A useful spin off of the soft photogrammetry is the opportunity to get one metre contours over the disturbed areas of the Island. For the north-east area of the Island 2km X 2km DEM contour tiles have been trialed in the CIGIS. Most are at a contour interval of 5 metres but tiles 2269 and 2469 have been done at a one metre contour interval. The DEM contours are surface contours. They pick up the reflective surface beneath the aircraft. The reflective surface may be the ground or it may be a dense vegetation canopy or rooftops etc. Further one metre contour coverage can be prepared on a cost recovered basis.

These datasets cover approximately 1990 sq km over the town of Bundaberg and the surrounding area in the Bundaberg Regional Council and are part of the 2011 Bundaberg LiDAR capture project. This project, undertaken by AAM Pty Limited on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las in ellipsoidal datum(LiDAR Data Exchange Format where strikes are classified as ground, non-ground, vegetation or building) - Classified las in AHD datum - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ASCII grid - 1 metre Digital Elevation Model (DEM) in ESRI grid - 0.25 metre contours in ESRI Shape

These datasets cover approximately 1100 sq km in the central sector of the Hinchinbrook Shire Council and over all of Orpheus Island and are part of the 2009 Tropical Coast LiDAR capture project. This project, undertaken by Fugro Spatial Solutions Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 2 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 0.25 metre contours in ESRI Shape

The CHM grid covers the whole of the Cocos (Keeling) Islands. It was provided by AAM Pty Ltd in 1km tiles which were then joined together using ESRI ArcMap. Each grid cell (2m x 2m) contains the maximum vegetation height in metres derived from the 2011 LiDAR aerial survey data.

These datasets cover approximately 1450 sq km in the northern and southern sectors of the Mackay Regional Council including a number of offshore islands and are part of the 2009 Tropical Coast LiDAR capture project. This project, undertaken by Fugro Spatial Solutions Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 2 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - LAS ground classified returns in XYZ - LAS non-ground classified returns in XYZ - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ASCII grid - 1 metre Digital Elevation Model (DEM) in ESRI grid - 0.25 metre contours in ESRI Shape

These datasets cover approximately 400 sq km in the central, northern and eastern sectors of the Townsville City Council and are part of the 2009 Tropical Coast LiDAR capture project. This project, undertaken by Fugro Spatial Solutions Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 2 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 0.25 metre contours in ESRI Shape

These datasets cover approximately 1400 sq km along the eastern sector of the Cassowary Coast Regional Council and are part of the 2009 North Queensland LiDAR capture project. This project, undertaken by Photomapping Services on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - 1 metre Digital Elevation Model (DEM) in ESRI grid - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in shapefile - 0.25 metre contours in ESRI Shape

These datasets cover approximately 5700 sq km in the eastern sector of the Fraser Coast Regional Council and all of Fraser Island and are part of the 2009 Fraser Coast LiDAR capture project. This project, undertaken by Vekta Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground or non-ground) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI ASCII grid - 0.25 metre contours in ESRI Shape

These datasets cover approximately 1650 sq km in the central sector of the Bundaberg Regional Council and are part of the 2009 Capricorn Coast LiDAR capture project. This project, undertaken by Fugro Spatial Solutions Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 2 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, non-ground or building) - LAS ground classified returns in XYZ - LAS non-ground classified returns in XYZ - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ASCII grid - 1 metre Digital Elevation Model (DEM) in ESRI grid - 0.25 metre contours in ESRI Shape

These datasets cover approximately 90 sq km over the Town of Doomadgee, straddling the boundary between the Burke and Doomadgee Shire Councils and are part of the 2010 Gulf LiDAR capture project. This project, undertaken by Vekta Pty Ltd on behalf of the Queensland Government captured highly accurate elevation data using LiDAR technology. Available dataset formats (in 1 kilometre tiles) are: - Classified las (LiDAR Data Exchange Format where strikes are classified as ground, vegetation or building) - 1 metre Digital Elevation Model (DEM) in ASCII xyz - 1 metre Digital Elevation Model (DEM) in ESRI grid - 1 metre Digital Elevation Model (DEM) in ASCII grid - 0.25 metre contours in ESRI Shape