<div>The Petroleum Systems Summary database stores the compilation of the current understanding of petroleum systems information by basin across Australia. The Petroleum Systems Summary database and delivery tool provide high-level information of the current understanding of key petroleum systems for areas of interest. For example, geological studies in the Exploring for the Future (EFTF) program have included the Canning, McArthur and South Nicholson basins (Carr et al., 2016; Hashimoto et al., 2018). The database and tool aim to assist geological studies by summarising and interpreting key datasets related to conventional and unconventional hydrocarbon exploration. Each petroleum systems summary includes a synopsis of the basin and key figures detailing the basin outline, major structural components, data availability, petroleum systems events chart and stratigraphy, and a précis of the key elements of source, reservoir and seal. Standardisation of petroleum systems nomenclature establishes a framework for each basin after Bradshaw (1993) and Bradshaw et al. (1994), with the source-reservoir naming conventions adopted from Magoon and Dow (1994).&nbsp;</div><div><br></div><div>The resource is accessible via the Geoscience Australia Portal&nbsp;(https://portal.ga.gov.au/) via the Petroleum Systems Summary Tool (Edwards et al., 2020).</div>

<div>The Pacific Islands Applied Geoscience Commission (SOPAC) requested Geoscience Australia to compute International Terrestrial Reference Frame (ITRF) coordinates for 18 survey sites on islands in the northern Fiji archipelago from continuous geodetic GPS measurements observed from 8th July to 5th August 2008 inclusive. The GPS data was processed using version 5.0 of the Bernese GPS Software in a regional network together with selected IGS sites. The GPS solution was constrained to the ITRF2005 reference frame through adopting IGS05 coordinates on selected IGS reference sites and using the final IGS earth orientation parameters and satellite ephemerides products.</div><div>These coordinates provide the coordinate reference frame to be used to define Fiji’s claim to extended continental shelf under the provisions of Article 76 of the United Nations Convention on the Law of the Sea.</div><div><br></div>

<div>The wet tropospheric component and clock phase variations are the most important factors that limit the accuracy of the geodetic VLBI products. These fast fluctuations can be introduced into the parametric model as a correlated stochastic noise and treated in a special way using the least square collocation method (LSCM). An a-priori covariance function is used to construct the non-diagonal covariance matrix. We have developed a procedure to calculate the wet troposphere delay and the clock offset for each observation epoch. The wet troposphere delays calculated by the LSCM are in perfect agreement with the water vapour radiometer (WVR) data, within the uncertainty of 2-3 mm. This information is then incorporated into the NGS data file and used in the second iteration. As a result, the procedure for analysing the VLBI data becomes simpler and faster, since the remaining observational error is Gaussian, and the matrix of the observational covariance can be treated as diagonal. For the calibrated VLBI data, the simple least squares method (without breaking the 24-hour experiment into small bins) is applied, followed by a reduction in the number of estimated parameters. All VLBI data between 1993 and 2023 were processed with pre-calibrated tropospheric and clock delays. The result was tested with two independent software packages, OCCAM and VieVS, and showed a good efficiency with respect to the traditional approach. The accuracy of the estimates reaches: 1 mm for VLBI site positions, 3 µas for UT1-UTC values, 40 mas for X- and Y-pole components. The formal error of the most observed ICRF reference radio source positions drops to 1-2 µas, and the ”floor” (or ”inflated”) error for the future ICRF realization would also be reduced. This paper shows that the new data analysis procedure produces results which align with the announced VGOS goals for the S/X VLBI data. Finally we report a detection of the negative parallax effect with an amplitude of −15.8(±0.5) µas. Abstract presented at the 2024 13th General Meeting of the International VLBI Service for Geodesy and Astrometry (IVS), Tsukuba, Japan

<div>The integrity and strength of multi-technique terrestrial reference frames, such as realisations of the International Terrestrial Reference Frame (ITRF), depend on the precisely measured and expressed local-tie connections between space geodetic observing systems at co-located observatories. Australia has several observatories which together host the full variety of space geodetic observation techniques, including Global Navigation Satellites Systems (GNSS), Very Long Baseline Interferometry (VLBI), Satellite Laser Ranging (SLR) and Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) beacons.</div><div><br></div><div>This report documents the technical aspects of the local tie survey completed at the Mount Stromlo observatory, in Canberra in 2014. The aim of the survey was to precisely measure the local terrestrial connections between the space-based geodetic observing systems co-located at the observatory, which include 3 International GNSS Service (IGS) stations, SLR and DORIS infrastructure. In particular, this report documents the indirect measurement of the SLR invariant reference point. Geoscience Australia has routinely performed classical terrestrial surveys at Mount Stromlo, including surveys in 1999, 2002 and 2003 (post-fire). A high precision survey was conducted between the survey pillars surrounding the SLR observatory. These survey pillars were monitored to ensure their stability as part of a consistent, stable terrestrial network from which local tie connections were made to the SLR and other observing systems. The relationship between points of interest included the millimetre level accurate connections and their associated variance covariance matrix.</div><div><br></div>

<div>The annual Asia Pacific Regional Geodetic Project (APRGP) GPS campaign is an activity of the Geodetic Reference Frame Working Group (WG) of the Regional Committee of United Nations Global Geospatial Information Management for Asia and the Pacific (UN-GGIM-AP). This document describes the data analysis of the APRGP GPS campaign undertaken between the 10th and 17nd of September 2023. Campaign GPS data collected at 124 sites in nine countries across the Asia Pacific region were processed using version 5.2 of the Bernese GNSS Software in a regional network together with selected IGS (International GNSS Service) sites. The GPS solution was constrained to the ITRF2020 reference frame by adopting IGS20 coordinates on selected IGS core reference sites and using the final IGS earth orientation parameters and satellite ephemerides products. The average of the root mean square repeatability of the station coordinates for the campaign was 2.5 mm, 2.5 mm and 6.9 &nbsp;mm in north, east and up components of station position respectively.</div><div><br></div>

Radio-loud quasars at high redshift (z ≥ 4) are rare objects in the universe and rarely observed with Very Long Baseline Interferometry (VLBI). But some of them have flux density sufficiently high for monitoring of their apparent position. The instability of the astrometric positions could be linked to the astrophysical process in the jetted active galactic nuclei in the early universe. Regular observations of the high-redshift quasars are used for estimating their apparent proper motion over several years. We have undertaken regular VLBI observations of several high-redshift quasars at 2.3 GHz (S band) and 8.4 GHz (X band) with a network of five radio telescopes: 40 m Yebes (Spain), 25 m Sheshan (China), and three 32 m telescopes of the Quasar VLBI Network (Russia)—Svetloe, Zelenchukskaya, and Badary. Additional facilities joined this network occasionally. The sources have also been observed in three sessions with the European VLBI Network in 2018–2019 and one Long Baseline Array experiment in 2018. In addition, several experiments conducted with the Very Long Baseline Array in 2017–2018 were used to improve the time sampling and the statistics. Based on these 37 astrometric VLBI experiments between 2017 and 2021, we estimated the apparent proper motions of four quasars: 0901+697, 1428+422, 1508+572, and 2101+600. Citation: Oleg Titov <i>et al </i>2023 <i>AJ</i><b> 165</b> 69

<div>The Australian Bureau of Meteorology (BoM), Geoscience Australia (GA) and the Pacific Community (SPC) work together on the Australian Aid funded Pacific Sea Level and Geodetic Monitoring Project (PSLGMP). The project is focused on determining the long-term variation in sea level through observation and analysis of changes in the height of the land (using Global Navigation Satellite System (GNSS) data) and changes in the sea level (using tide gauges managed and operated by the BoM. It is the role of GA and SPC to provide information about ‘absolute’ movement of the tide gauge (managed by BoM) using GNSS to continuously monitor land motion and using levelling (SPC) to measure the height difference between the tide gauge and GNSS pillar every 18 months. </div><div>Land movement caused by earthquakes, subsidence and surface uplift have an important effect on sea level observations at tide gauges. For example, a tide gauge connected to a pier which is subsiding at a rate of 5 mm per year would be observed as a rate of 5 mm per year of sea level rise at the tide gauge. Because of this, it is important to measure, and account for, the movement of land when measuring ‘absolute’ sea level variation - the change in the sea level relative to the centre of the Earth. Relative sea level variation on the other hand is measured relative to local buildings and landmass around the coastline.</div><div>Geoscience Australia’s work enables more accurate 'absolute' sea level estimates by providing observations of land motion which can be accounted for by BoM when analysing the tide gauge data.</div><div><br></div>

<div>Mineral prospectivity studies seek to map evidence of mineral system activity, with the aim of informing mineral exploration decisions and guiding exploration in the face of uncertainty. These studies leverage the growing volumes of information that are available to characterise the lithosphere by compiling covariate (or feature) grids that represent key mineral system ingredients. Previous studies have been categorised as either “knowledge-driven” or “data-driven” approaches depending on whether these grids are integrated via expert elicitation or by the empirical relationship to known mineralisation, respectively. However, to our knowledge, the underlying modelling framework and assumptions have not been systematically reviewed to understand how choices in the approach to the problem influence modelling outcomes. Here we show the broad mathematical equivalence in these approaches and highlight the limitations inherent when optimising to minimise misfit in potentially under-determined problems. We argue that advances in mineral prospectivity are more likely to be driven by careful consideration of the model selection problem. Focusing effort on model selection will not only drive more robust mineral prospectivity predictions but may also simultaneously refine our understanding of key mineral system processes. To build on these results, we present the Mineral Potential Toolkit; a software repository to facilitate feature engineering, statistical appraisal, and quantitative prospectivity modelling. The toolkit enables a novel approach that combines the best aspects of previous methods. Abstract presented to the 26th World Mining Congress 2023 (https://wmc2023.org/)

<div>On January 15, 2022, an ongoing eruption at the Hunga volcano generated a large explosion which resulted in a globally observed tsunami and atmospheric pressure wave. This paper presents time series observations of the event from Australia including 503 mean sea level pressure (MSLP) sensors and 111 tide gauges. Data is provided in its original format, which varies between data providers, and a post-processed format with consistent file structure and time-zone. High-pass filtered variants of the data are also provided to facilitate study of the pressure wave and tsunami. For a minority of tide gauges the raw sea level data cannot be provided, due to licence restrictions, but high-pass filtered data is always provided. The data provides an important historical record of the Hunga volcano pressure wave and tsunami in Australia. It will be useful for research in atmospheric and ocean waves associated with large volcanic eruptions. <b>Citation:</b> Davies, G., Wilson, K., Hague, B. et al. Australian atmospheric pressure and sea level data during the 2022 Hunga-Tonga Hunga-Ha’apai volcano tsunami. <i>Sci Data</i> <b>11</b>, 114 (2024). https://doi.org/10.1038/s41597-024-02949-2

<div>This data package contains interpretations of airborne electromagnetic (AEM) conductivity sections in the Exploring for the Future (EFTF) program’s Eastern Resources Corridor (ERC) study area, in south eastern Australia. Conductivity sections from 3 AEM surveys were interpreted to provide a continuous interpretation across the study area – the EFTF AusAEM ERC (Ley-Cooper, 2021), the Frome Embayment TEMPEST (Costelloe et al., 2012) and the MinEx CRC Mundi (Brodie, 2021) AEM surveys. Selected lines from the Frome Embayment TEMPEST and MinEx CRC Mundi surveys were chosen for interpretation to align with the 20&nbsp;km line-spaced EFTF AusAEM ERC survey (Figure 1).</div><div>The aim of this study was to interpret the AEM conductivity sections to develop a regional understanding of the near-surface stratigraphy and structural architecture. To ensure that the interpretations took into account the local geological features, the AEM conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This approach provides a near-surface fundamental regional geological framework to support more detailed investigations. </div><div>This study interpreted between the ground surface and 500&nbsp;m depth along almost 30,000 line kilometres of nominally 20&nbsp;km line-spaced AEM conductivity sections, across an area of approximately 550,000&nbsp;km2. These interpretations delineate the geo-electrical features that correspond to major chronostratigraphic boundaries, and capture detailed stratigraphic information associated with these boundaries. These interpretations produced approximately 170,000 depth estimate points or approximately 9,100 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for compliance with Geoscience Australia’s (GA) Estimates of Geological and Geophysical Surfaces (EGGS) database, the national repository for standardised depth estimate points. </div><div>Results from these interpretations provided support to stratigraphic drillhole targeting, as part of the Delamerian Margins NSW National Drilling Initiative campaign, a collaboration between GA’s EFTF program, the MinEx CRC National Drilling Initiative and the Geological Survey of New South Wales. The interpretations have applications in a wide range of disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. It is anticipated that these interpretations will benefit government, industry and academia with interest in the geology of the ERC region.</div>