stage of the project will involve interpretation of the reprocessed data from these wells, to further examine the relationships between the spectroscopic and mineralogical properties measured by the HyLogger, and core total organic carbon (TOC), XRD, XRF and ICPMS compositional data, well log data, and biostratigraphic data. Initial work has indicated interesting trends, such as the apparent relationship between gamma intensity, core SWIR albedo (mean shortwave infrared reflectance) and quartz content. Peaks in gamma intensity broadly align with troughs in albedo, suggesting that the reduced albedo is a result of increased TOC content. However, in others cores (or even the same core), peaks in gamma intensity also appear to correlate with potassium-rich phases such as white micas and other clay minerals, thus the gamma correlation does not appear straightforward. Other preliminary observations indicate that using HyLogging data provides (i) the opportunity to review the existing formation picks in the basin from a mineralogical perspective, (ii) new information on variations in calcite/dolomite proportions in the carbonate sequences, (iii) the ability to map apatite distribution, and (iv) mineralogical evidence of sedimentary cyclicity. It is thus hoped that integrated interpretation of the HyLogging data and other data types will enable clearer delineation of the lower Arthur Creek Formation (and the 'Hot Shale' within) in the Georgina Basin, and therefore assist in constraining target intervals for future unconventional hydrocarbon resource assessments.
-
Bulk quantitative mineralogy of regolith is a useful indicator of lithological precursor (protolith), degree of weathering, and soil properties affecting various potential landuse decisions. To date, no national-scale maps of regolith mineralogy are available in Australia. Catchment outlet sediments collected over 80% of the continent as part of the National Geochemical Survey of Australia (NGSA) afford a unique opportunity to rapidly and cost-effectively determine regolith mineralogy using the archived sample material. This report releases mineralogical data and metadata obtained as part of a feasibility study in a selected pilot area for such a national regolith mineralogy database and atlas. The area chosen for this study is within the Darling-Curnamona-Delamerian (DCD) region of southeastern Australia. The DCD region was selected as a ‘deep-dive’ data acquisition and analysis by the Exploration for the Future (2020-2024) federal government initiative managed at Geoscience Australia. One hundred NGSA sites from the DCD region were prepared for X-Ray Diffraction (XRD) analysis, which consisted of qualitative mineral identification of the bulk samples (i.e., ‘major’ minerals), qualitative clay mineral identification of the <2 µm grain-size fraction, and quantitative analysis of both ‘major’ and clay minerals of the bulk sample. The identified mineral phases were quartz, plagioclase, K-feldspar, calcite, dolomite, gypsum, halite, hematite, goethite, rutile, zeolite, amphibole, talc, kaolinite, illite (including muscovite and biotite), palygorskite (including interstratified illite-smectite and vermiculite), smectite (including interstratified illite-smectite), vermiculite, and chlorite. Poorly diffracting material (PDM) was also quantified and reported as ‘amorphous’. Mineral identification relied on the EVA® software, whilst quantification was performed using Siroquant®. Resulting mineral abundances are reported with a Chi-squared goodness-of-fit between the actual diffractogram and a modelled diffractogram for each sample, as well as an estimated standard error (esd) measurement of uncertainty for each mineral phase quantified. Sensitivity down to 0.1 wt% (weight percent) was achieved, with any mineral detection below that threshold reported as ‘trace’. Although detailed interpretation of the mineralogical data is outside the remit of the present data release, preliminary observations of mineral abundance patterns suggest a strong link to geology, including proximity to fresh bedrock, weathering during sediment transport, and robust relationships between mineralogy and geochemistry. The mineralogical data generated by this study are presented in Appendix A of this report and are downloadable as a .csv file. Mineral abundance or presence/absence maps are shown in Appendices B and C to document regional mineralogical patterns.