From 1 - 7 / 7
  • Marine seismic surveys are a fundamental tool for geological mapping, including the exploration for offshore oil and gas resources, but the sound generated during these surveys is an acute source of noise in the marine environment. Growing concern and increasing scientific evidence about the potential impacts of underwater noise associated with marine seismic surveys presents an interdisciplinary challenge to multiple sectors including government, industries, scientists and environmental managers. To inform this issue, Geoscience Australia, in collaboration with Curtin University and CSIRO, published a literature review (Carroll et al. 2017) that summarised 70 peer-reviewed scientific studies that investigated the impacts of impulsive low-frequency sound on marine fish and invertebrates. Here we provide an updated, critical synthesis of recently published data to ensure that the Australian governments’ understanding of the potential impacts of seismic surveys on fisheries and the broader marine environment remains current. A significant body of scientific research into the effects of marine seismic sounds on the marine environment has been undertaken over the past four years and scientific knowledge in this area is continuing to improve. This is partly due to increased sophistication of experimental designs that integrate the controlled aspects of laboratory studies, with field-based (before-after-control-impact) studies. However, there remain several research issues and challenges associated with progressing our understanding of the full impact of marine seismic surveys on fisheries and the marine environment. These include the need to broaden the research to cover a wider range of marine species, and to expand our understanding to impacts at the population and ecosystem scale, rather than the individual organism. There is also a continued need for improved standardisation in terminology and measurement of sound exposure. To address the research gaps and issues, Geoscience Australia recommends measures including: 1) undertaking additional multidisciplinary co-designed scientific research to examine short and long term impacts on important life stages of key species (including protected and commercially important species); 2) gathering robust environmental baselines and time-series data to account for spatiotemporal variability in the marine environment and to help inform management and monitoring; 3) continuing to develop and refine standards for quantifying sound exposure; 4) modelling population and ecosystem consequences, and; 5) further studying the interaction of seismic signals with other stressors to better assess cumulative impacts. If applied these recommendations may advance the scientific evidence-base to better inform stakeholder engagement, environmental impact assessment and management of the potential impacts of seismic surveys on fisheries and the marine environment.

  • The values and distribution patterns of the strontium (Sr) isotope ratio 87Sr/86Sr in Earth surface materials is of use in the geological, environmental and social sciences. Ultimately, the 87Sr/86Sr ratio of any mineral or biological material reflects its value in the rock that is the parent material to the local soil and everything that lives in and on it. In Australia, there are few large-scale surveys of 87Sr/86Sr available, and here we report on a new, low-density dataset using 112 catchment outlet (floodplain) sediment samples covering 529,000 km2 of inland southeastern Australia (South Australia, New South Wales, Victoria). The coarse (<2 mm) fraction of bottom sediment samples (depth ~0.6-0.8 m) from the National Geochemical Survey of Australia were fully digested before Sr separation by chromatography and 87Sr/86Sr determination by multicollector-inductively coupled plasma-mass spectrometry. The results show a wide range of 87Sr/86Sr values from a minimum of 0.7089 to a maximum of 0.7511 (range 0.0422). The median 87Sr/86Sr (± robust standard deviation) is 0.7199 (± 0.0112), and the mean (± standard deviation) is 0.7220 (± 0.0106). The spatial patterns of the Sr isoscape observed are described and attributed to various geological sources and processes. Of note are the elevated (radiogenic) values (≥~0.7270; top quartile) contributed by (1) the Palaeozoic sedimentary country rock and (mostly felsic) igneous intrusions of the Lachlan geological region to the east of the study area; (2) the Palaeoproterozoic metamorphic rocks of the central Broken Hill region; both these sources contribute fluvial sediments into the study area; and (3) the Proterozoic to Palaeozoic rocks of the Kanmantoo, Adelaide, Gawler and Painter geological regions to the west of the area; these sources contribute radiogenic material to the region mostly by aeolian processes. Regions of low 87Sr/86Sr (≤~0.7130; bottom quartile) belong mainly to (1) a few central Murray Basin catchments; (2) some Darling Basin catchments in the northeast; and (3) a few Eromanga geological region-influenced catchments in the northwest of the study area. The new spatial dataset is publicly available through the Geoscience Australia portal (https://portal.ga.gov.au/restore/cd686f2d-c87b-41b8-8c4b-ca8af531ae7e).

  • The National Geochemical Survey of Australia (NGSA) is Australia’s first national-scale geochemical survey. It was delivered to the public on 30 June 2011, after almost five years of stakeholder engagement, strategic planning, sample collection, preparation and analysis, quality assurance/quality control, and preliminary data analytics. The project was comprehensively documented in seven initial open-file reports and six data and map sets, followed over the next decade by more than 70 well-cited scientific publications. This review compiles the body of work and knowledge that emanated from the project to-date as an indication of the impact the NGSA had over the decade 2011-2021. The geochemical fabric of Australia as never seen before has been revealed by the NGSA. This has spurred further research and stimulated the mineral exploration industry. This paper also critically looks at operational decisions taken at project time (2007-2011) that were good and perhaps – with the benefit of hindsight – not so good, with the intention of providing experiential advice for any future large-scale geochemical survey of Australia or elsewhere. Strengths of the NGSA included stakeholder engagement, holistic approach to a national survey, involvement of other geoscience agencies, collaboration on quality assurance with international partners, and targeted promotion of results. Weaknesses included gaining successful access to all parts of the nation, and management of sample processing in laboratories. <b>Citation:</b> Patrice de Caritat; The National Geochemical Survey of Australia: review and impact. <i>Geochemistry: Exploration, Environment, Analysis </i>2022;; 22 (4): geochem2022–032. doi: https://doi.org/10.1144/geochem2022-032 This article appears in multiple journals (Lyell Collection & GeoScienceWorld)

  • The Vegetation Structure classes dataset was derived from Vegetation Height Model (VHM) and Fractional Cover Model (FCM) LiDAR products. The National Vegetation Information System framework was used to classify vegetation height and canopy/cover density into (sub-)stratum, growth forms, and structural formation classes. The classifications contain descriptions and spatial extents of the vegetation types for the East Kimberley LiDAR survey area. The displayed classifications include 19 dominant structural formation classes, and 43 dominant sub-structural formation classes for lower-, mid-, and upper stratum. High resolution LiDAR imagery, including Digital Elevation Model (DEM), Canopy Height Model (CHM), Vegetation Height Model (VHM), Vegetation Cover Model (VCM) and Fractional Cover Model (FCM) surfaces were acquired for the East Kimberley area in June 2017. All the data were released in 2019 (Geoscience Australia, 2019). For the purposes of vegetation structure mapping, the two input datasets were resampled, classified and combined to produce a vegetation structure map for the East Kimberley area. The methods are described by Lawrie et al. (2012), with the following differences: • resampling used Focal Statistic Min in ArcGIS as it more accurately represented vegetation extent • VHM was used instead of CHM as CHM did not include low vegetation (i.e ground cover). • VHM and FCM were classified into height and foliage cover classes using the Australian Vegetation Attribute Manual (NVIS Technical Working Group, 2017). Authors acknowledge the tremendous work of the Geoscience Australia Elevation team who carried out post processing, classification, production, quality assurance and delivery of all released LiDAR data products (see Geoscience Australia, 2019). In particular, the authors thank Graham Hammond, Kevin Kennedy, Jonathan Weales, Grahaem Chiles, Robert Kay, Shane Crossman, and Simon Costelloe. Geoscience Australia, 2019. Kimberley East - LiDAR data. Geoscience Australia, Canberra. C7FDA017-80B2-4F98-8147-4D3E4DF595A2 https://pid.geoscience.gov.au/dataset/ga/129985 Lawrie, K.C., Brodie, R.S., Tan, K.P., Gibson, D., Magee, J., Clarke, J.D.A., Halas, L., Gow, L., Somerville, P., Apps, H.E., Christensen, N.B., Brodie, R.C., Abraham, J., Smith, M., Page, D., Dillon, P., Vanderzalm, J., Miotlinski, K., Hostetler, S., Davis, A., Ley-Cooper, A.Y., Schoning, G., Barry, K. and Levett, K. 2012. BHMAR Project: Data Acquisition, processing, analysis and interpretation methods. Geoscience Australia Record 2012/11. 826p. NVIS Technical Working Group. 2017 Chapter 4.0 NVIS attributes listed and described in detail. In: Australian Vegetation Attribute Manual: National. Vegetation Information System, Version 7.0. Department of the Environment and Energy, Canberra. Prep by Bolton, M.P., deLacey, C. and Bossard, K.B. (Eds).

  • The East Antarctic slope on the Sabrina margin has been shaped by diverse processes related to repeated glaciation. Differences in slope along this margin have driven variations in sedimentation that explain the gully morphology. Areas of lower slope angles have led to rapid sediment deposition during glacial expansion to the shelf edge, and subsequent sediment failure. Gullies in these areas are typically extremely U-shaped, initiate well below the shelf break, are relatively straight and long, and have low incision depths. Areas of higher slope angles enhance the flow of erosive turbidity currents during glaciations associated with the release of sediment-laden basal meltwaters. The meltwater flows create gullies that typically initiate at or near the shelf break, are V-shaped in profiles, have high sinuosity, deep incision depths and a relatively short down slope extent. The short down slope extent reflects a reduced sediment load associated with increased seawater entrainment as the slope becomes more concave in profile. These differences in gully morphology have important habitat implications, associated with differences in the structure and beta-diversity of the seafloor communities. This upper slope region also supports seafloor communities that are distinct from those on the adjacent shelf, highlighting the uniqueness of this environment for biodiversity. <b>Citation:</b> A.L. Post, P.E. O'Brien, S. Edwards, A.G. Carroll, K. Malakoff, L.K. Armand, Upper slope processes and seafloor ecosystems on the Sabrina continental slope, East Antarctica, <i>Marine Geology</i>, Volume 422, 2020, 106091, ISSN 0025-3227, https://doi.org/10.1016/j.margeo.2019.106091.

  • The map and underlying digital dataset provide national and regional-scale context for a wider variety of applications, including offshore industries, area-based environmental management, scientific research and public education. Australia’s Seabed Map is based on the revised AusBathyTopo 250m (Australia) 2023 grid (Beaman, 2023), the most comprehensive, continental-scale compilation of bathymetry data in the Australian region. The map extends across a vast area from 92°E to 172° E and 8°S to 60° S. This includes areas adjacent to the Australian continent and Tasmania, and surrounding Macquarie Island and the Australian Territories of Norfolk Island, Christmas Island, and Cocos (Keeling) Islands. Australia's marine jurisdiction offshore from the territory of Heard and McDonald Islands and the Australian Antarctic Territory are not included. The new map provides a complete three-dimensional picture of the seafloor and is a significant improvement since it was last revised in 2009. In particular, the map incorporates new innovations such as the use of earth observation data (satellite based) produced by Digital Earth Australia to improve coastline definition and present a seamless transition between land and sea. The data is compiled from 1582 individual surveys using multibeam echosounders, single-beam echosounders, LiDAR, or 3D seismic first returns, as well as higher-resolution regional compilations, and other source data including Electronic Navigation Charts and satellite derived bathymetry. The new map represents decades of data collection, analysis, investment and collaboration from Australia’s seabed mapping community. The 250 m resolution is only supported where direct bathymetric observations are sufficiently dense (e.g. where swath bathymetry data or digitised chart data exist). In many regions, this 250 m grid size is far in excess of the optimal grid size for some of the input data used. The AusBathyTopo250m grid and higher-resolution regional datasets are available on the AusSeabed Marine Data Portal as the AusBathyTopo Series. This map is not suitable for use as an aid to navigation, or to replace any products produced by the Australian Hydrographic Office. Medium: Digital PDF download.

  • Plutonium (Pu) interactions in the environment are highly complex. Site-specific variables play an integral role in determining the chemical and physical form of Pu, and its migration, bioavailability, and immobility. This paper aims to identify the key variables that can be used to highlight regions of radioecological sensitivity and guide remediation strategies in Australia. Plutonium is present in the Australian environment as a result of global fallout and the British nuclear testing program of 1952 – 1958 in central and west Australia (Maralinga and Monte Bello islands). We report the first systematic measurements of 239+240Pu and 238Pu activity concentrations in distal (≥1,000 km from test sites) catchment outlet sediments from Queensland, Australia. The average 239+240Pu activity concentration was 0.29 mBq.g -1 (n = 73 samples) with a maximum of 4.88 mBq.g -1. 238Pu/239+240Pu isotope ratios identified a large range (0.02 – 0.29 (RSD: 74%)) which is congruent with the heterogeneous nuclear material used for the British nuclear testing programme at Maralinga and Montebello Islands. The use of a modified PCA relying on non-linear distance correlation (dCorr) provided broader insight into the impact of environmental variables on the transport and migration of Pu in this soil system. Primary key environmental indicators of Pu presence were determined to be actinide/lanthanide/heavier transition metals, elevation, electrical conductivity (EC), CaO, SiO2, SO3, landform, geomorphology, land use, and climate explaining 81.7% of the variance of the system. Overall this highlighted that trace level Pu accumulations are associated with the coarse, refractive components of Australian soils, and are more likely regulated by the climate of the region and overall soil type. <b>Citation:</b> Megan Cook, Patrice de Caritat, Ross Kleinschmidt, Joёl Brugger, Vanessa NL. Wong, Future migration: Key environmental indicators of Pu accumulation in terrestrial sediments of Queensland, Australia,<i> Journal of Environmental Radioactivity</i>, Volumes 223–224, 2020, 106398,ISSN 0265-931X, https://doi.org/10.1016/j.jenvrad.2020.106398